From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: Re: [PATCH 2/2] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Date: Fri, 6 Oct 2017 09:57:11 +0200 Message-ID: References: <1507108713-10686-1-git-send-email-fabrizio.castro@bp.renesas.com> <1507108713-10686-3-git-send-email-fabrizio.castro@bp.renesas.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <1507108713-10686-3-git-send-email-fabrizio.castro@bp.renesas.com> Sender: linux-renesas-soc-owner@vger.kernel.org To: Fabrizio Castro Cc: Rob Herring , Mark Rutland , Russell King , Simon Horman , Magnus Damm , "devicetree@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , Linux-Renesas , Chris Paterson , Biju Das List-Id: devicetree@vger.kernel.org Hi Fabrizio, On Wed, Oct 4, 2017 at 11:18 AM, Fabrizio Castro wrote: > This patch adds a .dtsi that describes the camera daughter board > and a .dts to describe the HW made of iWave's RZ/G1M SoM, iWave's > RZ/G1M/G1N Qseven carrier board, and the camera daughter board. > The camera daughter board .dtsi adds support for ttySC[14]. > > Signed-off-by: Fabrizio Castro > Signed-off-by: Chris Paterson Reviewed-by: Geert Uytterhoeven > --- /dev/null > +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi > +/ { > + aliases { > + serial1 = &scif1; > + serial4 = &hscif1; BTW, what's the reason you picked serial4 for the third serial port? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds