[PATCH v6 0/4] Add missing port pins on RZ/Five SoC

[PATCH v6 0/4] Add missing port pins on RZ/Five SoC

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi All,

This patch series intends to incorporate the absent port pins P19 to P28,
which are exclusively available on the RZ/Five SoC.

Cheers,
Prabhakar

v5 -> v6:
- Rebased the changes due to conflict in pinctrl-rzg2l.c

v4 -> v5:
- Made struct rzg2l_variable_pin_cfg variables u32
- Updated PIN_CFG_PIN_MAP_MASK macro to use GENMASK_ULL() as reported
  by kernel test robot.

v3 -> v4:
- Rebased the changes on top Claudiu's patches
- patch 1/4 is new patch for using FIELD_PREP_CONST/FIELD_GET as
  suggested by Geert
- patch 2/4 adjusted the code again using FIELD_PREP_CONST/FIELD_GET
- patch 3/4 fixed rzg2l_pinctrl_get_variable_pin_cfg() as pointed by Geert
- patch 4/4 is unchanged
- patches 1-3 have been boot tested on g2l family

v2->v3:
- Fixed build warnings for m68k as reported by Kernel test robot.

RFC -> v2:
- Fixed review comments pointed by Geert & Biju

RFC:
Link: https://lore.kernel.org/lkml/20230630120433.49529-3-prabhakar.mahadev-lad.rj@bp.renesas.com/T/

Lad Prabhakar (4):
  pinctrl: renesas: rzg2l: Improve code for readability
  pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK()
    macro
  pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
  riscv: dts: renesas: r9a07g043f: Update gpio-ranges property

 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi |   4 +
 drivers/pinctrl/renesas/pinctrl-rzg2l.c     | 284 +++++++++++++++++---
 2 files changed, 248 insertions(+), 40 deletions(-)

-- 
2.34.1

[PATCH v6 1/4] pinctrl: renesas: rzg2l: Improve code for readability

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

As the RZ/G2L pinctrl driver is extensively utilized by numerous SoCs and
has experienced substantial growth, enhance code readability by
incorporating FIELD_PREP_CONST/FIELD_GET macros wherever necessary.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 41 +++++++++++++++----------
 1 file changed, 24 insertions(+), 17 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 80fb5011c7bb..c7dc32176bfe 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2021 Renesas Electronics Corporation.
  */
 
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/gpio/driver.h>
@@ -38,8 +39,6 @@
  */
 #define MUX_PIN_ID_MASK		GENMASK(15, 0)
 #define MUX_FUNC_MASK		GENMASK(31, 16)
-#define MUX_FUNC_OFFS		16
-#define MUX_FUNC(pinconf)	(((pinconf) & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
 
 /* PIN capabilities */
 #define PIN_CFG_IOLH_A			BIT(0)
@@ -81,8 +80,12 @@
  * n indicates number of pins in the port, a is the register index
  * and f is pin configuration capabilities supported.
  */
-#define RZG2L_GPIO_PORT_PACK(n, a, f)	(((n) << 28) | ((a) << 20) | (f))
-#define RZG2L_GPIO_PORT_GET_PINCNT(x)	(((x) & GENMASK(30, 28)) >> 28)
+#define PIN_CFG_PIN_CNT_MASK		GENMASK(30, 28)
+#define PIN_CFG_PIN_REG_MASK		GENMASK(27, 20)
+#define PIN_CFG_MASK			GENMASK(19, 0)
+#define RZG2L_GPIO_PORT_PACK(n, a, f)	(FIELD_PREP_CONST(PIN_CFG_PIN_CNT_MASK, (n)) | \
+					 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
+					 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
 
 /*
  * BIT(31) indicates dedicated pin, p is the register index while
@@ -90,14 +93,18 @@
  * (b * 8) and f is the pin configuration capabilities supported.
  */
 #define RZG2L_SINGLE_PIN		BIT(31)
+#define RZG2L_SINGLE_PIN_INDEX_MASK	GENMASK(30, 24)
+#define RZG2L_SINGLE_PIN_BITS_MASK	GENMASK(22, 20)
+
 #define RZG2L_SINGLE_PIN_PACK(p, b, f)	(RZG2L_SINGLE_PIN | \
-					 ((p) << 24) | ((b) << 20) | (f))
-#define RZG2L_SINGLE_PIN_GET_BIT(x)	(((x) & GENMASK(22, 20)) >> 20)
+					 FIELD_PREP_CONST(RZG2L_SINGLE_PIN_INDEX_MASK, (p)) | \
+					 FIELD_PREP_CONST(RZG2L_SINGLE_PIN_BITS_MASK, (b)) | \
+					 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
 
