Re: [PATCH v2 00/27] Add support for R40 HDMI pipeline

[Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>]

On Thu, Jun 14, 2018 at 10:59 PM, Jernej Škrabec
<jernej.skrabec-gGgVlfcn5nU@public.gmane.org> wrote:
> Dne četrtek, 14. junij 2018 ob 19:16:46 CEST je Jagan Teki napisal(a):
>> On Thu, Jun 14, 2018 at 8:04 PM, Jernej Škrabec <jernej.skrabec@siol.net>
> wrote:
>> > Dne četrtek, 14. junij 2018 ob 09:12:41 CEST je Jagan Teki napisal(a):
>> >> On Wed, Jun 13, 2018 at 1:30 AM, Jernej Skrabec <jernej.skrabec@siol.net>
>> >
>> > wrote:
>> >> > This series adds support for R40 HDMI pipeline. It is a bit special
>> >> > than other already supported pipelines because it has additional unit
>> >> > called TCON TOP responsible for relationship configuration between
>> >> > mixers, TCONs and HDMI. Additionally, it has additional gates for DSI
>> >> > and TV TCONs, TV encoder clock settings and pin muxing between LCD
>> >> > and TV encoders.
>> >> >
>> >> > However, it seems that TCON TOP will become a norm, since newer
>> >> > Allwinner SoCs like H6 also have this unit.
>> >> >
>> >> > I tested different possible configurations:
>> >> > - mixer0 <> TCON-TV0 <> HDMI
>> >> > - mixer0 <> TCON-TV1 <> HDMI
>> >> > - mixer1 <> TCON-TV0 <> HDMI
>> >> > - mixer1 <> TCON-TV1 <> HDMI
>> >> >
>> >> > Please review.
>> >> >
>> >> > Best regards,
>> >> > Jernej
>> >> >
>> >> > Changes from v1:
>> >> > - Split DT bindings patch and updated description
>> >> > - Split HDMI PHY patch
>> >> > - Move header file from TCON TOP patch to dt bindings patch
>> >> > - Added Rob reviewed-by tag
>> >> > - Used clk_hw_register_gate() instead of custom gate registration code
>> >> > - Reworked TCON TOP to be part of of-graph. Because of that, a lot of
>> >> >
>> >> >   new patches were added.
>> >> >
>> >> > - Droped mixer index quirk patch
>> >> > - Reworked TCON support for TCON TOP
>> >> > - Updated commit messages
>> >> >
>> >> > Jernej Skrabec (27):
>> >> >   clk: sunxi-ng: r40: Add minimal rate for video PLLs
>> >> >   clk: sunxi-ng: r40: Allow setting parent rate to display related
>> >> >
>> >> >     clocks
>> >> >
>> >> >   clk: sunxi-ng: r40: Export video PLLs
>> >> >   dt-bindings: display: sunxi-drm: Add TCON TOP description
>> >> >   drm/sun4i: Add TCON TOP driver
>> >> >   drm/sun4i: Fix releasing node when enumerating enpoints
>> >> >   drm/sun4i: Split out code for enumerating endpoints in output port
>> >> >   drm/sun4i: Add support for traversing graph with TCON TOP
>> >> >   drm/sun4i: Don't skip TCONs if they don't have channel 0
>> >> >   dt-bindings: display: sun4i-drm: Add R40 TV TCON description
>> >> >   drm/sun4i: tcon: Add support for tcon-top gate
>> >> >   drm/sun4i: tcon: Generalize engine search algorithm
>> >> >   drm/sun4i: Don't check for LVDS and RGB when TCON has only ch1
>> >> >   drm/sun4i: Don't check for panel or bridge on TV TCONs
>> >> >   drm/sun4i: Add support for R40 TV TCON
>> >> >   dt-bindings: display: sun4i-drm: Add R40 mixer compatibles
>> >> >   drm/sun4i: Add support for R40 mixers
>> >> >   dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHY
>> >> >   drm/sun4i: Enable DW HDMI PHY clock
>> >> >   drm/sun4i: Don't change clock bits in DW HDMI PHY driver
>> >> >   drm/sun4i: DW HDMI PHY: Add support for second PLL
>> >> >   drm/sun4i: Add support for second clock parent to DW HDMI PHY clk
>> >> >
>> >> >     driver
>> >> >
>> >> >   drm/sun4i: Add support for A64 HDMI PHY
>> >> >   drm: of: Export drm_crtc_port_mask()
>> >> >   drm/sun4i: DW HDMI: Expand algorithm for possible crtcs
>> >> >   ARM: dts: sun8i: r40: Add HDMI pipeline
>> >> >   ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra
>> >>
>> >> Tested whole series on top of linux-next.
>> >>
>> >> Tested-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
>> >
>> > Thanks!
>>
>> I've V40 board, which is same as R40. I'm able to detect the HDMI but
>> seems edid not detecting properly.
>>
>> [    0.983007] sun4i-drm display-engine: bound 1100000.mixer (ops
>> 0xc074a80c) [    0.999043] sun4i-drm display-engine: bound 1200000.mixer
>> (ops 0xc074a80c) [    1.006229] sun4i-drm display-engine: bound
>> 1c70000.tcon-top (ops 0xc074e2ac) [    1.013609] sun4i-drm display-engine:
>> bound 1c73000.lcd-controller (ops 0xc0747a28)
>> [    1.053988] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller
>> v1.32a with HDCP (sun8i_dw_hdmi_phy)
>> [    1.063913] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI
>> I2C bus driver
>> [    1.071683] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc074a298)
>> [    1.078484] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> [    1.085098] [drm] No driver support for vblank timestamp query. [
>> 1.091055] [drm] Cannot find any crtc or sizes
>> [    1.095995] [drm] Initialized sun4i-drm 1.0.0 20150629 for
>> display-engine on minor 0
>
> This seems like DT issue. Can you post somewhere your V40 DTSI (if it is
> different to R40) and board DTS?

same dtsi shared between r40 and v40, here is board dts support for HDMI[1]

[1] https://paste.ubuntu.com/p/wqVz38BHrM/

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.