[PATCH v4 0/6] Add ADCs support for RZ/T2H and RZ/N2H

[PATCH v4 0/6] Add ADCs support for RZ/T2H and RZ/N2H

[Cosmin Tanislav]

Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs include three
12-Bit successive approximation A/D converters.

RZ/T2H has two ADCs with 4 channels and one with 6.
RZ/N2H has two ADCs with 4 channels and one with 15.

Add support for them.

V4:
 * pick up tags
 * require r9a09g077 as fallback for r9a09g087
 * remove per-SoC restrictions
 * add depends on ARCH_RENESAS || COMPILE_TEST
 * inline RZT2H_NAME, RZT2H_ADC_VREF_MV, RZT2H_ADC_RESOLUTION values
 * remove renesas,r9a09g087-adc from of_match_table

V3:
 * remove leftover renesas,max-channels property from SoC dts
 * split rzt2h_adc_start_stop() into rzt2h_adc_start() and
   rzt2h_adc_stop(), getting rid of mask variable
 * use FIELD_MODIFY() to clear and set at the same time
 * switch from guard(mutex) to mutex_lock() & mutex_unlock() to keep
   pm_runtime_put_autosuspend() out of the mutex and to avoid using both
   guard() and goto in the same function
 * inline ret and irq declarations
 * use private state rather than indio_dev for platform_set_drvdata() to
   avoid extra pointer arithmetic
 * pick up Reviewed-by for the driver from Nuno
 * pick up Acked-by for the bindings from Conor
 * pick up Reviewed-by for the bindings from Geert

V2:
 * pick up Reviewed-by from Geert
 * dt-bindings: move required after patternProperties
 * dt-bindings: describe 16 channels, but limit per-SoC to 6 / 15
 * dt-bindings: use uppercase for clock descriptions
 * remove max-channels property and find it from parsed channel subnodes
 * remove start/stop wrappers
 * stop calibration even on failure
 * move data reading to rzt2h_adc_read_single() instead of interrupt
 * handler

Cosmin Tanislav (6):
  dt-bindings: iio: adc: document RZ/T2H and RZ/N2H ADC
  iio: adc: add RZ/T2H / RZ/N2H ADC driver
  arm64: dts: renesas: r9a09g077: Add ADCs support
  arm64: dts: renesas: r9a09g087: Add ADCs support
  arm64: dts: renesas: rzt2h/rzn2h-evk: enable ADCs
  arm64: defconfig: enable RZ/T2H / RZ/N2H ADC driver

 .../iio/adc/renesas,r9a09g077-adc.yaml        | 135 ++++++++
 MAINTAINERS                                   |   8 +
 arch/arm64/boot/dts/renesas/r9a09g077.dtsi    |  66 ++++
 .../dts/renesas/r9a09g077m44-rzt2h-evk.dts    |  28 ++
 arch/arm64/boot/dts/renesas/r9a09g087.dtsi    |  66 ++++
 .../dts/renesas/r9a09g087m44-rzn2h-evk.dts    |  64 ++++
 .../dts/renesas/rzt2h-n2h-evk-common.dtsi     |  79 +++++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/iio/adc/Kconfig                       |  11 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/rzt2h_adc.c                   | 304 ++++++++++++++++++
 11 files changed, 763 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
 create mode 100644 drivers/iio/adc/rzt2h_adc.c

-- 
2.51.0

[PATCH v4 1/6] dt-bindings: iio: adc: document RZ/T2H and RZ/N2H ADC

[Cosmin Tanislav]

Document the A/D 12-Bit successive approximation converters found in the
Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.

RZ/T2H has two ADCs with 4 channels and one with 6.
RZ/N2H has two ADCs with 4 channels and one with 15.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../iio/adc/renesas,r9a09g077-adc.yaml        | 135 ++++++++++++++++++
 MAINTAINERS                                   |   7 +
 2 files changed, 142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
new file mode 100644
index 000000000000..dc0206b28231
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/T2H / RZ/N2H ADC12
+
+maintainers:
+  - Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
+
+description: |
+  A/D Converter block is a successive approximation analog-to-digital converter
+  with a 12-bit accuracy. Up to 16 analog input channels can be selected.
+  Conversions can be performed in single or continuous mode. Result of the ADC
+  is stored in a 16-bit data register corresponding to each channel.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,r9a09g087-adc # RZ/N2H
+          - const: renesas,r9a09g077-adc # RZ/T2H
+      - items:
+          - const: renesas,r9a09g077-adc # RZ/T2H
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: A/D scan end interrupt
+      - description: A/D scan end interrupt for Group B
+      - description: A/D scan end interrupt for Group C
+      - description: Window A compare match
+      - description: Window B compare match
+      - description: Compare match
+      - description: Compare mismatch
+
+  interrupt-names:
+    items:
+      - const: adi
+      - const: gbadi
+      - const: gcadi
+      - const: cmpai
+      - const: cmpbi
+      - const: wcmpm
+      - const: wcmpum
+
+  clocks:
+    items:
+      - description: Converter clock
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: adclk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    $ref: adc.yaml
+    type: object
+    description: The external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number.
+        maximum: 15
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    adc@80008000 {
+      compatible = "renesas,r9a09g077-adc";
+      reg = <0x80008000 0x400>;
+      interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>;
+      interrupt-names = "adi", "gbadi", "gcadi",
+                        "cmpai", "cmpbi", "wcmpm", "wcmpum";
+      clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+               <&cpg CPG_MOD 225>;
+      clock-names = "adclk", "pclk";
+      power-domains = <&cpg>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #io-channel-cells = <1>;
+
+      channel@0 {
+        reg = <0x0>;
+      };
+      channel@1 {
+        reg = <0x1>;
+      };
+      channel@2 {
+        reg = <0x2>;
+      };
+      channel@3 {
+        reg = <0x3>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 07363437c278..ff2a3257a498 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21835,6 +21835,13 @@ S:	Supported
 F:	Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
 F:	drivers/counter/rz-mtu3-cnt.c
 
