[PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Jagan Teki]

ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.

It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.

Add dt-bingings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- updated to new dt-bindings style

 .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 000000000000..13764f13fe46
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
+
+  It has a flexible configuration of MIPI DSI signal input and
+  produce RGB565, RGB666, RGB888 output format.
+
+properties:
+  compatible:
+    enum:
+      - chipone,icn6211
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  reset-gpios:
+    description: GPIO connected for the reset pin
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        compatible = "chipone,icn6211";
+        reg = <0>;
+        reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          bridge_in: port@0 {
+            reg = <0>;
+
+            bridge_out_dsi: endpoint {
+              remote-endpoint = <&dsi_out_bridge>;
+            };
+          };
+
+          bridge_out: port@1 {
+            reg = <1>;
+
+            bridge_out_panel: endpoint {
+              remote-endpoint = <&panel_out_bridge>;
+            };
+          };
+        };
+      };
+    };
-- 
2.25.1

[PATCH v3 2/2] drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge

[Jagan Teki]

ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.

It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.

Add bridge driver for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- updated the driver to inline with new drm bridge style

 MAINTAINERS                              |   6 +
 drivers/gpu/drm/bridge/Kconfig           |  11 ++
 drivers/gpu/drm/bridge/Makefile          |   1 +
 drivers/gpu/drm/bridge/chipone-icn6211.c | 222 +++++++++++++++++++++++
 4 files changed, 240 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 9d241b832aae..4f1084aae50d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5529,6 +5529,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
 F:	drivers/gpu/drm/panel/panel-boe-himax8279d.c
 
+DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTOR BRIDGE
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	drivers/gpu/drm/bridge/chipone-icn6211.c
+F:	Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+
 DRM DRIVER FOR FARADAY TVE200 TV ENCODER
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index e4110d6ca7b3..49d1565b7f25 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -27,6 +27,17 @@ config DRM_CDNS_DSI
 	  Support Cadence DPI to DSI bridge. This is an internal
 	  bridge and is meant to be directly embedded in a SoC.
 
