From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Simon Horman <horms@verge.net.au>,
linux-renesas-soc@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
Russell King <linux@arm.linux.org.uk>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 3/6] ARM: dts: r8a7794: add MSTP10 clocks
Date: Thu, 19 May 2016 18:44:19 +0200 [thread overview]
Message-ID: <CAMuHMdVjrVFpEZPukWiLQK473R+7CTqVHc1jj8fktAD9RpH_sw@mail.gmail.com> (raw)
In-Reply-To: <3321354.LNTkVAhXvF@wasted.cogentembedded.com>
On Thu, May 12, 2016 at 10:46 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add MSTP10 clocks to the R8A7794 device tree.
>
> This patch is based on the commit ee9141522dcf ("ARM: shmobile: r8a7791:
> add MSTP10 support on DTSI").
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> Changes in version 3:
> - refreshed the patch.
>
> Changes in version 2:
> - fixed the SoC model in the change log;
> - added "the" article to the change log.
>
> arch/arm/boot/dts/r8a7794.dtsi | 53 ++++++++++++++++++++++++++++++
> include/dt-bindings/clock/r8a7794-clock.h | 28 +++++++++++++++
> 2 files changed, 81 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
> +++ renesas/arch/arm/boot/dts/r8a7794.dtsi
> @@ -1235,6 +1235,59 @@
> "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
> "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
> };
> + mstp10_clks: mstp10_clks@e6150998 {
> + compatible = "renesas,r8a7794-mstp-clocks",
> + "renesas,cpg-mstp-clocks";
> + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
> + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
> + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
> + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>,
> + <&mstp10_clks R8A7794_CLK_SCU_ALL>;
> + #clock-cells = <1>;
> + clock-indices = <R8A7794_CLK_SSI_ALL
> + R8A7794_CLK_SSI9 R8A7794_CLK_SSI8
> + R8A7794_CLK_SSI7 R8A7794_CLK_SSI6
> + R8A7794_CLK_SSI5 R8A7794_CLK_SSI4
> + R8A7794_CLK_SSI3 R8A7794_CLK_SSI2
> + R8A7794_CLK_SSI1 R8A7794_CLK_SSI0
> + R8A7794_CLK_SCU_ALL
> + R8A7794_CLK_SCU_DVC1
> + R8A7794_CLK_SCU_DVC0
> + R8A7794_CLK_SCU_CTU1_MIX1
> + R8A7794_CLK_SCU_CTU0_MIX0
> + R8A7794_CLK_SCU_SRC9
> + R8A7794_CLK_SCU_SRC8
> + R8A7794_CLK_SCU_SRC7
> + R8A7794_CLK_SCU_SRC6
> + R8A7794_CLK_SCU_SRC5
> + R8A7794_CLK_SCU_SRC4
> + R8A7794_CLK_SCU_SRC3
> + R8A7794_CLK_SCU_SRC2
> + R8A7794_CLK_SCU_SRC1
> + R8A7794_CLK_SCU_SRC0>;
> + clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7",
> + "ssi6", "ssi5", "ssi4", "ssi3",
> + "ssi2", "ssi1", "ssi0",
> + "scu-all", "scu-dvc1", "scu-dvc0",
> + "scu-ctu1-mix1", "scu-ctu0-mix0",
> + "scu-src9", "scu-src8", "scu-src7",
> + "scu-src6", "scu-src5", "scu-src4",
> + "scu-src3", "scu-src2", "scu-src1",
> + "scu-src0";
> + };
> mstp11_clks: mstp11_clks@e615099c {
> compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
> reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
> Index: renesas/include/dt-bindings/clock/r8a7794-clock.h
> ===================================================================