-#define RZG2L_PIN_CFG_TO_CAPS(cfg)		((cfg) & GENMASK(19, 0))
+#define RZG2L_PIN_CFG_TO_CAPS(cfg)		((cfg) & PIN_CFG_MASK)
 #define RZG2L_PIN_CFG_TO_PORT_OFFSET(cfg)	((cfg) & RZG2L_SINGLE_PIN ? \
-						(((cfg) & GENMASK(30, 24)) >> 24) : \
-						(((cfg) & GENMASK(26, 20)) >> 20))
+						 FIELD_GET(RZG2L_SINGLE_PIN_INDEX_MASK, (cfg)) : \
+						 FIELD_GET(PIN_CFG_PIN_REG_MASK, (cfg)))
 
 #define P(off)			(0x0000 + (off))
 #define PM(off)			(0x0100 + (off) * 2)
@@ -432,8 +439,8 @@ static int rzg2l_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		ret = of_property_read_u32_index(np, "pinmux", i, &value);
 		if (ret)
 			goto done;
-		pins[i] = value & MUX_PIN_ID_MASK;
-		psel_val[i] = MUX_FUNC(value);
+		pins[i] = FIELD_GET(MUX_PIN_ID_MASK, value);
+		psel_val[i] = FIELD_GET(MUX_FUNC_MASK, value);
 	}
 
 	if (parent) {
@@ -560,7 +567,7 @@ static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev,
 static int rzg2l_validate_gpio_pin(struct rzg2l_pinctrl *pctrl,
 				   u32 cfg, u32 port, u8 bit)
 {
-	u8 pincount = RZG2L_GPIO_PORT_GET_PINCNT(cfg);
+	u8 pincount = FIELD_GET(PIN_CFG_PIN_CNT_MASK, cfg);
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(cfg);
 	u32 data;
 
@@ -868,7 +875,7 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 	off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	cfg = RZG2L_PIN_CFG_TO_CAPS(*pin_data);
 	if (*pin_data & RZG2L_SINGLE_PIN) {
-		bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+		bit = FIELD_GET(RZG2L_SINGLE_PIN_BITS_MASK, *pin_data);
 	} else {
 		bit = RZG2L_PIN_ID_TO_PIN(_pin);
 
@@ -972,7 +979,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 	off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	cfg = RZG2L_PIN_CFG_TO_CAPS(*pin_data);
 	if (*pin_data & RZG2L_SINGLE_PIN) {
-		bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+		bit = FIELD_GET(RZG2L_SINGLE_PIN_BITS_MASK, *pin_data);
 	} else {
 		bit = RZG2L_PIN_ID_TO_PIN(_pin);
 
@@ -1608,12 +1615,12 @@ static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_
 	bit = virq % 8;
 
 	if (port >= data->n_ports ||
-	    bit >= RZG2L_GPIO_PORT_GET_PINCNT(data->port_pin_configs[port]))
+	    bit >= FIELD_GET(PIN_CFG_PIN_CNT_MASK, data->port_pin_configs[port]))
 		return -EINVAL;
 
 	gpioint = bit;
 	for (i = 0; i < port; i++)
-		gpioint += RZG2L_GPIO_PORT_GET_PINCNT(data->port_pin_configs[i]);
+		gpioint += FIELD_GET(PIN_CFG_PIN_CNT_MASK, data->port_pin_configs[i]);
 
 	return gpioint;
 }
@@ -1788,7 +1795,7 @@ static void rzg2l_init_irq_valid_mask(struct gpio_chip *gc,
 		bit = offset % 8;
 
 		if (port >= pctrl->data->n_ports ||
-		    bit >= RZG2L_GPIO_PORT_GET_PINCNT(pctrl->data->port_pin_configs[port]))
+		    bit >= FIELD_GET(PIN_CFG_PIN_CNT_MASK, pctrl->data->port_pin_configs[port]))
 			clear_bit(offset, valid_mask);
 	}
 }
-- 
2.34.1

Re: [PATCH v6 1/4] pinctrl: renesas: rzg2l: Improve code for readability

[Geert Uytterhoeven]

Hi Prabhakar,

On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> As the RZ/G2L pinctrl driver is extensively utilized by numerous SoCs and
> has experienced substantial growth, enhance code readability by
> incorporating FIELD_PREP_CONST/FIELD_GET macros wherever necessary.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-pinctrl for v6.9.

> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c

> @@ -90,14 +93,18 @@
>   * (b * 8) and f is the pin configuration capabilities supported.
>   */
>  #define RZG2L_SINGLE_PIN               BIT(31)
> +#define RZG2L_SINGLE_PIN_INDEX_MASK    GENMASK(30, 24)
> +#define RZG2L_SINGLE_PIN_BITS_MASK     GENMASK(22, 20)
> +
>  #define RZG2L_SINGLE_PIN_PACK(p, b, f) (RZG2L_SINGLE_PIN | \
> -                                        ((p) << 24) | ((b) << 20) | (f))
> -#define RZG2L_SINGLE_PIN_GET_BIT(x)    (((x) & GENMASK(22, 20)) >> 20)
> +                                        FIELD_PREP_CONST(RZG2L_SINGLE_PIN_INDEX_MASK, (p)) | \
> +                                        FIELD_PREP_CONST(RZG2L_SINGLE_PIN_BITS_MASK, (b)) | \
> +                                        FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
>
> -#define RZG2L_PIN_CFG_TO_CAPS(cfg)             ((cfg) & GENMASK(19, 0))
> +#define RZG2L_PIN_CFG_TO_CAPS(cfg)             ((cfg) & PIN_CFG_MASK)

Do you mind if I drop RZG2L_PIN_CFG_TO_CAPS() and replace its two
users by FIELD_GET(PIN_CFG_MASK, *pin_data) while applying?

>  #define RZG2L_PIN_CFG_TO_PORT_OFFSET(cfg)      ((cfg) & RZG2L_SINGLE_PIN ? \
> -                                               (((cfg) & GENMASK(30, 24)) >> 24) : \
> -                                               (((cfg) & GENMASK(26, 20)) >> 20))
> +                                                FIELD_GET(RZG2L_SINGLE_PIN_INDEX_MASK, (cfg)) : \
> +                                                FIELD_GET(PIN_CFG_PIN_REG_MASK, (cfg)))
>
>  #define P(off)                 (0x0000 + (off))
>  #define PM(off)                        (0x0100 + (off) * 2)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v6 1/4] pinctrl: renesas: rzg2l: Improve code for readability

[Lad, Prabhakar]

HI Geert,

Thank you for the review.

On Tue, Jan 30, 2024 at 10:35 AM Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > As the RZ/G2L pinctrl driver is extensively utilized by numerous SoCs and
> > has experienced substantial growth, enhance code readability by
> > incorporating FIELD_PREP_CONST/FIELD_GET macros wherever necessary.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> i.e. will queue in renesas-pinctrl for v6.9.
>
> > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
>
> > @@ -90,14 +93,18 @@
> >   * (b * 8) and f is the pin configuration capabilities supported.
> >   */
> >  #define RZG2L_SINGLE_PIN               BIT(31)
> > +#define RZG2L_SINGLE_PIN_INDEX_MASK    GENMASK(30, 24)
> > +#define RZG2L_SINGLE_PIN_BITS_MASK     GENMASK(22, 20)
> > +
> >  #define RZG2L_SINGLE_PIN_PACK(p, b, f) (RZG2L_SINGLE_PIN | \
> > -                                        ((p) << 24) | ((b) << 20) | (f))
> > -#define RZG2L_SINGLE_PIN_GET_BIT(x)    (((x) & GENMASK(22, 20)) >> 20)
> > +                                        FIELD_PREP_CONST(RZG2L_SINGLE_PIN_INDEX_MASK, (p)) | \
> > +                                        FIELD_PREP_CONST(RZG2L_SINGLE_PIN_BITS_MASK, (b)) | \
> > +                                        FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
> >
> > -#define RZG2L_PIN_CFG_TO_CAPS(cfg)             ((cfg) & GENMASK(19, 0))
> > +#define RZG2L_PIN_CFG_TO_CAPS(cfg)             ((cfg) & PIN_CFG_MASK)
>
> Do you mind if I drop RZG2L_PIN_CFG_TO_CAPS() and replace its two
> users by FIELD_GET(PIN_CFG_MASK, *pin_data) while applying?
>
Fine by me.

