[PATCH 0/2] Add V3H Starter Kit board support

[PATCH 0/2] Add V3H Starter Kit board support

[Sergei Shtylyov]

Hello!

Here's the set of 2 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-20180509-v4.17-rc4' tag. I'm adding the device tree support
for the R8A77980-based V3H Starter Kit board; only serial console is supported
for now, NFS support will require more work (it won't use EtherAVB but GEther)
and will be posted later...

[1/2] dt-bindings: arm: document Renesas V3HSK board bindings
[2/2] arm64: dts: renesas: initial V3HSK board device tree

WBR, Sergei

[PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings

[Sergei Shtylyov]

Document the V3H Starter Kit device tree bindings, listing it as
a supported board.

This allows to use checkpatch.pl to validate .dts files referring to
the V3HSK board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 Documentation/devicetree/bindings/arm/shmobile.txt |    2 ++
 1 file changed, 2 insertions(+)

Index: renesas/Documentation/devicetree/bindings/arm/shmobile.txt
===================================================================
--- renesas.orig/Documentation/devicetree/bindings/arm/shmobile.txt
+++ renesas/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -132,6 +132,8 @@ Boards:
     compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
   - Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
     compatible = "renesas,stout", "renesas,r8a7790"
+  - V3HSK (Y-ASK-RCAR-V3H-WS10)
+    compatible = "renesas,v3hsk", "renesas,r8a77980"
   - V3MSK (Y-ASK-RCAR-V3M-WS10)
     compatible = "renesas,v3msk", "renesas,r8a77970"
   - Wheat (RTP0RC7792ASKB0000JE)

Re: [PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings

[Simon Horman]

On Thu, May 10, 2018 at 09:09:40PM +0300, Sergei Shtylyov wrote:
> Document the V3H Starter Kit device tree bindings, listing it as
> a supported board.
> 
> This allows to use checkpatch.pl to validate .dts files referring to
> the V3HSK board.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

This looks fine but I will wait to see if there are other reviews before
applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> 
> ---
>  Documentation/devicetree/bindings/arm/shmobile.txt |    2 ++
>  1 file changed, 2 insertions(+)
> 
> Index: renesas/Documentation/devicetree/bindings/arm/shmobile.txt
> ===================================================================
> --- renesas.orig/Documentation/devicetree/bindings/arm/shmobile.txt
> +++ renesas/Documentation/devicetree/bindings/arm/shmobile.txt
> @@ -132,6 +132,8 @@ Boards:
>      compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
>    - Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
>      compatible = "renesas,stout", "renesas,r8a7790"
> +  - V3HSK (Y-ASK-RCAR-V3H-WS10)
> +    compatible = "renesas,v3hsk", "renesas,r8a77980"
>    - V3MSK (Y-ASK-RCAR-V3M-WS10)
>      compatible = "renesas,v3msk", "renesas,r8a77970"
>    - Wheat (RTP0RC7792ASKB0000JE)
> 

Re: [PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings

[Geert Uytterhoeven]

On Thu, May 10, 2018 at 8:09 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Document the V3H Starter Kit device tree bindings, listing it as
> a supported board.
>
> This allows to use checkpatch.pl to validate .dts files referring to
> the V3HSK board.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings

[Simon Horman]

On Mon, May 14, 2018 at 10:28:34PM +0200, Geert Uytterhoeven wrote:
> On Thu, May 10, 2018 at 8:09 PM, Sergei Shtylyov
> <sergei.shtylyov@cogentembedded.com> wrote:
> > Document the V3H Starter Kit device tree bindings, listing it as
> > a supported board.
> >
> > This allows to use checkpatch.pl to validate .dts files referring to
> > the V3HSK board.
> >
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied.

[PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree

[Sergei Shtylyov]

Add the initial device  tree for  the V3H Starter Kit board.
The board has 1 debug serial port (SCIF0); include support for it,
so that the serial console can work.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/Makefile           |    2 
 arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts |   60 +++++++++++++++++++++++++
 2 files changed, 61 insertions(+), 1 deletion(-)

Index: renesas/arch/arm64/boot/dts/renesas/Makefile
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/Makefile
+++ renesas/arch/arm64/boot/dts/renesas/Makefile
@@ -9,6 +9,6 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3
 dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
-dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
 dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
 dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
===================================================================
--- /dev/null
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the V3H Starter Kit board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+
+/ {
+	model = "Renesas V3H Starter Kit board";
+	compatible = "renesas,v3hsk", "renesas,r8a77980";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};

Re: [PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree

[Simon Horman]

On Thu, May 10, 2018 at 09:12:30PM +0300, Sergei Shtylyov wrote:
> Add the initial device  tree for  the V3H Starter Kit board.
> The board has 1 debug serial port (SCIF0); include support for it,
> so that the serial console can work.
> 
> Based on the original (and large) patch by Vladimir Barinov.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

This looks fine but I will wait to see if there are other reviews before
applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree

[Simon Horman]

On Sun, May 13, 2018 at 10:07:04AM +0200, Simon Horman wrote:
> On Thu, May 10, 2018 at 09:12:30PM +0300, Sergei Shtylyov wrote:
> > Add the initial device  tree for  the V3H Starter Kit board.
> > The board has 1 debug serial port (SCIF0); include support for it,
> > so that the serial console can work.
> > 
> > Based on the original (and large) patch by Vladimir Barinov.
> > 
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> This looks fine but I will wait to see if there are other reviews before
> applying.
> 
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Applied

Re: [PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree

[Geert Uytterhoeven]

On Thu, May 10, 2018 at 8:12 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add the initial device  tree for  the V3H Starter Kit board.
> The board has 1 debug serial port (SCIF0); include support for it,
> so that the serial console can work.
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

FTR:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> --- /dev/null
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts

> +&pfc {
> +       scif0_pins: scif0 {
> +               groups = "scif0_data";
> +               function = "scif0";
> +       };

JFYI, hscif0 can be routed to the same pins, if higher performance is needed.


Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds