[PATCH v4 00/17] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel

[PATCH v4 00/17] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel

[Marijn Suijten]

Bring up the SM6125 DPU now that all preliminary series (such as INTF
TE) have been merged (for me to test the hardware properly), and most
other conflicting work (barring ongoing catalog *improvements*) has made
its way in as well or is still being discussed.

The second part of the series complements that by immediately utilizing
this hardware in DT, and even enabling the MDSS/DSI nodes complete with
a 6.0" 1080x2520 panel for Sony's Seine PDX201 (Xperia 10 II).

The last patch ("sm6125-seine: Configure MDSS, DSI and panel") depends
on (an impending v2 of) my Sony panel collection series [1].

[1]: https://lore.kernel.org/linux-arm-msm/20230521-drm-panels-sony-v1-0-541c341d6bee@somainline.org/

---
Changes in v4:
- Require "throttle" clock in display-controller node bindings and
  provide it in DTS (this clock previously resulted in inexplicable
  pingpong timeouts, but that cannot be reproduced anymore);
- Split APPS IOMMU address-padding fix to a separate patch;
- Add new patch to remove wrong DSI1 output port in SM6350 and SM6375
  MDSS dt-bindings example;
- Link to v3: https://lore.kernel.org/r/20230718-sm6125-dpu-v3-0-6c5a56e99820@somainline.org

Changes in v3:
- Drop status="disabled" from MDSS dt-bindings example;
- Use "nom" instead of "svs" OPP for dsi-phy PD, matching downstream;
- Add "retention" OPP to dispcc PD;
- Reword dsi-phy required-opps documentation;
- Rebased on latest -next and fixed conflicts in DT and DPU catalog;
- Link to v2: https://lore.kernel.org/r/20230627-sm6125-dpu-v2-0-03e430a2078c@somainline.org

Changes in v2:
- Moved dispcc DT clock reordering to the right patch (--fixup on the
  wrong hash) (Dmitry, Konrad multiple times);
- Drop removal of GCC_DISP_AHB_CLK in dispcc bindings.  While it is
  unused in the current driver, it is likely used to ensure a guaranteed
  probe order between GCC and DISPCC downstream, as well as currently
  relying on the fact that GCC_DISP_AHB_CLK is CLK_IS_CRITICAL and never
  turned off (Bjorn);
- Add GCC_DISP_GPLL0_DIV_CLK_SRC at the end of the dispcc clock list to
  maintain some form of ABI stability (Krzysztof);
- Use SoC-prefix format for 14nm DSI PHY qcom,sm6125-dsi-phy-14nm
  compatible (Dmitry, Krzysztof);
- Add patch to drop unused regulators from QCM2290 14nm DSI PHY (Konrad,
  Dmitry);
- Reuse QCM2290 14nm DSI PHY config struct for SM6125 compatible
  (Konrad);
- s/sde/mdss in pdx201.dts pinctrl node names and labels (Konrad);
- Use MX power domain in DSI PHY with SVS OPP (Dmitry);
- Use CX power domain with (already-existing) OPP table in DSI CTRL
  (Konrad, Dmitry);
- Rebased on top of DPU catalog rework [1] by inlining macro
  invocations, and validated by diffing stripped dpu_hw_catalog.o that
  there are no unexpected changes;
- Unset min_llcc_ib because this platform has no LLCC (Konrad);
- Fix UBWC comment to mention "encoding" version (Dmitry);
- Reordered DT nodes to follow Konrad's requested sorting;
- Add power-domains and required-opps properties to dsi-phy-14nm.yaml;
- Link to v1: https://lore.kernel.org/r/20230624-sm6125-dpu-v1-0-1d5a638cebf2@somainline.org

The discussions and this list ran quite long, apologies if I missed or
mis-resolved anything in advance!

[1]: https://lore.kernel.org/linux-arm-msm/20230619212519.875673-1-dmitry.baryshkov@linaro.org/

---
Marijn Suijten (17):
      drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config
      arm64: dts: qcom: sm6125: Pad APPS IOMMU address to 8 characters
      arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
      dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example
      dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
      dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property
      dt-bindings: display/msm: dsi-controller-main: Document SM6125
      dt-bindings: display/msm: sc7180-dpu: Describe SM6125
      dt-bindings: display/msm: Add SM6125 MDSS
      drm/msm/dpu: Add SM6125 support
      drm/msm/mdss: Add SM6125 support
      dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
      drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125
      arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clock
      arm64: dts: qcom: sm6125: Add dispcc node
      arm64: dts: qcom: sm6125: Add display hardware nodes
      arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel

 .../bindings/clock/qcom,dispcc-sm6125.yaml         |  24 +-
 .../bindings/display/msm/dsi-controller-main.yaml  |   2 +
 .../bindings/display/msm/dsi-phy-14nm.yaml         |  11 +
 .../bindings/display/msm/qcom,sc7180-dpu.yaml      |   5 +-
 .../bindings/display/msm/qcom,sm6125-mdss.yaml     | 213 +++++++++++++++++
 .../bindings/display/msm/qcom,sm6350-mdss.yaml     |   7 -
 .../bindings/display/msm/qcom,sm6375-mdss.yaml     |   7 -
 .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts   |  59 +++++
 arch/arm64/boot/dts/qcom/sm6125.dtsi               | 257 +++++++++++++++++++--
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_5_4_sm6125.h | 236 +++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   7 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c              |   2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c         |   2 -
 drivers/gpu/drm/msm/msm_mdss.c                     |   8 +
 16 files changed, 804 insertions(+), 38 deletions(-)
---
base-commit: 535ce75f2d80a47ce5407681014cd5a976646e38
change-id: 20230624-sm6125-dpu-aedc9637ee7b

Best regards,
-- 
Marijn Suijten <marijn.suijten@somainline.org>

[PATCH v4 01/17] drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config

[Marijn Suijten]

The regulator setup was likely copied from other SoCs by mistake.  Just
like SM6125 the DSI PHY on this platform is not getting power from a
regulator but from the MX power domain.