+config DRM_CHIPONE_ICN6211
+	tristate "Chipone ICN6211 MIPI-DSI/RGB Convertor bridge"
+	depends on OF
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	help
+	  ICN6211 is MIPI-DSI/RGB Convertor bridge from chipone.
+
+	  It has a flexible configuration of MIPI DSI signal input
+	  and produce RGB565, RGB666, RGB888 output format.
+
 config DRM_CHRONTEL_CH7033
 	tristate "Chrontel CH7033 Video Encoder"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 86e7acc76f8d..3eb84b638988 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
+obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
 obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
 obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
 obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
new file mode 100644
index 000000000000..3f478f21a4a5
--- /dev/null
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <video/mipi_display.h>
+
+struct chipone {
+	struct device *dev;
+	struct drm_bridge bridge;
+	struct drm_bridge *panel_bridge;
+	struct gpio_desc *reset_gpio;
+};
+
+static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct chipone, bridge);
+}
+
+static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge)
+{
+	return &bridge->encoder->crtc->state->adjusted_mode;
+}
+
+static void chipone_post_disable(struct drm_bridge *bridge)
+{
+	struct chipone *icn = bridge_to_chipone(bridge);
+
+	gpiod_set_value(icn->reset_gpio, 0);
+
+	msleep(50);
+}
+
+static inline int chipone_dsi_write(struct chipone *icn,  const void *seq,
+				    size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev);
+
+	return mipi_dsi_generic_write(dsi, seq, len);
+}
+
+#define CHIPONE_DSI(icn, seq...)				\
+	{							\
+		const u8 d[] = { seq };				\
+		chipone_dsi_write(icn, d, ARRAY_SIZE(d));	\
+	}
+
+static void chipone_enable(struct drm_bridge *bridge)
+{
+	struct chipone *icn = bridge_to_chipone(bridge);
+	struct drm_display_mode *mode = bridge_to_mode(bridge);
+
+	CHIPONE_DSI(icn, 0x7A, 0xC1);
+
+	/* lower 8 bits of hdisplay */
+	CHIPONE_DSI(icn, 0x20, mode->hdisplay & 0xff);
+
+	/* lower 8 bits of vdisplay */
+	CHIPONE_DSI(icn, 0x21, mode->vdisplay & 0xff);
+
+	/**
+	 * lsb nibble: 2nd nibble of hdisplay
+	 * msb nibble: 2nd nibble of vdisplay
+	 */
+	CHIPONE_DSI(icn, 0x22, (((mode->hdisplay >> 8) & 0xf) |
+		    (((mode->vdisplay >> 8) & 0xf) << 4)));
+
+	/* HFP */
+	CHIPONE_DSI(icn, 0x23, mode->hsync_start - mode->hdisplay);
+
+	/* HSYNC */
+	CHIPONE_DSI(icn, 0x24, mode->hsync_end - mode->hsync_start);
+
+	/* HBP */
+	CHIPONE_DSI(icn, 0x25, mode->htotal - mode->hsync_end);
+
+	CHIPONE_DSI(icn, 0x26, 0x00);
+
+	/* VFP */
+	CHIPONE_DSI(icn, 0x27, mode->vsync_start - mode->vdisplay);
+
+	/* VSYNC */
+	CHIPONE_DSI(icn, 0x28, mode->vsync_end - mode->vsync_start);
+
+	/* VBP */
+	CHIPONE_DSI(icn, 0x29, mode->vtotal - mode->vsync_end);
+
+	/* dsi specific sequence */
+	CHIPONE_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80);
+	CHIPONE_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28);
+	CHIPONE_DSI(icn, 0xB5, 0xA0);
+	CHIPONE_DSI(icn, 0x5C, 0xFF);
+	CHIPONE_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01);
+	CHIPONE_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92);
+	CHIPONE_DSI(icn, 0x6B, 0x71);
+	CHIPONE_DSI(icn, 0x69, 0x2B);
+	CHIPONE_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40);
+	CHIPONE_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98);
+
+	/* icn6211 specific sequence */
+	CHIPONE_DSI(icn, 0xB6, 0x20);
+	CHIPONE_DSI(icn, 0x51, 0x20);
+	CHIPONE_DSI(icn, 0x09, 0x10);
+
+	msleep(120);
+}
+
+static void chipone_pre_enable(struct drm_bridge *bridge)
+{
+	struct chipone *icn = bridge_to_chipone(bridge);
+
+	gpiod_set_value(icn->reset_gpio, 1);
+	msleep(20);
+
+	gpiod_set_value(icn->reset_gpio, 0);
+	msleep(20);
+
+	gpiod_set_value(icn->reset_gpio, 1);
+	msleep(50);
+}
+
+static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
+{
+	struct chipone *icn = bridge_to_chipone(bridge);
+
+	return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags);
+}
+
+static const struct drm_bridge_funcs chipone_bridge_funcs = {
+	.post_disable = chipone_post_disable,
+	.enable = chipone_enable,
+	.pre_enable = chipone_pre_enable,
+	.attach = chipone_attach,
+};
+
+static int chipone_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct drm_panel *panel;
+	struct chipone *icn;
+	int ret;
+
+	icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL);
+	if (!icn)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, icn);
+	icn->dev = dev;
+
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->lanes = 4;
+
+	icn->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(icn->reset_gpio)) {
+		DRM_DEV_ERROR(dev, "failed to get reset GPIO\n");
+		return PTR_ERR(icn->reset_gpio);
+	}
+
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
+	if (ret)
+		return ret;
+
+	icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+	if (IS_ERR(icn->panel_bridge))
+		return PTR_ERR(icn->panel_bridge);
+
+	icn->bridge.funcs = &chipone_bridge_funcs;
+	icn->bridge.type = DRM_MODE_CONNECTOR_DPI;
+	icn->bridge.of_node = dev->of_node;
+
+	drm_bridge_add(&icn->bridge);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		drm_bridge_remove(&icn->bridge);
+		dev_err(dev, "failed to attach dsi\n");
+	}
+
+	return ret;
+}
+
+static int chipone_remove(struct mipi_dsi_device *dsi)
+{
+	struct chipone *icn = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_bridge_remove(&icn->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id chipone_of_match[] = {
+	{ .compatible = "chipone,icn6211", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, chipone_of_match);
+
+static struct mipi_dsi_driver chipone_driver = {
+	.probe = chipone_probe,
+	.remove = chipone_remove,
+	.driver = {
+		.name = "chipone-icn6211",
+		.owner = THIS_MODULE,
+		.of_match_table = chipone_of_match,
+	},
+};
+module_mipi_dsi_driver(chipone_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
+MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Convertor Bridge");
+MODULE_LICENSE("GPL");
-- 
2.25.1

Re: [PATCH v3 2/2] drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge

[Robert Foss]

Hey Jagan,

Thanks for submitting this driver, it looks really nice, but
checkpatch.pl has some minor issues with it. Again I'd suggest
deferring to the convertor->converter spelling change even though both
seem to be perfectly valid English.

With the below fixed, feel free to add my r-b.
Reviewed-by: Robert Foss <robert.foss@linaro.org>

On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.

WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#6:
ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
                           ^^^^^^^^^


>
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
>
> Add bridge driver for it.

Currently this driver only supports MIPI_DSI_FMT_RGB888, maybe this
should be noted in the commit msg.

>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated the driver to inline with new drm bridge style
>
>  MAINTAINERS                              |   6 +
>  drivers/gpu/drm/bridge/Kconfig           |  11 ++
>  drivers/gpu/drm/bridge/Makefile          |   1 +
>  drivers/gpu/drm/bridge/chipone-icn6211.c | 222 +++++++++++++++++++++++
>  4 files changed, 240 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9d241b832aae..4f1084aae50d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5529,6 +5529,12 @@ S:       Maintained
>  F:     Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
>  F:     drivers/gpu/drm/panel/panel-boe-himax8279d.c
>
> +DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTOR BRIDGE

WARNING: 'CONVERTOR' may be misspelled - perhaps 'CONVERTER'?
#30: FILE: MAINTAINERS:5533:
+DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTOR BRIDGE
                                                ^^^^^^^^^


> +M:     Jagan Teki <jagan@amarulasolutions.com>
> +S:     Maintained
> +F:     drivers/gpu/drm/bridge/chipone-icn6211.c
> +F:     Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml

WARNING: Misordered MAINTAINERS entry - list file patterns in alphabetic order
#34: FILE: MAINTAINERS:5537:
+F:     drivers/gpu/drm/bridge/chipone-icn6211.c
+F:     Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml


> +
>  DRM DRIVER FOR FARADAY TVE200 TV ENCODER
>  M:     Linus Walleij <linus.walleij@linaro.org>
>  S:     Maintained
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index e4110d6ca7b3..49d1565b7f25 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -27,6 +27,17 @@ config DRM_CDNS_DSI
>           Support Cadence DPI to DSI bridge. This is an internal
>           bridge and is meant to be directly embedded in a SoC.
>
> +config DRM_CHIPONE_ICN6211
> +       tristate "Chipone ICN6211 MIPI-DSI/RGB Convertor bridge"

WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#48: FILE: drivers/gpu/drm/bridge/Kconfig:31:
+       tristate "Chipone ICN6211 MIPI-DSI/RGB Convertor bridge"
                                               ^^^^^^^^^


> +       depends on OF
> +       select DRM_MIPI_DSI
> +       select DRM_PANEL_BRIDGE
> +       help
> +         ICN6211 is MIPI-DSI/RGB Convertor bridge from chipone.

WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#53: FILE: drivers/gpu/drm/bridge/Kconfig:36:
+         ICN6211 is MIPI-DSI/RGB Convertor bridge from chipone.
                                  ^^^^^^^^^

> +
> +         It has a flexible configuration of MIPI DSI signal input
> +         and produce RGB565, RGB666, RGB888 output format.
> +

WARNING: please write a paragraph that describes the config symbol fully
#47: FILE: drivers/gpu/drm/bridge/Kconfig:30:
+config DRM_CHIPONE_ICN6211


>  config DRM_CHRONTEL_CH7033
>         tristate "Chrontel CH7033 Video Encoder"
>         depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 86e7acc76f8d..3eb84b638988 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -1,5 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
> +obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
>  obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
>  obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
>  obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
> diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
> new file mode 100644
> index 000000000000..3f478f21a4a5
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
> @@ -0,0 +1,222 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2020 Amarula Solutions(India)

2020-2021?