Cheers,
Prabhakar

> >  #define RZG2L_PIN_CFG_TO_PORT_OFFSET(cfg)      ((cfg) & RZG2L_SINGLE_PIN ? \
> > -                                               (((cfg) & GENMASK(30, 24)) >> 24) : \
> > -                                               (((cfg) & GENMASK(26, 20)) >> 20))
> > +                                                FIELD_GET(RZG2L_SINGLE_PIN_INDEX_MASK, (cfg)) : \
> > +                                                FIELD_GET(PIN_CFG_PIN_REG_MASK, (cfg)))
> >
> >  #define P(off)                 (0x0000 + (off))
> >  #define PM(off)                        (0x0100 + (off) * 2)
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

[PATCH v6 2/4] pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK() macro

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Currently we assume all the port pins are sequential ie always PX_0 to
PX_n (n=1..7) exist, but on RZ/Five SoC we have additional pins P19_1 to
P28_5 which have holes in them, for example only one pin on port19 is
available and that is P19_1 and not P19_0. So to handle such cases
include pinmap for each port which would indicate the pin availability
on each port. As the pincount can be calculated based on pinmap drop this
from RZG2L_GPIO_PORT_PACK() macro.

Previously we had a max of 7 pins on each port but on RZ/Five Port-20
has 8 pins, so move the single pin configuration to BIT(63).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 56 +++++++++++++------------
 1 file changed, 29 insertions(+), 27 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index c7dc32176bfe..33ea5f8dc998 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -80,19 +80,20 @@
  * n indicates number of pins in the port, a is the register index
  * and f is pin configuration capabilities supported.
  */
-#define PIN_CFG_PIN_CNT_MASK		GENMASK(30, 28)
+#define PIN_CFG_PIN_MAP_MASK		GENMASK_ULL(35, 28)
 #define PIN_CFG_PIN_REG_MASK		GENMASK(27, 20)
 #define PIN_CFG_MASK			GENMASK(19, 0)
-#define RZG2L_GPIO_PORT_PACK(n, a, f)	(FIELD_PREP_CONST(PIN_CFG_PIN_CNT_MASK, (n)) | \
+
+#define RZG2L_GPIO_PORT_PACK(n, a, f)	((((1ULL << (n)) - 1) << 28) | \
 					 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
 					 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
 
 /*
- * BIT(31) indicates dedicated pin, p is the register index while
+ * BIT(63) indicates dedicated pin, p is the register index while
  * referencing to SR/IEN/IOLH/FILxx registers, b is the register bits
  * (b * 8) and f is the pin configuration capabilities supported.
  */
-#define RZG2L_SINGLE_PIN		BIT(31)
+#define RZG2L_SINGLE_PIN		BIT_ULL(63)
 #define RZG2L_SINGLE_PIN_INDEX_MASK	GENMASK(30, 24)
 #define RZG2L_SINGLE_PIN_BITS_MASK	GENMASK(22, 20)
 
@@ -196,12 +197,12 @@ struct rzg2l_hwcfg {
 
 struct rzg2l_dedicated_configs {
 	const char *name;
-	u32 config;
+	u64 config;
 };
 
 struct rzg2l_pinctrl_data {
 	const char * const *port_pins;
-	const u32 *port_pin_configs;
+	const u64 *port_pin_configs;
 	unsigned int n_ports;
 	const struct rzg2l_dedicated_configs *dedicated_pins;
 	unsigned int n_port_pins;
@@ -302,7 +303,7 @@ static int rzg2l_pinctrl_set_mux(struct pinctrl_dev *pctldev,
 	pins = group->grp.pins;
 
 	for (i = 0; i < group->grp.npins; i++) {
-		unsigned int *pin_data = pctrl->desc.pins[pins[i]].drv_data;
+		u64 *pin_data = pctrl->desc.pins[pins[i]].drv_data;
 		u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 		u32 pin = RZG2L_PIN_ID_TO_PIN(pins[i]);
 
@@ -565,13 +566,13 @@ static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev,
 }
 
 static int rzg2l_validate_gpio_pin(struct rzg2l_pinctrl *pctrl,
-				   u32 cfg, u32 port, u8 bit)
+				   u64 cfg, u32 port, u8 bit)
 {
-	u8 pincount = FIELD_GET(PIN_CFG_PIN_CNT_MASK, cfg);
+	u8 pinmap = FIELD_GET(PIN_CFG_PIN_MAP_MASK, cfg);
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(cfg);
-	u32 data;
+	u64 data;
 
-	if (bit >= pincount || port >= pctrl->data->n_port_pins)
+	if (!(pinmap & BIT(bit)) || port >= pctrl->data->n_port_pins)
 		return -EINVAL;
 
 	data = pctrl->data->port_pin_configs[port];
@@ -863,7 +864,7 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 	enum pin_config_param param = pinconf_to_config_param(*config);
 	const struct rzg2l_hwcfg *hwcfg = pctrl->data->hwcfg;
 	const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
-	unsigned int *pin_data = pin->drv_data;
+	u64 *pin_data = pin->drv_data;
 	unsigned int arg = 0;
 	u32 off, cfg;
 	int ret;
@@ -966,7 +967,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 	const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
 	const struct rzg2l_hwcfg *hwcfg = pctrl->data->hwcfg;
 	struct rzg2l_pinctrl_pin_settings settings = pctrl->settings[_pin];
-	unsigned int *pin_data = pin->drv_data;
+	u64 *pin_data = pin->drv_data;
 	enum pin_config_param param;
 	unsigned int i, arg, index;
 	u32 cfg, off;
@@ -1171,7 +1172,7 @@ static int rzg2l_gpio_request(struct gpio_chip *chip, unsigned int offset)
 {
 	struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
 	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[offset];
-	u32 *pin_data = pin_desc->drv_data;
+	u64 *pin_data = pin_desc->drv_data;
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	u32 port = RZG2L_PIN_ID_TO_PORT(offset);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
@@ -1203,7 +1204,7 @@ static void rzg2l_gpio_set_direction(struct rzg2l_pinctrl *pctrl, u32 offset,
 				     bool output)
 {
 	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[offset];
-	unsigned int *pin_data = pin_desc->drv_data;
+	u64 *pin_data = pin_desc->drv_data;
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
 	unsigned long flags;
@@ -1224,7 +1225,7 @@ static int rzg2l_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 {
 	struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
 	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[offset];
-	unsigned int *pin_data = pin_desc->drv_data;
+	u64 *pin_data = pin_desc->drv_data;
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
 
@@ -1255,7 +1256,7 @@ static void rzg2l_gpio_set(struct gpio_chip *chip, unsigned int offset,
 {
 	struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
 	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[offset];
-	unsigned int *pin_data = pin_desc->drv_data;
+	u64 *pin_data = pin_desc->drv_data;
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
 	unsigned long flags;
@@ -1288,7 +1289,7 @@ static int rzg2l_gpio_get(struct gpio_chip *chip, unsigned int offset)
 {
 	struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
 	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[offset];
-	unsigned int *pin_data = pin_desc->drv_data;
+	u64 *pin_data = pin_desc->drv_data;
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
 	u16 reg16;
@@ -1373,7 +1374,7 @@ static const char * const rzg2l_gpio_names[] = {
 	"P48_0", "P48_1", "P48_2", "P48_3", "P48_4", "P48_5", "P48_6", "P48_7",
 };
 
-static const u32 r9a07g044_gpio_configs[] = {
+static const u64 r9a07g044_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
@@ -1425,7 +1426,7 @@ static const u32 r9a07g044_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(5, 0x40, RZG2L_MPXED_PIN_FUNCS),
 };
 
-static const u32 r9a07g043_gpio_configs[] = {
+static const u64 r9a07g043_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(4, 0x10, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(5, 0x11, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(4, 0x12, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
@@ -1447,7 +1448,7 @@ static const u32 r9a07g043_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS),
 };
 