Fixes: 572e9fd6d14a ("drm/msm/dsi: Add phy configuration for QCM2290")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 3ce45b023e63..31deda1c664a 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -1087,8 +1087,6 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = {
 
 const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = {
 	.has_phy_lane = true,
-	.regulator_data = dsi_phy_14nm_17mA_regulators,
-	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
 	.ops = {
 		.enable = dsi_14nm_phy_enable,
 		.disable = dsi_14nm_phy_disable,

-- 
2.41.0

[PATCH v4 02/17] arm64: dts: qcom: sm6125: Pad APPS IOMMU address to 8 characters

[Marijn Suijten]

APPS IOMMU is the only node in sm6125.dtsi that doesn't have its
address padded to 8 hexadecimals; fix this by prepending a 0.

Fixes: 8ddb4bc3d3b5 ("arm64: dts: qcom: sm6125: Configure APPS SMMU")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 6937c7ebdb81..7feb6feffa40 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -1209,7 +1209,7 @@ spmi_bus: spmi@1c40000 {
 
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0xc600000 0x80000>;
+			reg = <0x0c600000 0x80000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,

-- 
2.41.0

[PATCH v4 03/17] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg

[Marijn Suijten]

This node has always resided in the wrong spot, making it somewhat
harder to contribute new node entries while maintaining proper sorting
around it.  Move the node up to sit after hsusb_phy1 where it maintains
proper numerical sorting on the (first of its many) reg address
property.

Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 7feb6feffa40..cfd0901d4555 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -684,6 +684,24 @@ hsusb_phy1: phy@1613000 {
 			status = "disabled";
 		};
 
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x045f0000 0x7000>;
@@ -1189,24 +1207,6 @@ sram@4690000 {
 			reg = <0x04690000 0x10000>;
 		};
 
-		spmi_bus: spmi@1c40000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x01c40000 0x1100>,
-			      <0x01e00000 0x2000000>,
-			      <0x03e00000 0x100000>,
-			      <0x03f00000 0xa0000>,
-			      <0x01c0a000 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0c600000 0x80000>;

-- 
2.41.0

[PATCH v4 04/17] dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example

[Marijn Suijten]

Both SM6350 and SM6375 support only a single DSI link, and don't have a
corresponding dsi1 node in DTS.  Their examples should not suggest an
output interface port on the display-controller node to this inexistant
DSI host, with a dsi1_in label reference that doesn't exist in the
example either.

Fixes: 3b7502b0c205 ("dt-bindings: display/msm: Add SM6350 MDSS")
Fixes: 2a5c1021bc77 ("dt-bindings: display/msm: Add SM6375 MDSS")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml          | 7 -------
 .../devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml          | 7 -------
 2 files changed, 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
index ed0ad194d4ce..63962a8f2faf 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -131,13 +131,6 @@ examples:
                         remote-endpoint = <&dsi0_in>;
                     };
                 };
-
-                port@1 {
-                    reg = <1>;
-                    dpu_intf2_out: endpoint {
-                        remote-endpoint = <&dsi1_in>;
-                    };
-                };
             };
         };
 
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
index 76369a4f7c4d..595a9d56949c 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -132,13 +132,6 @@ examples:
                         remote-endpoint = <&dsi0_in>;
                     };
                 };
-
-                port@1 {
-                    reg = <1>;
-                    dpu_intf2_out: endpoint {
-                        remote-endpoint = <&dsi1_in>;
-                    };
-                };
             };
         };
 

-- 
2.41.0

Re: [PATCH v4 04/17] dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example

[Rob Herring]

On Sun, 23 Jul 2023 18:08:42 +0200, Marijn Suijten wrote:
> Both SM6350 and SM6375 support only a single DSI link, and don't have a
> corresponding dsi1 node in DTS.  Their examples should not suggest an
> output interface port on the display-controller node to this inexistant
> DSI host, with a dsi1_in label reference that doesn't exist in the
> example either.
> 
> Fixes: 3b7502b0c205 ("dt-bindings: display/msm: Add SM6350 MDSS")
> Fixes: 2a5c1021bc77 ("dt-bindings: display/msm: Add SM6375 MDSS")
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  .../devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml          | 7 -------
>  .../devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml          | 7 -------
>  2 files changed, 14 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 05/17] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock

[Marijn Suijten]

The "gcc_disp_gpll0_div_clk_src" clock is consumed by the driver, will
be passed from DT, and should be required by the bindings.