> + * Author: Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include <drm/drm_of.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_mipi_dsi.h>
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +
> +#include <video/mipi_display.h>
> +
> +struct chipone {
> +       struct device *dev;
> +       struct drm_bridge bridge;
> +       struct drm_bridge *panel_bridge;
> +       struct gpio_desc *reset_gpio;
> +};
> +
> +static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
> +{
> +       return container_of(bridge, struct chipone, bridge);
> +}
> +
> +static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge)
> +{
> +       return &bridge->encoder->crtc->state->adjusted_mode;
> +}
> +
> +static void chipone_post_disable(struct drm_bridge *bridge)
> +{
> +       struct chipone *icn = bridge_to_chipone(bridge);
> +
> +       gpiod_set_value(icn->reset_gpio, 0);
> +
> +       msleep(50);
> +}
> +
> +static inline int chipone_dsi_write(struct chipone *icn,  const void *seq,
> +                                   size_t len)
> +{
> +       struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev);
> +
> +       return mipi_dsi_generic_write(dsi, seq, len);
> +}
> +
> +#define CHIPONE_DSI(icn, seq...)                               \
> +       {                                                       \
> +               const u8 d[] = { seq };                         \
> +               chipone_dsi_write(icn, d, ARRAY_SIZE(d));       \
> +       }
> +
> +static void chipone_enable(struct drm_bridge *bridge)
> +{
> +       struct chipone *icn = bridge_to_chipone(bridge);
> +       struct drm_display_mode *mode = bridge_to_mode(bridge);
> +
> +       CHIPONE_DSI(icn, 0x7A, 0xC1);
> +
> +       /* lower 8 bits of hdisplay */
> +       CHIPONE_DSI(icn, 0x20, mode->hdisplay & 0xff);
> +
> +       /* lower 8 bits of vdisplay */
> +       CHIPONE_DSI(icn, 0x21, mode->vdisplay & 0xff);
> +
> +       /**
> +        * lsb nibble: 2nd nibble of hdisplay
> +        * msb nibble: 2nd nibble of vdisplay
> +        */
> +       CHIPONE_DSI(icn, 0x22, (((mode->hdisplay >> 8) & 0xf) |
> +                   (((mode->vdisplay >> 8) & 0xf) << 4)));
> +
> +       /* HFP */
> +       CHIPONE_DSI(icn, 0x23, mode->hsync_start - mode->hdisplay);
> +
> +       /* HSYNC */
> +       CHIPONE_DSI(icn, 0x24, mode->hsync_end - mode->hsync_start);
> +
> +       /* HBP */
> +       CHIPONE_DSI(icn, 0x25, mode->htotal - mode->hsync_end);
> +
> +       CHIPONE_DSI(icn, 0x26, 0x00);
> +
> +       /* VFP */
> +       CHIPONE_DSI(icn, 0x27, mode->vsync_start - mode->vdisplay);
> +
> +       /* VSYNC */
> +       CHIPONE_DSI(icn, 0x28, mode->vsync_end - mode->vsync_start);
> +
> +       /* VBP */
> +       CHIPONE_DSI(icn, 0x29, mode->vtotal - mode->vsync_end);
> +
> +       /* dsi specific sequence */
> +       CHIPONE_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80);
> +       CHIPONE_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28);
> +       CHIPONE_DSI(icn, 0xB5, 0xA0);
> +       CHIPONE_DSI(icn, 0x5C, 0xFF);
> +       CHIPONE_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01);
> +       CHIPONE_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92);
> +       CHIPONE_DSI(icn, 0x6B, 0x71);
> +       CHIPONE_DSI(icn, 0x69, 0x2B);
> +       CHIPONE_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40);
> +       CHIPONE_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98);
> +
> +       /* icn6211 specific sequence */
> +       CHIPONE_DSI(icn, 0xB6, 0x20);
> +       CHIPONE_DSI(icn, 0x51, 0x20);
> +       CHIPONE_DSI(icn, 0x09, 0x10);
> +
> +       msleep(120);
> +}
> +
> +static void chipone_pre_enable(struct drm_bridge *bridge)
> +{
> +       struct chipone *icn = bridge_to_chipone(bridge);
> +
> +       gpiod_set_value(icn->reset_gpio, 1);
> +       msleep(20);
> +
> +       gpiod_set_value(icn->reset_gpio, 0);
> +       msleep(20);
> +
> +       gpiod_set_value(icn->reset_gpio, 1);
> +       msleep(50);
> +}
> +
> +static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
> +{
> +       struct chipone *icn = bridge_to_chipone(bridge);
> +
> +       return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags);
> +}
> +
> +static const struct drm_bridge_funcs chipone_bridge_funcs = {
> +       .post_disable = chipone_post_disable,
> +       .enable = chipone_enable,
> +       .pre_enable = chipone_pre_enable,
> +       .attach = chipone_attach,
> +};
> +
> +static int chipone_probe(struct mipi_dsi_device *dsi)
> +{
> +       struct device *dev = &dsi->dev;
> +       struct drm_panel *panel;
> +       struct chipone *icn;
> +       int ret;
> +
> +       icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL);
> +       if (!icn)
> +               return -ENOMEM;
> +
> +       mipi_dsi_set_drvdata(dsi, icn);
> +       icn->dev = dev;
> +
> +       dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> +       dsi->format = MIPI_DSI_FMT_RGB888;
> +       dsi->lanes = 4;
> +
> +       icn->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> +       if (IS_ERR(icn->reset_gpio)) {
> +               DRM_DEV_ERROR(dev, "failed to get reset GPIO\n");
> +               return PTR_ERR(icn->reset_gpio);
> +       }
> +
> +       ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
> +       if (ret)
> +               return ret;
> +
> +       icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> +       if (IS_ERR(icn->panel_bridge))
> +               return PTR_ERR(icn->panel_bridge);
> +
> +       icn->bridge.funcs = &chipone_bridge_funcs;
> +       icn->bridge.type = DRM_MODE_CONNECTOR_DPI;
> +       icn->bridge.of_node = dev->of_node;
> +
> +       drm_bridge_add(&icn->bridge);
> +
> +       ret = mipi_dsi_attach(dsi);
> +       if (ret < 0) {
> +               drm_bridge_remove(&icn->bridge);
> +               dev_err(dev, "failed to attach dsi\n");
> +       }
> +
> +       return ret;
> +}
> +
> +static int chipone_remove(struct mipi_dsi_device *dsi)
> +{
> +       struct chipone *icn = mipi_dsi_get_drvdata(dsi);
> +
> +       mipi_dsi_detach(dsi);
> +       drm_bridge_remove(&icn->bridge);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id chipone_of_match[] = {
> +       { .compatible = "chipone,icn6211", },
> +       { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, chipone_of_match);
> +
> +static struct mipi_dsi_driver chipone_driver = {
> +       .probe = chipone_probe,
> +       .remove = chipone_remove,
> +       .driver = {
> +               .name = "chipone-icn6211",
> +               .owner = THIS_MODULE,
> +               .of_match_table = chipone_of_match,
> +       },
> +};
> +module_mipi_dsi_driver(chipone_driver);
> +
> +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
> +MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Convertor Bridge");

WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#298: FILE: drivers/gpu/drm/bridge/chipone-icn6211.c:221:
+MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Convertor Bridge");
                                                     ^^^^^^^^^


> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Robert Foss]

Hey Jagan,

Thanks for submitting this.

checkpatch.pl threw some typ-o warnings, and I listed them below. I
think either spelling is correct, but 'spelling.txt' does list this as
a typ-o explicitly, so I would suggest conforming to that just to
silence the checkpatch warning.

This patch also passes 'dt_binding_check' and 'dtbs_check', but I
think I'd like to defer to Rob Herring for an actual r-b.

On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
>
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
>
> Add dt-bingings for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated to new dt-bindings style
>
>  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> new file mode 100644
> index 000000000000..13764f13fe46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge

$ scripts/checkpatch.pl --git HEAD~0
WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#7:
ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
                           ^^^^^^^^^

> +
> +maintainers:
> +  - Jagan Teki <jagan@amarulasolutions.com>
> +
> +description: |
> +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.

WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#38: FILE: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml:13:
+  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
                              ^^^^^^^^^


> +
> +  It has a flexible configuration of MIPI DSI signal input and
> +  produce RGB565, RGB666, RGB888 output format.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - chipone,icn6211
> +
> +  reg:
> +    maxItems: 1
> +    description: virtual channel number of a DSI peripheral
> +
> +  reset-gpios:
> +    description: GPIO connected for the reset pin
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DSI input
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DPI output (panel or connector).
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge@0 {
> +        compatible = "chipone,icn6211";
> +        reg = <0>;
> +        reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          bridge_in: port@0 {
> +            reg = <0>;
> +
> +            bridge_out_dsi: endpoint {
> +              remote-endpoint = <&dsi_out_bridge>;
> +            };
> +          };
> +
> +          bridge_out: port@1 {
> +            reg = <1>;
> +
> +            bridge_out_panel: endpoint {
> +              remote-endpoint = <&panel_out_bridge>;
> +            };
> +          };
> +        };
> +      };
> +    };
> --
> 2.25.1
>

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Jagan Teki]

On Mon, Feb 15, 2021 at 5:28 PM Robert Foss <robert.foss@linaro.org> wrote:
>
> Hey Jagan,
>
> Thanks for submitting this.
>
> checkpatch.pl threw some typ-o warnings, and I listed them below. I
> think either spelling is correct, but 'spelling.txt' does list this as
> a typ-o explicitly, so I would suggest conforming to that just to
> silence the checkpatch warning.
>
> This patch also passes 'dt_binding_check' and 'dtbs_check', but I
> think I'd like to defer to Rob Herring for an actual r-b.
>
> On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> >
> > It has a flexible configuration of MIPI DSI signal input and
> > produce RGB565, RGB666, RGB888 output format.
> >
> > Add dt-bingings for it.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v3:
> > - updated to new dt-bindings style
> >
> >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> >  1 file changed, 90 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > new file mode 100644
> > index 000000000000..13764f13fe46
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > @@ -0,0 +1,90 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
>
> $ scripts/checkpatch.pl --git HEAD~0
> WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?