-static const u32 r9a08g045_gpio_configs[] = {
+static const u64 r9a08g045_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(4, 0x20, RZG3S_MPXED_PIN_FUNCS(A)),			/* P0  */
 	RZG2L_GPIO_PORT_PACK(5, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_C |
 								PIN_CFG_IO_VMC_ETH0)) |
@@ -1615,12 +1616,12 @@ static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_
 	bit = virq % 8;
 
 	if (port >= data->n_ports ||
-	    bit >= FIELD_GET(PIN_CFG_PIN_CNT_MASK, data->port_pin_configs[port]))
+	    bit >= hweight8(FIELD_GET(PIN_CFG_PIN_MAP_MASK, data->port_pin_configs[port])))
 		return -EINVAL;
 
 	gpioint = bit;
 	for (i = 0; i < port; i++)
-		gpioint += FIELD_GET(PIN_CFG_PIN_CNT_MASK, data->port_pin_configs[i]);
+		gpioint += hweight8(FIELD_GET(PIN_CFG_PIN_MAP_MASK, data->port_pin_configs[i]));
 
 	return gpioint;
 }
@@ -1631,7 +1632,7 @@ static void rzg2l_gpio_irq_disable(struct irq_data *d)
 	struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
 	unsigned int hwirq = irqd_to_hwirq(d);
 	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[hwirq];
-	unsigned int *pin_data = pin_desc->drv_data;
+	u64 *pin_data = pin_desc->drv_data;
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(hwirq);
 	unsigned long flags;
@@ -1658,7 +1659,7 @@ static void rzg2l_gpio_irq_enable(struct irq_data *d)
 	struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
 	unsigned int hwirq = irqd_to_hwirq(d);
 	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[hwirq];
-	unsigned int *pin_data = pin_desc->drv_data;
+	u64 *pin_data = pin_desc->drv_data;
 	u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 	u8 bit = RZG2L_PIN_ID_TO_PIN(hwirq);
 	unsigned long flags;
@@ -1795,7 +1796,8 @@ static void rzg2l_init_irq_valid_mask(struct gpio_chip *gc,
 		bit = offset % 8;
 
 		if (port >= pctrl->data->n_ports ||
-		    bit >= FIELD_GET(PIN_CFG_PIN_CNT_MASK, pctrl->data->port_pin_configs[port]))
+		    bit >= hweight8(FIELD_GET(PIN_CFG_PIN_MAP_MASK,
+					      pctrl->data->port_pin_configs[port])))
 			clear_bit(offset, valid_mask);
 	}
 }
@@ -1877,7 +1879,7 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl)
 	const struct rzg2l_hwcfg *hwcfg = pctrl->data->hwcfg;
 	struct pinctrl_pin_desc *pins;
 	unsigned int i, j;
-	u32 *pin_data;
+	u64 *pin_data;
 	int ret;
 
 	pctrl->desc.name = DRV_NAME;
-- 
2.34.1

Re: [PATCH v6 2/4] pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK() macro

[Geert Uytterhoeven]

On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Currently we assume all the port pins are sequential ie always PX_0 to
> PX_n (n=1..7) exist, but on RZ/Five SoC we have additional pins P19_1 to
> P28_5 which have holes in them, for example only one pin on port19 is
> available and that is P19_1 and not P19_0. So to handle such cases
> include pinmap for each port which would indicate the pin availability
> on each port. As the pincount can be calculated based on pinmap drop this
> from RZG2L_GPIO_PORT_PACK() macro.
>
> Previously we had a max of 7 pins on each port but on RZ/Five Port-20
> has 8 pins, so move the single pin configuration to BIT(63).
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-pinctrl for v6.9.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v6 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add the missing port pins P19 to P28 for RZ/Five SoC. These additional
pins provide expanded capabilities and are exclusive to the RZ/Five SoC.

Couple of port pins have different configuration and are not identical for
the complete port so introduce struct rzg2l_variable_pin_cfg to handle
such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config
is then assigned in rzg2l_pinctrl_get_variable_pin_cfg().

Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins
which support interrupt facility.

While at define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 213 +++++++++++++++++++++++-
 1 file changed, 204 insertions(+), 9 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 33ea5f8dc998..ac44b0f9dfa7 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -57,6 +57,8 @@
 #define PIN_CFG_IOLH_C			BIT(13)
 #define PIN_CFG_SOFT_PS			BIT(14)
 #define PIN_CFG_OEN			BIT(15)
+#define PIN_CFG_VARIABLE		BIT(16)
+#define PIN_CFG_NOGPIO_INT		BIT(17)
 
 #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \
 					(PIN_CFG_IOLH_##group | \
@@ -76,17 +78,23 @@
 					 PIN_CFG_FILNUM | \
 					 PIN_CFG_FILCLKSEL)
 