Fixes: 8397c9c0c26b ("dt-bindings: clock: add QCOM SM6125 display clock bindings")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
index 8a210c4c5f82..8fd29915bf2c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -29,6 +29,7 @@ properties:
       - description: Link clock from DP PHY
       - description: VCO DIV clock from DP PHY
       - description: AHB config clock from GCC
+      - description: GPLL0 div source from GCC
 
   clock-names:
     items:
@@ -39,6 +40,7 @@ properties:
       - const: dp_phy_pll_link_clk
       - const: dp_phy_pll_vco_div_clk
       - const: cfg_ahb_clk
+      - const: gcc_disp_gpll0_div_clk_src
 
   '#clock-cells':
     const: 1
@@ -72,14 +74,16 @@ examples:
                <&dsi1_phy 1>,
                <&dp_phy 0>,
                <&dp_phy 1>,
-               <&gcc GCC_DISP_AHB_CLK>;
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
       clock-names = "bi_tcxo",
                     "dsi0_phy_pll_out_byteclk",
                     "dsi0_phy_pll_out_dsiclk",
                     "dsi1_phy_pll_out_dsiclk",
                     "dp_phy_pll_link_clk",
                     "dp_phy_pll_vco_div_clk",
-                    "cfg_ahb_clk";
+                    "cfg_ahb_clk",
+                    "gcc_disp_gpll0_div_clk_src";
       #clock-cells = <1>;
       #power-domain-cells = <1>;
     };

-- 
2.41.0

[PATCH v4 06/17] dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property

[Marijn Suijten]

On SM6125 the dispcc block is gated behind VDDCX: allow this domain to
be configured.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../devicetree/bindings/clock/qcom,dispcc-sm6125.yaml    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
index 8fd29915bf2c..0a3ef7fd03fa 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -48,6 +48,16 @@ properties:
   '#power-domain-cells':
     const: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
   reg:
     maxItems: 1
 
@@ -65,9 +75,11 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
     #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@5f00000 {
       compatible = "qcom,sm6125-dispcc";
       reg = <0x5f00000 0x20000>;
+
       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
                <&dsi0_phy 0>,
                <&dsi0_phy 1>,
@@ -84,6 +96,10 @@ examples:
                     "dp_phy_pll_vco_div_clk",
                     "cfg_ahb_clk",
                     "gcc_disp_gpll0_div_clk_src";
+
+      required-opps = <&rpmhpd_opp_ret>;
+      power-domains = <&rpmpd SM6125_VDDCX>;
+
       #clock-cells = <1>;
       #power-domain-cells = <1>;
     };

-- 
2.41.0

[PATCH v4 07/17] dt-bindings: display/msm: dsi-controller-main: Document SM6125

[Marijn Suijten]

Document general compatibility of the DSI controller on SM6125.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 76270992305a..b8d1f2b7d541 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -27,6 +27,7 @@ properties:
               - qcom,sdm660-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
+              - qcom,sm6125-dsi-ctrl
               - qcom,sm6350-dsi-ctrl
               - qcom,sm6375-dsi-ctrl
               - qcom,sm8150-dsi-ctrl
@@ -305,6 +306,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-dsi-ctrl
+              - qcom,sm6125-dsi-ctrl
               - qcom,sm6350-dsi-ctrl
     then:
       properties:

-- 
2.41.0

[PATCH v4 08/17] dt-bindings: display/msm: sc7180-dpu: Describe SM6125

[Marijn Suijten]

SM6125 is identical to SM6375 including the throttle clock that is also
provided to the MDP node downstream.  Note that any SoC other than
SM6375 (currently SC7180 and SM6350) has an unconstrained maximum number
of clocks and could either pass or leave out this "throttle" clock.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
index 630b11480496..ea75f0f95d5c 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -15,6 +15,7 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-dpu
+      - qcom,sm6125-dpu
       - qcom,sm6350-dpu
       - qcom,sm6375-dpu
 
@@ -63,7 +64,9 @@ allOf:
   - if:
       properties:
         compatible:
-          const: qcom,sm6375-dpu
+          enum:
+            - qcom,sm6375-dpu
+            - qcom,sm6125-dpu
 
     then:
       properties:

-- 
2.41.0

[PATCH v4 09/17] dt-bindings: display/msm: Add SM6125 MDSS

[Marijn Suijten]

Document the SM6125 MDSS.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../bindings/display/msm/qcom,sm6125-mdss.yaml     | 213 +++++++++++++++++++++
 1 file changed, 213 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
new file mode 100644
index 000000000000..57f0e3647711
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6125 Display MDSS
+
+maintainers:
+  - Marijn Suijten <marijn.suijten@somainline.org>
+
+description:
+  SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6125-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6125-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6125-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6125-dsi-phy-14nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        compatible = "qcom,sm6125-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        iommus = <&apps_smmu 0x400 0x0>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6125-dpu";
+            reg = <0x05e01000 0x83208>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync",
+                          "throttle";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6125_VDDCX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                      <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6125_VDDCX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        phy@5e94400 {
+            compatible = "qcom,sm6125-dsi-phy-14nm";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface",
+                          "ref";
+
+            required-opps = <&rpmpd_opp_nom>;
+            power-domains = <&rpmpd SM6125_VDDMX>;
+        };
+    };
+...

