Re: [PATCH v3 3/4] gpio: loongson1: Add DT support

[Bartosz Golaszewski <brgl@bgdev.pl>]

On Wed, Mar 15, 2023 at 12:07 PM Keguang Zhang <keguang.zhang@gmail.com> wrote:
>
> This patch adds DT support for Loongson-1 GPIO driver.
>
> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> ---
> V2 -> V3: None
> V1 -> V2: Let gpiolib parse ngpios property
>           Remove unnecessary alias id parsing
>           Remove superfluous initialization done by bgpio_init()
>           Add MODULE_DEVICE_TABLE()
>           Other minor fixes
> ---
>  drivers/gpio/gpio-loongson1.c | 19 ++++++++++++++++---
>  1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpio/gpio-loongson1.c b/drivers/gpio/gpio-loongson1.c
> index dddfc71f0e10..6ca3b969db4d 100644
> --- a/drivers/gpio/gpio-loongson1.c
> +++ b/drivers/gpio/gpio-loongson1.c
> @@ -68,25 +68,38 @@ static int ls1x_gpio_probe(struct platform_device *pdev)
>         ls1x_gc->gc.owner = THIS_MODULE;
>         ls1x_gc->gc.request = ls1x_gpio_request;
>         ls1x_gc->gc.free = ls1x_gpio_free;
> -       ls1x_gc->gc.base = pdev->id * 32;
> +       /*
> +        * Clear ngpio to let gpiolib get the correct number
> +        * by reading ngpios property
> +        */
> +       ls1x_gc->gc.ngpio = 0;
>
>         ret = devm_gpiochip_add_data(dev, &ls1x_gc->gc, ls1x_gc);
>         if (ret)
>                 goto err;
>
>         platform_set_drvdata(pdev, ls1x_gc);
> -       dev_info(dev, "Loongson1 GPIO driver registered\n");
> +
> +       dev_info(dev, "GPIO controller registered with %d pins\n",
> +                ls1x_gc->gc.ngpio);
>
>         return 0;
>  err:
> -       dev_err(dev, "failed to register GPIO device\n");
> +       dev_err(dev, "failed to register GPIO controller\n");
>         return ret;
>  }
>
> +static const struct of_device_id ls1x_gpio_dt_ids[] = {
> +       { .compatible = "loongson,ls1x-gpio" },
> +       { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ls1x_gpio_dt_ids);
> +
>  static struct platform_driver ls1x_gpio_driver = {
>         .probe  = ls1x_gpio_probe,
>         .driver = {
>                 .name   = "ls1x-gpio",
> +               .of_match_table = ls1x_gpio_dt_ids,
>         },
>  };
>
> --
> 2.34.1
>

I applied this and the last one but switched patches 3 and 4 as it's
customary to have bindings in the tree before DT support.

Bart