Thanks for pointing it.

I was aware of it before sending it and need to understand whether we
need to use vendor naming conversion or not. Chipone call these
devices are Convertor [1], So I have used the vendor notation for
better understanding.

Any comments are this would be welcome?

[1] http://en.chiponeic.com/content/details45_123.html

Jagan.

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Rob Herring]

On Mon, Feb 15, 2021 at 05:38:16PM +0530, Jagan Teki wrote:
> On Mon, Feb 15, 2021 at 5:28 PM Robert Foss <robert.foss@linaro.org> wrote:
> >
> > Hey Jagan,
> >
> > Thanks for submitting this.
> >
> > checkpatch.pl threw some typ-o warnings, and I listed them below. I
> > think either spelling is correct, but 'spelling.txt' does list this as
> > a typ-o explicitly, so I would suggest conforming to that just to
> > silence the checkpatch warning.
> >
> > This patch also passes 'dt_binding_check' and 'dtbs_check', but I
> > think I'd like to defer to Rob Herring for an actual r-b.
> >
> > On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
> > >
> > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > >
> > > It has a flexible configuration of MIPI DSI signal input and
> > > produce RGB565, RGB666, RGB888 output format.
> > >
> > > Add dt-bingings for it.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > > Changes for v3:
> > > - updated to new dt-bindings style
> > >
> > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > >  1 file changed, 90 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > new file mode 100644
> > > index 000000000000..13764f13fe46
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > @@ -0,0 +1,90 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> >
> > $ scripts/checkpatch.pl --git HEAD~0
> > WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
> 
> Thanks for pointing it.
> 
> I was aware of it before sending it and need to understand whether we
> need to use vendor naming conversion or not. Chipone call these
> devices are Convertor [1], So I have used the vendor notation for
> better understanding.
> 
> Any comments are this would be welcome?

Fix their spelling. If you need to propagate spelling/grammar errors, 
there's a defined way to do so.

Rob

> 
> [1] http://en.chiponeic.com/content/details45_123.html
> 
> Jagan.

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Laurent Pinchart]

Hi Jagan,

Thank you for the patch.

On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> 
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
> 
> Add dt-bingings for it.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated to new dt-bindings style
> 
>  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> new file mode 100644
> index 000000000000..13764f13fe46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> +
> +maintainers:
> +  - Jagan Teki <jagan@amarulasolutions.com>
> +
> +description: |
> +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> +
> +  It has a flexible configuration of MIPI DSI signal input and
> +  produce RGB565, RGB666, RGB888 output format.

How does one select between the output formats ? Should the output
connection option be described in the device tree ?

> +
> +properties:
> +  compatible:
> +    enum:
> +      - chipone,icn6211
> +
> +  reg:
> +    maxItems: 1
> +    description: virtual channel number of a DSI peripheral
> +
> +  reset-gpios:
> +    description: GPIO connected for the reset pin
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DSI input
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DPI output (panel or connector).
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - ports

How about regulators ?

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge@0 {
> +        compatible = "chipone,icn6211";
> +        reg = <0>;
> +        reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          bridge_in: port@0 {

You can drop this label.

> +            reg = <0>;
> +
> +            bridge_out_dsi: endpoint {

This label should be bridge_in_dsi.

> +              remote-endpoint = <&dsi_out_bridge>;
> +            };
> +          };
> +
> +          bridge_out: port@1 {

You can drop this label too.

> +            reg = <1>;
> +
> +            bridge_out_panel: endpoint {
> +              remote-endpoint = <&panel_out_bridge>;
> +            };
> +          };
> +        };
> +      };
> +    };

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Jagan Teki]

Hi Laurent,

On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> Thank you for the patch.
>
> On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> >
> > It has a flexible configuration of MIPI DSI signal input and
> > produce RGB565, RGB666, RGB888 output format.
> >
> > Add dt-bingings for it.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v3:
> > - updated to new dt-bindings style
> >
> >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> >  1 file changed, 90 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > new file mode 100644
> > index 000000000000..13764f13fe46
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > @@ -0,0 +1,90 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > +
> > +maintainers:
> > +  - Jagan Teki <jagan@amarulasolutions.com>
> > +
> > +description: |
> > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > +
> > +  It has a flexible configuration of MIPI DSI signal input and
> > +  produce RGB565, RGB666, RGB888 output format.
>
> How does one select between the output formats ? Should the output
> connection option be described in the device tree ?

I think that is a good option to select output formats via dts. what
if it makes it a generic property like data-lanes? since it is common
across many other bridges.

