Re: [PATCH v3 1/4] dt-bindings: input: touchscreen: goodix: Document AVDD28-supply property

[Rob Herring <robh@kernel.org>]

On Fri, Jan 18, 2019 at 10:01 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Wed, Jan 9, 2019 at 7:08 PM Rob Herring <robh@kernel.org> wrote:
> >
> > Please CC DT list if you want bindings reviewed.
>
> Sorry I forgot.
>
> >
> > On Wed, Jan 9, 2019 at 1:40 AM Dmitry Torokhov
> > <dmitry.torokhov@gmail.com> wrote:
> > >
> > > On Sat, Dec 15, 2018 at 08:47:59PM +0530, Jagan Teki wrote:
> > > > Most of the Goodix CTP controllers are supply with AVDD28 pin.
> > > > which need to supply for controllers like GT5663 on some boards
> > > > to trigger the power.
> > > >
> > > > So, document the supply property so-that the require boards
> > > > that used on GT5663 can enable it via device tree.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > ---
> > > >  Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > index f7e95c52f3c7..c4622c983e08 100644
> > > > --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > > > @@ -23,6 +23,7 @@ Optional properties:
> > > >   - touchscreen-inverted-y  : Y axis is inverted (boolean)
> > > >   - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
> > > >                               (swapping is done after inverting the axis)
> > > > + - AVDD28-supply     : Analog power supply regulator on AVDD28 pin
> > >
> > > I think we normally use lower case in DT bindings and rarely encode
> > > voltage in the supply name unless we are dealing with several supplies
> > > of the same kind, but I'll let Ron comment on this.
> >
> > Yes on lowercase though there are some exceptions.
> >
> > There's also a AVDD22 supply as well as DVDD12 and VDDIO. So we
> > probably need to keep the voltage, but the binding is incomplete.
>
> What is incomplete here? can you please elaborate.

You are missing the 3 other supplies the chip has: AVDD22, DVDD12 and VDDIO.

Rob