-/*
- * n indicates number of pins in the port, a is the register index
- * and f is pin configuration capabilities supported.
- */
 #define PIN_CFG_PIN_MAP_MASK		GENMASK_ULL(35, 28)
 #define PIN_CFG_PIN_REG_MASK		GENMASK(27, 20)
 #define PIN_CFG_MASK			GENMASK(19, 0)
 
-#define RZG2L_GPIO_PORT_PACK(n, a, f)	((((1ULL << (n)) - 1) << 28) | \
-					 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
-					 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
+/*
+ * m indicates the bitmap of supported pins, a is the register index
+ * and f is pin configuration capabilities supported.
+ */
+#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)	(FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
+						 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
+						 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
+
+/*
+ * n indicates number of pins in the port, a is the register index
+ * and f is pin configuration capabilities supported.
+ */
+#define RZG2L_GPIO_PORT_PACK(n, a, f)	RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
 
 /*
  * BIT(63) indicates dedicated pin, p is the register index while
@@ -200,6 +208,18 @@ struct rzg2l_dedicated_configs {
 	u64 config;
 };
 
+/**
+ * struct rzg2l_variable_pin_cfg - pin data cfg
+ * @cfg: port pin configuration
+ * @port: port number
+ * @pin: port pin
+ */
+struct rzg2l_variable_pin_cfg {
+	u32 cfg:20;
+	u32 port:5;
+	u32 pin:3;
+};
+
 struct rzg2l_pinctrl_data {
 	const char * const *port_pins;
 	const u64 *port_pin_configs;
@@ -208,6 +228,8 @@ struct rzg2l_pinctrl_data {
 	unsigned int n_port_pins;
 	unsigned int n_dedicated_pins;
 	const struct rzg2l_hwcfg *hwcfg;
+	const struct rzg2l_variable_pin_cfg *variable_pin_cfg;
+	unsigned int n_variable_pin_cfg;
 };
 
 /**
@@ -243,6 +265,143 @@ struct rzg2l_pinctrl {
 
 static const u16 available_ps[] = { 1800, 2500, 3300 };
 
+#ifdef CONFIG_RISCV
+static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl,
+					      u64 pincfg,
+					      unsigned int port,
+					      u8 pin)
+{
+	unsigned int i;
+
+	for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) {
+		if (pctrl->data->variable_pin_cfg[i].port == port &&
+		    pctrl->data->variable_pin_cfg[i].pin == pin)
+			return (pincfg & ~PIN_CFG_VARIABLE) | pctrl->data->variable_pin_cfg[i].cfg;
+	}
+
+	return 0;
+}
+
+static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = {
+	{
+		.port = 20,
+		.pin = 0,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 1,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 2,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_IEN  | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 3,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 4,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 5,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 6,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 7,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 1,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT
+	},
+	{
+		.port = 23,
+		.pin = 2,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 3,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 4,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 5,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 0,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 1,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 2,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 3,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 4,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 5,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_NOGPIO_INT,
+	},
+};
+#endif
+
 static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
 				       u8 pin, u8 off, u8 func)
 {
@@ -1446,6 +1605,25 @@ static const u64 r9a07g043_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS),
+#ifdef CONFIG_RISCV
+	/* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+				    PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+				    PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),			/* P19 */
+	RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE),				/* P20 */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+				    PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),			/* P21 */
+	RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+			     PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),				/* P22 */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE),			/* P23 */
+	RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE),				/* P24 */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF |
+				    PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+				    PIN_CFG_NOGPIO_INT),				/* P25 */
+	0x0,										/* P26 */
+	0x0,										/* P27 */
+	RZG2L_GPIO_PORT_PACK(6, 0x0f, RZG2L_MPXED_PIN_FUNCS | PIN_CFG_NOGPIO_INT),	/* P28 */
+#endif
 };
 
 static const u64 r9a08g045_gpio_configs[] = {
@@ -1606,12 +1784,18 @@ static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = {
 						       PIN_CFG_IO_VMC_SD1)) },
 };
 
-static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data)
+static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl)
 {
+	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq];
+	const struct rzg2l_pinctrl_data *data = pctrl->data;
+	u64 *pin_data = pin_desc->drv_data;
 	unsigned int gpioint;
 	unsigned int i;
 	u32 port, bit;
 