>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - chipone,icn6211
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: virtual channel number of a DSI peripheral
> > +
> > +  reset-gpios:
> > +    description: GPIO connected for the reset pin
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Video port for MIPI DSI input
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Video port for MIPI DPI output (panel or connector).
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reset-gpios
> > +  - ports
>
> How about regulators ?

Will add it in the next version.

Jagan.

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Laurent Pinchart]

Hi Jagan,

On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > >
> > > It has a flexible configuration of MIPI DSI signal input and
> > > produce RGB565, RGB666, RGB888 output format.
> > >
> > > Add dt-bingings for it.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > > Changes for v3:
> > > - updated to new dt-bindings style
> > >
> > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > >  1 file changed, 90 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > new file mode 100644
> > > index 000000000000..13764f13fe46
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > @@ -0,0 +1,90 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > +
> > > +maintainers:
> > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > +
> > > +description: |
> > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > +
> > > +  It has a flexible configuration of MIPI DSI signal input and
> > > +  produce RGB565, RGB666, RGB888 output format.
> >
> > How does one select between the output formats ? Should the output
> > connection option be described in the device tree ?
> 
> I think that is a good option to select output formats via dts. what
> if it makes it a generic property like data-lanes? since it is common
> across many other bridges.

Describing the output connection in the device tree sounds like a good
idea indeed. The bus-width property could be used for this, maybe along
the lines of
https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.

If, for a given wiring of the output, different formats could be used,
then we would need to select them at runtime.

> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - chipone,icn6211
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +    description: virtual channel number of a DSI peripheral
> > > +
> > > +  reset-gpios:
> > > +    description: GPIO connected for the reset pin
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description:
> > > +          Video port for MIPI DSI input
> > > +
> > > +      port@1:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description:
> > > +          Video port for MIPI DPI output (panel or connector).
> > > +
> > > +    required:
> > > +      - port@0
> > > +      - port@1
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - reset-gpios
> > > +  - ports
> >
> > How about regulators ?
> 
> Will add it in the next version.

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Jagan Teki]

Hi Laurent,

On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > >
> > > > It has a flexible configuration of MIPI DSI signal input and
> > > > produce RGB565, RGB666, RGB888 output format.
> > > >
> > > > Add dt-bingings for it.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > ---
> > > > Changes for v3:
> > > > - updated to new dt-bindings style
> > > >
> > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > >  1 file changed, 90 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > new file mode 100644
> > > > index 000000000000..13764f13fe46
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > @@ -0,0 +1,90 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > +
> > > > +maintainers:
> > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > +
> > > > +description: |
> > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > +
> > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > +  produce RGB565, RGB666, RGB888 output format.
> > >
> > > How does one select between the output formats ? Should the output
> > > connection option be described in the device tree ?
> >
> > I think that is a good option to select output formats via dts. what
> > if it makes it a generic property like data-lanes? since it is common
> > across many other bridges.
>
> Describing the output connection in the device tree sounds like a good
> idea indeed. The bus-width property could be used for this, maybe along
> the lines of
> https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.

I think this bridge is doing, what we discussed? am I correct?
Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml

>
> If, for a given wiring of the output, different formats could be used,
> then we would need to select them at runtime.

That means the opposite of what mipi_dsi_pixel_format_to_bpp is doing
right? like given bpp we need to select format.

Jagan.

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Jagan Teki]

On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > >
> > > > It has a flexible configuration of MIPI DSI signal input and
> > > > produce RGB565, RGB666, RGB888 output format.
> > > >
> > > > Add dt-bingings for it.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > ---
> > > > Changes for v3:
> > > > - updated to new dt-bindings style
> > > >
> > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > >  1 file changed, 90 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > new file mode 100644
> > > > index 000000000000..13764f13fe46
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > @@ -0,0 +1,90 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > +
> > > > +maintainers:
> > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > +
> > > > +description: |
> > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > +
> > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > +  produce RGB565, RGB666, RGB888 output format.
> > >
> > > How does one select between the output formats ? Should the output
> > > connection option be described in the device tree ?
> >
> > I think that is a good option to select output formats via dts. what
> > if it makes it a generic property like data-lanes? since it is common
> > across many other bridges.
>
> Describing the output connection in the device tree sounds like a good
> idea indeed. The bus-width property could be used for this, maybe along
> the lines of
> https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.

I have seen an issue by passing bus-width where the same bus-with 24
can use by RGB888 and RGB666 according to
mipi_dsi_pixel_format_to_bpp. Having a default RGB888 format now and
update it when it supports properly, can be a good Idea I thought of.
Let me know if you have any comments?

Jagan.