-- 
2.41.0

[PATCH v4 10/17] drm/msm/dpu: Add SM6125 support

[Marijn Suijten]

Add definitions for the display hardware used on the Qualcomm SM6125
platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_5_4_sm6125.h | 236 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   7 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 4 files changed, 245 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_4_sm6125.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_4_sm6125.h
new file mode 100644
index 000000000000..5fddfcce6288
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_4_sm6125.h
@@ -0,0 +1,236 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2023 Marijn Suijten <marijn.suijten@somainline.org>. All rights reserved.
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DPU_5_4_SM6125_H
+#define _DPU_5_4_SM6125_H
+
+static const struct dpu_caps sm6125_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0x6,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.max_linewidth = 2160,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+	.max_hdeci_exp = MAX_HORZ_DECIMATION,
+	.max_vdeci_exp = MAX_VERT_DECIMATION,
+};
+
+static const struct dpu_ubwc_cfg sm6125_ubwc_cfg = {
+	.ubwc_version = DPU_HW_UBWC_VER_10,
+	.highest_bank_bit = 0x1,
+	.ubwc_swizzle = 0x1,
+};
+
+static const struct dpu_mdp_cfg sm6125_mdp = {
+	.name = "top_0",
+	.base = 0x0, .len = 0x45c,
+	.features = 0,
+	.clk_ctrls = {
+		[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+		[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+	},
+};
+
+static const struct dpu_ctl_cfg sm6125_ctl[] = {
+	{
+		.name = "ctl_0", .id = CTL_0,
+		.base = 0x1000, .len = 0x1e0,
+		.features = BIT(DPU_CTL_ACTIVE_CFG),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	}, {
+		.name = "ctl_1", .id = CTL_1,
+		.base = 0x1200, .len = 0x1e0,
+		.features = BIT(DPU_CTL_ACTIVE_CFG),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+	}, {
+		.name = "ctl_2", .id = CTL_2,
+		.base = 0x1400, .len = 0x1e0,
+		.features = BIT(DPU_CTL_ACTIVE_CFG),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+	}, {
+		.name = "ctl_3", .id = CTL_3,
+		.base = 0x1600, .len = 0x1e0,
+		.features = BIT(DPU_CTL_ACTIVE_CFG),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+	}, {
+		.name = "ctl_4", .id = CTL_4,
+		.base = 0x1800, .len = 0x1e0,
+		.features = BIT(DPU_CTL_ACTIVE_CFG),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+	}, {
+		.name = "ctl_5", .id = CTL_5,
+		.base = 0x1a00, .len = 0x1e0,
+		.features = BIT(DPU_CTL_ACTIVE_CFG),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+	},
+};
+
+static const struct dpu_sspp_cfg sm6125_sspp[] = {
+	{
+		.name = "sspp_0", .id = SSPP_VIG0,
+		.base = 0x4000, .len = 0x1f0,
+		.features = VIG_SM6125_MASK,
+		.sblk = &sm6125_vig_sblk_0,
+		.xin_id = 0,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG0,
+	}, {
+		.name = "sspp_8", .id = SSPP_DMA0,
+		.base = 0x24000, .len = 0x1f0,
+		.features = DMA_SDM845_MASK,
+		.sblk = &sdm845_dma_sblk_0,
+		.xin_id = 1,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA0,
+	}, {
+		.name = "sspp_9", .id = SSPP_DMA1,
+		.base = 0x26000, .len = 0x1f0,
+		.features = DMA_SDM845_MASK,
+		.sblk = &sdm845_dma_sblk_1,
+		.xin_id = 5,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA1,
+	},
+};
+
+static const struct dpu_lm_cfg sm6125_lm[] = {
+	{
+		.name = "lm_0", .id = LM_0,
+		.base = 0x44000, .len = 0x320,
+		.features = MIXER_QCM2290_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.pingpong = PINGPONG_0,
+		.dspp = DSPP_0,
+		.lm_pair = LM_1,
+	}, {
+		.name = "lm_1", .id = LM_1,
+		.base = 0x45000, .len = 0x320,
+		.features = MIXER_QCM2290_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.pingpong = PINGPONG_1,
+		.dspp = 0,
+		.lm_pair = LM_0,
+	},
+};
+
+static const struct dpu_dspp_cfg sm6125_dspp[] = {
+	{
+		.name = "dspp_0", .id = DSPP_0,
+		.base = 0x54000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	},
+};
+
+static const struct dpu_pingpong_cfg sm6125_pp[] = {
+	{
+		.name = "pingpong_0", .id = PINGPONG_0,
+		.base = 0x70000, .len = 0xd4,
+		.features = PINGPONG_SM8150_MASK,
+		.merge_3d = 0,
+		.sblk = &sdm845_pp_sblk,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+		.intr_rdptr = -1,
+	}, {
+		.name = "pingpong_1", .id = PINGPONG_1,
+		.base = 0x70800, .len = 0xd4,
+		.features = PINGPONG_SM8150_MASK,
+		.merge_3d = 0,
+		.sblk = &sdm845_pp_sblk,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+		.intr_rdptr = -1,
+	},
+};
+
+static const struct dpu_intf_cfg sm6125_intf[] = {
+	{
+		.name = "intf_0", .id = INTF_0,
+		.base = 0x6a000, .len = 0x280,
+		.features = INTF_SC7180_MASK,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
+		.intr_tear_rd_ptr = -1,
+	}, {
+		.name = "intf_1", .id = INTF_1,
+		.base = 0x6a800, .len = 0x2c0,
+		.features = INTF_SC7180_MASK,
+		.type = INTF_DSI,
+		.controller_id = 0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+		.intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2),
+	},
+};
+
+static const struct dpu_perf_cfg sm6125_perf_data = {
+	.max_bw_low = 4100000,
+	.max_bw_high = 4100000,
+	.min_core_ib = 2400000,
+	.min_llcc_ib = 0, /* No LLCC on this SoC */
+	.min_dram_ib = 800000,
+	.min_prefill_lines = 24,
+	.danger_lut_tbl = {0xf, 0xffff, 0x0},
+	.safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sm8150_qos_linear),
+		.entries = sm8150_qos_linear
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+		.entries = sc7180_qos_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_mdss_version sm6125_mdss_ver = {
+	.core_major_ver = 5,
+	.core_minor_ver = 4,
+};
+
+const struct dpu_mdss_cfg dpu_sm6125_cfg = {
+	.mdss_ver = &sm6125_mdss_ver,
+	.caps = &sm6125_dpu_caps,
+	.ubwc = &sm6125_ubwc_cfg,
+	.mdp = &sm6125_mdp,
+	.ctl_count = ARRAY_SIZE(sm6125_ctl),
+	.ctl = sm6125_ctl,
+	.sspp_count = ARRAY_SIZE(sm6125_sspp),
+	.sspp = sm6125_sspp,
+	.mixer_count = ARRAY_SIZE(sm6125_lm),
+	.mixer = sm6125_lm,
+	.dspp_count = ARRAY_SIZE(sm6125_dspp),
+	.dspp = sm6125_dspp,
+	.pingpong_count = ARRAY_SIZE(sm6125_pp),
+	.pingpong = sm6125_pp,
+	.intf_count = ARRAY_SIZE(sm6125_intf),
+	.intf = sm6125_intf,
+	.vbif_count = ARRAY_SIZE(sdm845_vbif),
+	.vbif = sdm845_vbif,
+	.perf = &sm6125_perf_data,
+	.mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
+		     BIT(MDP_SSPP_TOP0_INTR2) | \
+		     BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+		     BIT(MDP_INTF0_INTR) | \
+		     BIT(MDP_INTF1_INTR) | \
+		     BIT(MDP_INTF1_TEAR_INTR),
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 4fdef908bde4..f2aa4d7afae4 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -38,6 +38,9 @@
 #define VIG_SC7180_MASK \
 	(VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED4))
 
+#define VIG_SM6125_MASK \
+	(VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))
+
 #define VIG_SC7180_MASK_SDMA \
 	(VIG_SC7180_MASK | BIT(DPU_SSPP_SMART_DMA_V2))
 
@@ -380,6 +383,9 @@ static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 =
 static const struct dpu_sspp_sub_blks sm6115_vig_sblk_0 =
 				_VIG_SBLK(2, DPU_SSPP_SCALER_QSEED4);
 
+static const struct dpu_sspp_sub_blks sm6125_vig_sblk_0 =
+				_VIG_SBLK(3, DPU_SSPP_SCALER_QSEED3LITE);
+
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =
 				_VIG_SBLK(5, DPU_SSPP_SCALER_QSEED4);
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =
@@ -718,6 +724,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
 
 #include "catalog/dpu_5_0_sm8150.h"
 #include "catalog/dpu_5_1_sc8180x.h"
+#include "catalog/dpu_5_4_sm6125.h"
 
 #include "catalog/dpu_6_0_sm8250.h"
 #include "catalog/dpu_6_2_sc7180.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 8d18e535472b..ca2d6d3ed4ac 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -873,6 +873,7 @@ extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
 extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
 extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
+extern const struct dpu_mdss_cfg dpu_sm6125_cfg;
 extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
 extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
 extern const struct dpu_mdss_cfg dpu_sm6375_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 34a6f67932d3..7ba9428e943e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1282,6 +1282,7 @@ static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,sc8180x-dpu", .data = &dpu_sc8180x_cfg, },
 	{ .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
 	{ .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
+	{ .compatible = "qcom,sm6125-dpu", .data = &dpu_sm6125_cfg, },
 	{ .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
 	{ .compatible = "qcom,sm6375-dpu", .data = &dpu_sm6375_cfg, },
 	{ .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },

-- 
2.41.0

[PATCH v4 11/17] drm/msm/mdss: Add SM6125 support

[Marijn Suijten]

SM6125 has an UBWC 3.0 decoder but only an UBWC 1.0 encoder.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 drivers/gpu/drm/msm/msm_mdss.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index dd22d0bd1201..ad66ccf0b6e1 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -568,6 +568,13 @@ static const struct msm_mdss_data sm6115_data = {
 	.ubwc_static = 0x11f,
 };
 