> --- renesas.orig/include/dt-bindings/clock/r8a7794-clock.h
> +++ renesas/include/dt-bindings/clock/r8a7794-clock.h
> @@ -109,6 +109,34 @@
> #define R8A7794_CLK_I2C1 30
> #define R8A7794_CLK_I2C0 31
>
> +/* MSTP10 */
> +#define R8A7794_CLK_SSI_ALL 5
> +#define R8A7794_CLK_SSI9 6
> +#define R8A7794_CLK_SSI8 7
> +#define R8A7794_CLK_SSI7 8
> +#define R8A7794_CLK_SSI6 9
> +#define R8A7794_CLK_SSI5 10
> +#define R8A7794_CLK_SSI4 11
> +#define R8A7794_CLK_SSI3 12
> +#define R8A7794_CLK_SSI2 13
> +#define R8A7794_CLK_SSI1 14
> +#define R8A7794_CLK_SSI0 15
> +#define R8A7794_CLK_SCU_ALL 17
> +#define R8A7794_CLK_SCU_DVC1 18
> +#define R8A7794_CLK_SCU_DVC0 19
> +#define R8A7794_CLK_SCU_CTU1_MIX1 20
> +#define R8A7794_CLK_SCU_CTU0_MIX0 21
> +#define R8A7794_CLK_SCU_SRC9 22
> +#define R8A7794_CLK_SCU_SRC8 23
> +#define R8A7794_CLK_SCU_SRC7 24
R-Car E2 does not have SRC7, SRC8, SRC9, ...
> +#define R8A7794_CLK_SCU_SRC6 25
> +#define R8A7794_CLK_SCU_SRC5 26
> +#define R8A7794_CLK_SCU_SRC4 27
> +#define R8A7794_CLK_SCU_SRC3 28
> +#define R8A7794_CLK_SCU_SRC2 29
> +#define R8A7794_CLK_SCU_SRC1 30
> +#define R8A7794_CLK_SCU_SRC0 31
... and SRC0.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2016-05-19 16:44 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 20:38 [PATCH v3 0/6] Add R8A7794/SILK sound DT support Sergei Shtylyov
2016-05-12 20:40 ` [PATCH v3 1/6] ARM: dts: r8a7794: add audio clocks Sergei Shtylyov
2016-05-12 20:45 ` [PATCH v3 2/6] ARM: dts: r8a7794: add MSTP5 clocks Sergei Shtylyov
[not found] ` <1576909.nm8MtQ2Ln5-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org>
2016-05-19 16:25 ` Geert Uytterhoeven
2016-05-19 17:30 ` Sergei Shtylyov
2016-05-20 4:20 ` Simon Horman
2016-05-12 20:46 ` [PATCH v3 3/6] ARM: dts: r8a7794: add MSTP10 clocks Sergei Shtylyov
2016-05-19 16:44 ` Geert Uytterhoeven [this message]
2016-05-19 17:37 ` Sergei Shtylyov
2016-05-19 17:41 ` Geert Uytterhoeven
2016-05-19 18:36 ` Sergei Shtylyov
2016-05-20 4:22 ` Simon Horman
2016-05-12 20:49 ` [PATCH v3 5/6] ARM: dts: r8a7794: add sound support Sergei Shtylyov
2016-05-13 6:13 ` Geert Uytterhoeven
[not found] ` <2378837.cigT3tNQPe-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org>
2016-05-12 20:47 ` [PATCH v3 4/6] ARM: dts: r8a7794: add Audio-DMAC support Sergei Shtylyov
2016-05-13 6:12 ` Geert Uytterhoeven
2016-05-12 20:51 ` [PATCH v3 6/6] ARM: dts: silk: add sound support Sergei Shtylyov
2016-05-12 21:16 ` [PATCH v3 0/6] Add R8A7794/SILK sound DT support Sergei Shtylyov
2016-06-06 18:11 ` Sergei Shtylyov
[not found] ` <b77ad169-c9d1-4d67-0973-fc9639ddb613-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-06-07 0:37 ` Simon Horman
2016-06-07 10:31 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMuHMdVjrVFpEZPukWiLQK473R+7CTqVHc1jj8fktAD9RpH_sw@mail.gmail.com \
--to=geert@linux-m68k.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=horms@verge.net.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).