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Laurent Pinchart]

Hi Jagan,

On Wed, Mar 03, 2021 at 08:08:35PM +0530, Jagan Teki wrote:
> On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart wrote:
> > On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > > >
> > > > > It has a flexible configuration of MIPI DSI signal input and
> > > > > produce RGB565, RGB666, RGB888 output format.
> > > > >
> > > > > Add dt-bingings for it.
> > > > >
> > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > > ---
> > > > > Changes for v3:
> > > > > - updated to new dt-bindings style
> > > > >
> > > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > > >  1 file changed, 90 insertions(+)
> > > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > new file mode 100644
> > > > > index 000000000000..13764f13fe46
> > > > > --- /dev/null
> > > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > @@ -0,0 +1,90 @@
> > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > +%YAML 1.2
> > > > > +---
> > > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > +
> > > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > > +
> > > > > +maintainers:
> > > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > > +
> > > > > +description: |
> > > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > > +
> > > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > > +  produce RGB565, RGB666, RGB888 output format.
> > > >
> > > > How does one select between the output formats ? Should the output
> > > > connection option be described in the device tree ?
> > >
> > > I think that is a good option to select output formats via dts. what
> > > if it makes it a generic property like data-lanes? since it is common
> > > across many other bridges.
> >
> > Describing the output connection in the device tree sounds like a good
> > idea indeed. The bus-width property could be used for this, maybe along
> > the lines of
> > https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.
> 
> I have seen an issue by passing bus-width where the same bus-with 24
> can use by RGB888 and RGB666 according to
> mipi_dsi_pixel_format_to_bpp. Having a default RGB888 format now and
> update it when it supports properly, can be a good Idea I thought of.
> Let me know if you have any comments?

I'm fine with hardcoding a default for now. If a given bus wiring (which
is described in DT by bus-width) can transport different formats, that's
something that should be configured dynamically, either by querying what
format a sink (such as a panel) requires, or if both the source and the
sink can support different formats, possibly by involving userspace in
the selection.

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Jagan Teki]

Hi Laurent,

On Thu, Mar 4, 2021 at 4:29 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Wed, Mar 03, 2021 at 08:08:35PM +0530, Jagan Teki wrote:
> > On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart wrote:
> > > On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > > > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > > > >
> > > > > > It has a flexible configuration of MIPI DSI signal input and
> > > > > > produce RGB565, RGB666, RGB888 output format.
> > > > > >
> > > > > > Add dt-bingings for it.
> > > > > >
> > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > > > ---
> > > > > > Changes for v3:
> > > > > > - updated to new dt-bindings style
> > > > > >
> > > > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > > > >  1 file changed, 90 insertions(+)
> > > > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > >
> > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > > new file mode 100644
> > > > > > index 000000000000..13764f13fe46
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > > @@ -0,0 +1,90 @@
> > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > > +%YAML 1.2
> > > > > > +---
> > > > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > > +
> > > > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > > > +
> > > > > > +maintainers:
> > > > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > > > +
> > > > > > +description: |
> > > > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > > > +
> > > > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > > > +  produce RGB565, RGB666, RGB888 output format.
> > > > >
> > > > > How does one select between the output formats ? Should the output
> > > > > connection option be described in the device tree ?
> > > >
> > > > I think that is a good option to select output formats via dts. what
> > > > if it makes it a generic property like data-lanes? since it is common
> > > > across many other bridges.
> > >
> > > Describing the output connection in the device tree sounds like a good
> > > idea indeed. The bus-width property could be used for this, maybe along
> > > the lines of
> > > https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.
> >
> > I have seen an issue by passing bus-width where the same bus-with 24
> > can use by RGB888 and RGB666 according to
> > mipi_dsi_pixel_format_to_bpp. Having a default RGB888 format now and
> > update it when it supports properly, can be a good Idea I thought of.
> > Let me know if you have any comments?
>
> I'm fine with hardcoding a default for now. If a given bus wiring (which
> is described in DT by bus-width) can transport different formats, that's
> something that should be configured dynamically, either by querying what
> format a sink (such as a panel) requires, or if both the source and the
> sink can support different formats, possibly by involving userspace in
> the selection.

Not sure how we can get userspace involvement in DRM here, but if
source and sink can have different formats then having precedence to
the source would be a good option as it handles low-level
configuration for formats.

Look like it is worth trying-feature. Maybe we can come up with some
RFC and have a discussion.

Jagan.

Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Rob Herring]

On Sun, 14 Feb 2021 23:22:10 +0530, Jagan Teki wrote:
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> 
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
> 
> Add dt-bingings for it.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated to new dt-bindings style
> 
>  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>