+static const struct msm_mdss_data sm6125_data = {
+	.ubwc_version = UBWC_1_0,
+	.ubwc_dec_version = UBWC_3_0,
+	.ubwc_swizzle = 1,
+	.highest_bank_bit = 1,
+};
+
 static const struct msm_mdss_data sm8250_data = {
 	.ubwc_version = UBWC_4_0,
 	.ubwc_dec_version = UBWC_4_0,
@@ -589,6 +596,7 @@ static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,sc8180x-mdss", .data = &sc8180x_data },
 	{ .compatible = "qcom,sc8280xp-mdss", .data = &sc8280xp_data },
 	{ .compatible = "qcom,sm6115-mdss", .data = &sm6115_data },
+	{ .compatible = "qcom,sm6125-mdss", .data = &sm6125_data },
 	{ .compatible = "qcom,sm6350-mdss", .data = &sm6350_data },
 	{ .compatible = "qcom,sm6375-mdss", .data = &sm6350_data },
 	{ .compatible = "qcom,sm8150-mdss", .data = &sm8150_data },

-- 
2.41.0

[PATCH v4 12/17] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant

[Marijn Suijten]

Document availability of the 14nm DSI PHY on SM6125.  Note that this
compatible uses the SoC-suffix variant, intead of postfixing an
arbitrary number without the sm/sdm portion.  The PHY is not powered by
a vcca regulator like on most SoCs, but by the MX power domain that is
provided via the power-domains property and a single corresponding
required-opps.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../devicetree/bindings/display/msm/dsi-phy-14nm.yaml         | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index a43e11d3b00d..2361da5f6736 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -19,6 +19,7 @@ properties:
       - qcom,dsi-phy-14nm-2290
       - qcom,dsi-phy-14nm-660
       - qcom,dsi-phy-14nm-8953
+      - qcom,sm6125-dsi-phy-14nm
 
   reg:
     items:
@@ -35,6 +36,16 @@ properties:
   vcca-supply:
     description: Phandle to vcca regulator device node.
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for an optional power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
 required:
   - compatible
   - reg

-- 
2.41.0

[PATCH v4 13/17] drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125

[Marijn Suijten]

SM6125 features only a single PHY (despite a secondary PHY PLL source
being available to the disp_cc_mdss_pclk0_clk_src clock), and downstream
sources for this "trinket" SoC do not define the typical "vcca"
regulator to be available nor used.  This, including the register offset
is identical to QCM2290, whose config struct can trivially be reused.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 323498237ef4..f59cf2a47b4c 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -561,6 +561,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	  .data = &dsi_phy_14nm_660_cfgs },
 	{ .compatible = "qcom,dsi-phy-14nm-8953",
 	  .data = &dsi_phy_14nm_8953_cfgs },
+	{ .compatible = "qcom,sm6125-dsi-phy-14nm",
+	  .data = &dsi_phy_14nm_2290_cfgs },
 #endif
 #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
 	{ .compatible = "qcom,dsi-phy-10nm",

-- 
2.41.0

[PATCH v4 14/17] arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clock

[Marijn Suijten]

We have a working RPM XO clock; no other driver except rpmcc should be
parenting directly to the fixed-factor xo_board clock nor should it be
reachable by that global name.  Remove the name to that effect, so that
every clock relation is explicitly defined in DTS.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index cfd0901d4555..90e242ad7943 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -23,7 +23,6 @@ xo_board: xo-board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
-			clock-output-names = "xo_board";
 		};
 
 		sleep_clk: sleep-clk {
@@ -199,6 +198,8 @@ rpm_requests: rpm-requests {
 				rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
 					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
 				};
 
 				rpmpd: power-controller {
@@ -718,7 +719,7 @@ sdhc_1: mmc@4744000 {
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			iommus = <&apps_smmu 0x160 0x0>;
 
@@ -745,7 +746,7 @@ sdhc_2: mmc@4784000 {
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			iommus = <&apps_smmu 0x180 0x0>;
 

-- 
2.41.0

[PATCH v4 15/17] arm64: dts: qcom: sm6125: Add dispcc node

[Marijn Suijten]

Enable and configure the dispcc node on SM6125 for consumption by MDSS
later on.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 90e242ad7943..23d1284793d2 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
 #include <dt-bindings/clock/qcom,sm6125-gpucc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -1208,6 +1209,34 @@ sram@4690000 {
 			reg = <0x04690000 0x10000>;
 		};
 
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6125-dispcc";
+			reg = <0x05f00000 0x20000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "cfg_ahb_clk",
+				      "gcc_disp_gpll0_div_clk_src";
+
+			required-opps = <&rpmpd_opp_ret>;
+			power-domains = <&rpmpd SM6125_VDDCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0c600000 0x80000>;

-- 
2.41.0

[PATCH v4 16/17] arm64: dts: qcom: sm6125: Add display hardware nodes

[Marijn Suijten]

Add the DT nodes that describe the MDSS hardware on SM6125, containing
one MDP (display controller) together with a single DSI and DSI PHY.  No
DisplayPort support is added for now.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 193 ++++++++++++++++++++++++++++++++++-
 1 file changed, 191 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 23d1284793d2..ba1d716355bc 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -1209,13 +1209,202 @@ sram@4690000 {
 			reg = <0x04690000 0x10000>;
 		};
 