+	if (*pin_data & PIN_CFG_NOGPIO_INT)
+		return -EINVAL;
+
 	port = virq / 8;
 	bit = virq % 8;
 
@@ -1721,7 +1905,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
 	unsigned long flags;
 	int gpioint, irq;
 
-	gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data);
+	gpioint = rzg2l_gpio_get_gpioint(child, pctrl);
 	if (gpioint < 0)
 		return gpioint;
 
@@ -1907,6 +2091,13 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl)
 		if (i && !(i % RZG2L_PINS_PER_PORT))
 			j++;
 		pin_data[i] = pctrl->data->port_pin_configs[j];
+#ifdef CONFIG_RISCV
+		if (pin_data[i] & PIN_CFG_VARIABLE)
+			pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl,
+									 pin_data[i],
+									 j,
+									 i % RZG2L_PINS_PER_PORT);
+#endif
 		pins[i].drv_data = &pin_data[i];
 	}
 
@@ -2058,6 +2249,10 @@ static struct rzg2l_pinctrl_data r9a07g043_data = {
 	.n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT,
 	.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common),
 	.hwcfg = &rzg2l_hwcfg,
+#ifdef CONFIG_RISCV
+	.variable_pin_cfg = r9a07g043f_variable_pin_cfg,
+	.n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg),
+#endif
 };
 
 static struct rzg2l_pinctrl_data r9a07g044_data = {
-- 
2.34.1

Re: [PATCH v6 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28

[Geert Uytterhoeven]

On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Add the missing port pins P19 to P28 for RZ/Five SoC. These additional
> pins provide expanded capabilities and are exclusive to the RZ/Five SoC.
>
> Couple of port pins have different configuration and are not identical for
> the complete port so introduce struct rzg2l_variable_pin_cfg to handle
> such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config
> is then assigned in rzg2l_pinctrl_get_variable_pin_cfg().
>
> Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins
> which support interrupt facility.
>
> While at define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK().
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-pinctrl for v6.9.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v6 4/4] riscv: dts: renesas: r9a07g043f: Update gpio-ranges property

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

On RZ/Five we have additional pins compared to the RZ/G2UL SoC so update
the gpio-ranges property in RZ/Five SoC DTSI.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
index d2272a0bfb61..aa3b1d2b999d 100644
--- a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -46,6 +46,10 @@ cpu0_intc: interrupt-controller {
 	};
 };
 
+&pinctrl {
+	gpio-ranges = <&pinctrl 0 0 232>;
+};
+
 &soc {
 	dma-noncoherent;
 	interrupt-parent = <&plic>;
-- 
2.34.1

Re: [PATCH v6 4/4] riscv: dts: renesas: r9a07g043f: Update gpio-ranges property

[Geert Uytterhoeven]

On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> On RZ/Five we have additional pins compared to the RZ/G2UL SoC so update
> the gpio-ranges property in RZ/Five SoC DTSI.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-pinctrl for v6.10, as this has a hard
dependency on the pin control patches.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v6 4/4] riscv: dts: renesas: r9a07g043f: Update gpio-ranges property

[Geert Uytterhoeven]

Hi Prabhakar,

On Tue, Jan 30, 2024 at 11:38 AM Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
> On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > On RZ/Five we have additional pins compared to the RZ/G2UL SoC so update
> > the gpio-ranges property in RZ/Five SoC DTSI.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> i.e. will queue in renesas-pinctrl for v6.10, as this has a hard
> dependency on the pin control patches.

It's worse: the pin control patches without the DT patch breaks, soo.
So I have no choice but merging patch 3/4 and 4/4.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v6 4/4] riscv: dts: renesas: r9a07g043f: Update gpio-ranges property

[Lad, Prabhakar]

Hi Geert,

On Wed, Jan 31, 2024 at 1:49 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Tue, Jan 30, 2024 at 11:38 AM Geert Uytterhoeven
> <geert@linux-m68k.org> wrote:
> > On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > >
> > > On RZ/Five we have additional pins compared to the RZ/G2UL SoC so update
> > > the gpio-ranges property in RZ/Five SoC DTSI.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > i.e. will queue in renesas-pinctrl for v6.10, as this has a hard
> > dependency on the pin control patches.
>
> It's worse: the pin control patches without the DT patch breaks, soo.
> So I have no choice but merging patch 3/4 and 4/4.
>
Fine by me.

Cheers,
Prabhakar