From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v3 1/4] dt-bindings: net: Add TI WiLink shared transport binding Date: Wed, 19 Apr 2017 15:49:28 -0500 Message-ID: References: <20170413150353.7389-1-robh@kernel.org> <20170413150353.7389-2-robh@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: Sender: linux-bluetooth-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Adam Ford Cc: Mark Rutland , Johan Hedberg , Wei Xu , Eyal Reizer , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "open list:BLUETOOTH DRIVERS" , Gustavo Padovan , Marcel Holtmann , Satish Patel , "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" , netdev List-Id: devicetree@vger.kernel.org On Sun, Apr 16, 2017 at 9:09 AM, Adam Ford wrote: > > > On Apr 13, 2017 10:04 AM, "Rob Herring" wrote: > > Add serial slave device binding for the TI WiLink series of Bluetooth/FM/GPS > devices. > > Signed-off-by: Rob Herring > Cc: Mark Rutland > Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > --- > v3: > - rebase on bluetooth-next > > .../devicetree/bindings/net/ti,wilink-st.txt | 35 > ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/ti,wilink-st.txt > > diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt > b/Documentation/devicetree/bindings/net/ti,wilink-st.txt > new file mode 100644 > index 000000000000..cbad73a84ac4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt > @@ -0,0 +1,35 @@ > +TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices > + > +TI WiLink devices have a UART interface for providing Bluetooth, FM radio, > +and GPS over what's called "shared transport". The shared transport is > +standard BT HCI protocol with additional channels for the other functions. > + > +These devices also have a separate WiFi interface as described in > +wireless/ti,wlcore.txt. > + > +This bindings follows the UART slave device binding in > +../serial/slave-device.txt. > + > +Required properties: > + - compatible: should be one of the following: > + "ti,wl1271-st" > + "ti,wl1273-st" > + "ti,wl1831-st" > + "ti,wl1835-st" > + "ti,wl1837-st" > + > > > Would you expect the wl1283 chipset too? Probably, but I left it out as there's no public information. > I can help test this if you like after the holiday weekend. I have a board > with WL1283 and currently using pdata-quirks to support it.