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,sm6125-mdss";
+			reg = <0x05e00000 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x400 0x0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@5e01000 {
+				compatible = "qcom,sm6125-dpu";
+				reg = <0x05e01000 0x83208>,
+				      <0x05eb0000 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "rot",
+					      "lut",
+					      "core",
+					      "vsync",
+					      "throttle";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SM6125_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+
+					opp-400000000 {
+						opp-hz = /bits/ 64 <400000000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x05e94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SM6125_VDDCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,sm6125-dsi-phy-14nm";
+				reg = <0x05e94400 0x100>,
+				      <0x05e94500 0x300>,
+				      <0x05e94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				required-opps = <&rpmpd_opp_nom>;
+				power-domains = <&rpmpd SM6125_VDDMX>;
+
+				status = "disabled";
+			};
+		};
+
 		dispcc: clock-controller@5f00000 {
 			compatible = "qcom,sm6125-dispcc";
 			reg = <0x05f00000 0x20000>;
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <0>,
-				 <0>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
 				 <0>,
 				 <0>,
 				 <0>,

-- 
2.41.0

[PATCH v4 17/17] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel

[Marijn Suijten]

Enable MDSS and DSI, and configure the Samsung SOFEF01-M ams597ut01
6.0" 1080x2520 panel.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts   | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 82b0da5bb794..62c3e6d8147c 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -179,6 +179,43 @@ &i2c3 {
 	/* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,sofef01-m-ams597ut01";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&pm6125_l12>;
+
+		pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>;
+		pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm6125_adc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
@@ -469,6 +506,28 @@ vol_down_n: vol-down-n-state {
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	mdss_te_active_sleep: mdss-te-active-sleep-state {
+		pins = "gpio89";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_dsi_active: mdss-dsi-active-state {
+		pins = "gpio90";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_sleep: mdss-dsi-sleep-state {
+		pins = "gpio90";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 };
 
 &usb3 {

-- 
2.41.0

Re: [PATCH v4 17/17] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel

[Rob Herring]

On Sun, Jul 23, 2023 at 11:09 AM Marijn Suijten
<marijn.suijten@somainline.org> wrote:
>
> Enable MDSS and DSI, and configure the Samsung SOFEF01-M ams597ut01
> 6.0" 1080x2520 panel.
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts   | 59 ++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> index 82b0da5bb794..62c3e6d8147c 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -179,6 +179,43 @@ &i2c3 {
>         /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
>  };
>
> +&mdss {
> +       status = "okay";
> +};
> +
> +&mdss_dsi0 {
> +       vdda-supply = <&pm6125_l18>;
> +       status = "okay";
> +
> +       panel@0 {
> +               compatible = "samsung,sofef01-m-ams597ut01";

This needs to be documented.

Rob

Re: [PATCH v4 00/17] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel

[Dmitry Baryshkov]

On Sun, 23 Jul 2023 18:08:38 +0200, Marijn Suijten wrote:
> Bring up the SM6125 DPU now that all preliminary series (such as INTF
> TE) have been merged (for me to test the hardware properly), and most
> other conflicting work (barring ongoing catalog *improvements*) has made
> its way in as well or is still being discussed.
> 
> The second part of the series complements that by immediately utilizing
> this hardware in DT, and even enabling the MDSS/DSI nodes complete with
> a 6.0" 1080x2520 panel for Sony's Seine PDX201 (Xperia 10 II).
> 
> [...]

Applied, thanks!

[01/17] drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config
        https://gitlab.freedesktop.org/lumag/msm/-/commit/a7e3fda5948a
[02/17] arm64: dts: qcom: sm6125: Pad APPS IOMMU address to 8 characters
        https://gitlab.freedesktop.org/lumag/msm/-/commit/b7d35a8eae54
[03/17] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
        https://gitlab.freedesktop.org/lumag/msm/-/commit/2be52ca96a71
[04/17] dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example
        https://gitlab.freedesktop.org/lumag/msm/-/commit/4be2c19261fc
[05/17] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
        https://gitlab.freedesktop.org/lumag/msm/-/commit/4f86e343f3c6
[06/17] dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property
        https://gitlab.freedesktop.org/lumag/msm/-/commit/91043642f28c
[07/17] dt-bindings: display/msm: dsi-controller-main: Document SM6125
        https://gitlab.freedesktop.org/lumag/msm/-/commit/cf5859476e5d
[08/17] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
        https://gitlab.freedesktop.org/lumag/msm/-/commit/04a664dffd19
[09/17] dt-bindings: display/msm: Add SM6125 MDSS
        https://gitlab.freedesktop.org/lumag/msm/-/commit/3bde3b8f8a04
[10/17] drm/msm/dpu: Add SM6125 support
        https://gitlab.freedesktop.org/lumag/msm/-/commit/76c5dffd0bc4
[11/17] drm/msm/mdss: Add SM6125 support
        https://gitlab.freedesktop.org/lumag/msm/-/commit/de50357565d3
[12/17] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
        https://gitlab.freedesktop.org/lumag/msm/-/commit/cdac445883cc
[13/17] drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125
        https://gitlab.freedesktop.org/lumag/msm/-/commit/7638d8059ace

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Re: [PATCH v4 00/17] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel

[Dmitry Baryshkov]

On 27/07/2023 15:22, Dmitry Baryshkov wrote:
> 
> On Sun, 23 Jul 2023 18:08:38 +0200, Marijn Suijten wrote:
>> Bring up the SM6125 DPU now that all preliminary series (such as INTF
>> TE) have been merged (for me to test the hardware properly), and most
>> other conflicting work (barring ongoing catalog *improvements*) has made
>> its way in as well or is still being discussed.
>>
>> The second part of the series complements that by immediately utilizing
>> this hardware in DT, and even enabling the MDSS/DSI nodes complete with
>> a 6.0" 1080x2520 panel for Sony's Seine PDX201 (Xperia 10 II).
>>
>> [...]
> 
> Applied, thanks!
> 
> [01/17] drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/a7e3fda5948a
> [02/17] arm64: dts: qcom: sm6125: Pad APPS IOMMU address to 8 characters
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/b7d35a8eae54
> [03/17] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/2be52ca96a71

Of course, these two patches sneaked in by the mistake, dropped them now.

