devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] [RFC] of: unittest: overlay_pci_node: Fix overlay style
@ 2023-08-23 12:52 Geert Uytterhoeven
  2023-08-23 16:43 ` Rob Herring
  0 siblings, 1 reply; 3+ messages in thread
From: Geert Uytterhoeven @ 2023-08-23 12:52 UTC (permalink / raw)
  To: Rob Herring, Frank Rowand, Lizhi Hou
  Cc: Herve Codina, devicetree, Geert Uytterhoeven

Miscellaneous fixes and improvements to the overlay_pci_node:
  - Add missing /plugin/,
  - Convert to sugar syntax,
  - Add missing blank lines between properties and subnodes.

As sugar syntax does not support empty target paths, the test device is
added to /testcase-data/overlay-node instead.

Fixes: 26409dd045892904 ("of: unittest: Add pci_dt_testdrv pci driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
RFC, as I don't have a QEMU setup to run the test.
---
 .../of/unittest-data/overlay_pci_node.dtso    | 33 +++++++++----------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/of/unittest-data/overlay_pci_node.dtso b/drivers/of/unittest-data/overlay_pci_node.dtso
index c05e52e9e44a9583..f18c9795e6efa5f3 100644
--- a/drivers/of/unittest-data/overlay_pci_node.dtso
+++ b/drivers/of/unittest-data/overlay_pci_node.dtso
@@ -1,22 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
-/ {
-	fragment@0 {
-		target-path="";
-		__overlay__ {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			pci-ep-bus@0 {
-				compatible = "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x0 0x0 0x0 0x1000>;
-				reg = <0 0 0 0 0>;
-				unittest-pci@100 {
-					compatible = "unittest-pci";
-					reg = <0x100 0x200>;
-				};
-			};
+/plugin/;
+
+&{/testcase-data/overlay-node} {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	pci-ep-bus@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x0 0x1000>;
+		reg = <0 0 0 0 0>;
+
+		unittest-pci@100 {
+			compatible = "unittest-pci";
+			reg = <0x100 0x200>;
 		};
 	};
 };
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH] [RFC] of: unittest: overlay_pci_node: Fix overlay style
  2023-08-23 12:52 [PATCH] [RFC] of: unittest: overlay_pci_node: Fix overlay style Geert Uytterhoeven
@ 2023-08-23 16:43 ` Rob Herring
  2023-08-24  7:59   ` Geert Uytterhoeven
  0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2023-08-23 16:43 UTC (permalink / raw)
  To: Geert Uytterhoeven; +Cc: Frank Rowand, Lizhi Hou, Herve Codina, devicetree

On Wed, Aug 23, 2023 at 7:52 AM Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
>
> Miscellaneous fixes and improvements to the overlay_pci_node:
>   - Add missing /plugin/,

Is it really missing if it wasn't needed since no unresolved phandles?
I guess the sugar syntax needs, too?

>   - Convert to sugar syntax,
>   - Add missing blank lines between properties and subnodes.
>
> As sugar syntax does not support empty target paths, the test device is
> added to /testcase-data/overlay-node instead.

There's a definite need for unspecified target paths. It's probably
something of an oversight that a blank path was even allowed. I don't
think putting in the wrong path is a good solution. There should be
perhaps more discussion if a blank path is the right thing and then
how to make the sugar syntax output a blank path.

Rob

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] [RFC] of: unittest: overlay_pci_node: Fix overlay style
  2023-08-23 16:43 ` Rob Herring
@ 2023-08-24  7:59   ` Geert Uytterhoeven
  0 siblings, 0 replies; 3+ messages in thread
From: Geert Uytterhoeven @ 2023-08-24  7:59 UTC (permalink / raw)
  To: Rob Herring; +Cc: Frank Rowand, Lizhi Hou, Herve Codina, devicetree

Hi Rob,

On Wed, Aug 23, 2023 at 6:44 PM Rob Herring <robh+dt@kernel.org> wrote:
> On Wed, Aug 23, 2023 at 7:52 AM Geert Uytterhoeven
> <geert+renesas@glider.be> wrote:
> >
> > Miscellaneous fixes and improvements to the overlay_pci_node:
> >   - Add missing /plugin/,
>
> Is it really missing if it wasn't needed since no unresolved phandles?
> I guess the sugar syntax needs, too?

It's indeed needed for the &{...} reference using sugar syntax.

> >   - Convert to sugar syntax,
> >   - Add missing blank lines between properties and subnodes.
> >
> > As sugar syntax does not support empty target paths, the test device is
> > added to /testcase-data/overlay-node instead.
>
> There's a definite need for unspecified target paths. It's probably
> something of an oversight that a blank path was even allowed. I don't
> think putting in the wrong path is a good solution. There should be
> perhaps more discussion if a blank path is the right thing and then
> how to make the sugar syntax output a blank path.

The path will not be used anyway, as it will be overwritten by passing
the new base parameter of of_overlay_fdt_apply().
So "/" could be used as well.
I have more comments, but I'll give them as a reply to the original
patch introducing the base parameter.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2023-08-24  8:01 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-08-23 12:52 [PATCH] [RFC] of: unittest: overlay_pci_node: Fix overlay style Geert Uytterhoeven
2023-08-23 16:43 ` Rob Herring
2023-08-24  7:59   ` Geert Uytterhoeven

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).