> [04/17] dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/4be2c19261fc
> [05/17] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/4f86e343f3c6
> [06/17] dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/91043642f28c
> [07/17] dt-bindings: display/msm: dsi-controller-main: Document SM6125
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/cf5859476e5d
> [08/17] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/04a664dffd19
> [09/17] dt-bindings: display/msm: Add SM6125 MDSS
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/3bde3b8f8a04
> [10/17] drm/msm/dpu: Add SM6125 support
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/76c5dffd0bc4
> [11/17] drm/msm/mdss: Add SM6125 support
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/de50357565d3
> [12/17] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/cdac445883cc
> [13/17] drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125
>          https://gitlab.freedesktop.org/lumag/msm/-/commit/7638d8059ace
> 
> Best regards,

-- 
With best wishes
Dmitry

Re: [PATCH v4 00/17] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel

[Marijn Suijten]

On 2023-07-27 16:34:49, Dmitry Baryshkov wrote:
> On 27/07/2023 15:22, Dmitry Baryshkov wrote:
> > 
> > On Sun, 23 Jul 2023 18:08:38 +0200, Marijn Suijten wrote:
> >> Bring up the SM6125 DPU now that all preliminary series (such as INTF
> >> TE) have been merged (for me to test the hardware properly), and most
> >> other conflicting work (barring ongoing catalog *improvements*) has made
> >> its way in as well or is still being discussed.
> >>
> >> The second part of the series complements that by immediately utilizing
> >> this hardware in DT, and even enabling the MDSS/DSI nodes complete with
> >> a 6.0" 1080x2520 panel for Sony's Seine PDX201 (Xperia 10 II).
> >>
> >> [...]
> > 
> > Applied, thanks!
> > 
> > [01/17] drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/a7e3fda5948a
> > [02/17] arm64: dts: qcom: sm6125: Pad APPS IOMMU address to 8 characters
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/b7d35a8eae54
> > [03/17] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/2be52ca96a71
> 
> Of course, these two patches sneaked in by the mistake, dropped them now.

Lovely, glad to have that resolved so quickly.  Thanks!

- Marijn

> 
> > [04/17] dt-bindings: display/msm: Remove DSI1 ports from SM6350/SM6375 example
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/4be2c19261fc
> > [05/17] dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/4f86e343f3c6
> > [06/17] dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/91043642f28c
> > [07/17] dt-bindings: display/msm: dsi-controller-main: Document SM6125
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/cf5859476e5d
> > [08/17] dt-bindings: display/msm: sc7180-dpu: Describe SM6125
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/04a664dffd19
> > [09/17] dt-bindings: display/msm: Add SM6125 MDSS
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/3bde3b8f8a04
> > [10/17] drm/msm/dpu: Add SM6125 support
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/76c5dffd0bc4
> > [11/17] drm/msm/mdss: Add SM6125 support
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/de50357565d3
> > [12/17] dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/cdac445883cc
> > [13/17] drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125
> >          https://gitlab.freedesktop.org/lumag/msm/-/commit/7638d8059ace
> > 
> > Best regards,
> 
> -- 
> With best wishes
> Dmitry
> 

Re: (subset) [PATCH v4 00/17] drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel

[Bjorn Andersson]

On Sun, 23 Jul 2023 18:08:38 +0200, Marijn Suijten wrote:
> Bring up the SM6125 DPU now that all preliminary series (such as INTF
> TE) have been merged (for me to test the hardware properly), and most
> other conflicting work (barring ongoing catalog *improvements*) has made
> its way in as well or is still being discussed.
> 
> The second part of the series complements that by immediately utilizing
> this hardware in DT, and even enabling the MDSS/DSI nodes complete with
> a 6.0" 1080x2520 panel for Sony's Seine PDX201 (Xperia 10 II).
> 
> [...]

Applied, thanks!

[02/17] arm64: dts: qcom: sm6125: Pad APPS IOMMU address to 8 characters
        commit: 310cdafc4a56827d1aeda7cc297939034adb8f99
[03/17] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
        commit: 3d06cee2249f4764f01a9f602ec1cc1bf4562ca6
[14/17] arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clock
        commit: cbe82d7d0b149aa9c0c000f7ffd2b18bfd248d35
[15/17] arm64: dts: qcom: sm6125: Add dispcc node
        commit: 4988881ec067c3e6d382de1583b7f5b1095ddea2
[16/17] arm64: dts: qcom: sm6125: Add display hardware nodes
        commit: 0865d23a02260a76963bd18d9ae603e77cdd0eba
[17/17] arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
        commit: 5078dfe3c5c7b8d2d6494c26de81a4f3d4a5a3d7

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>