+RENESAS RZ/T2H / RZ/N2H A/D DRIVER
+M:	Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
+L:	linux-iio@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
+
 RENESAS RTCA-3 RTC DRIVER
 M:	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
 L:	linux-rtc@vger.kernel.org
-- 
2.51.0

[PATCH v4 2/6] iio: adc: add RZ/T2H / RZ/N2H ADC driver

[Cosmin Tanislav]

Add support for the A/D 12-Bit successive approximation converters found
in the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.

RZ/T2H has two ADCs with 4 channels and one with 6.
RZ/N2H has two ADCs with 4 channels and one with 15.

Conversions can be performed in single or continuous mode. Result of the
conversion is stored in a 16-bit data register corresponding to each
channel.

The conversions can be started by a software trigger, a synchronous
trigger (from MTU or from ELC) or an asynchronous external trigger (from
ADTRGn# pin).

Only single mode with software trigger is supported for now.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
---
 MAINTAINERS                 |   1 +
 drivers/iio/adc/Kconfig     |  11 ++
 drivers/iio/adc/Makefile    |   1 +
 drivers/iio/adc/rzt2h_adc.c | 304 ++++++++++++++++++++++++++++++++++++
 4 files changed, 317 insertions(+)
 create mode 100644 drivers/iio/adc/rzt2h_adc.c

diff --git a/MAINTAINERS b/MAINTAINERS
index ff2a3257a498..28f939ed03f4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21841,6 +21841,7 @@ L:	linux-iio@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
+F:	drivers/iio/adc/rzt2h_adc.c
 
 RENESAS RTCA-3 RTC DRIVER
 M:	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 58a14e6833f6..b0580fcefef5 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1403,6 +1403,17 @@ config RZG2L_ADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rzg2l_adc.
 
+config RZT2H_ADC
+	tristate "Renesas RZ/T2H / RZ/N2H ADC driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select IIO_ADC_HELPER
+	help
+	  Say yes here to build support for the ADC found in Renesas
+	  RZ/T2H / RZ/N2H SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rzt2h_adc.
+
 config SC27XX_ADC
 	tristate "Spreadtrum SC27xx series PMICs ADC"
 	depends on MFD_SC27XX_PMIC || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d008f78dc010..ed647a734c51 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_ROHM_BD79112) += rohm-bd79112.o
 obj-$(CONFIG_ROHM_BD79124) += rohm-bd79124.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
+obj-$(CONFIG_RZT2H_ADC) += rzt2h_adc.o
 obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
 obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o
 obj-$(CONFIG_SOPHGO_CV1800B_ADC) += sophgo-cv1800b-adc.o
diff --git a/drivers/iio/adc/rzt2h_adc.c b/drivers/iio/adc/rzt2h_adc.c
new file mode 100644
index 000000000000..33ce5cc44ff4
--- /dev/null
+++ b/drivers/iio/adc/rzt2h_adc.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/iio/adc-helpers.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+
+#define RZT2H_ADCSR_REG			0x00
+#define RZT2H_ADCSR_ADIE_MASK		BIT(12)
+#define RZT2H_ADCSR_ADCS_MASK		GENMASK(14, 13)
+#define RZT2H_ADCSR_ADCS_SINGLE		0b00
+#define RZT2H_ADCSR_ADST_MASK		BIT(15)
+
+#define RZT2H_ADANSA0_REG		0x04
+#define RZT2H_ADANSA0_CH_MASK(x)	BIT(x)
+
+#define RZT2H_ADDR_REG(x)		(0x20 + 0x2 * (x))
+
+#define RZT2H_ADCALCTL_REG		0x1f0
+#define RZT2H_ADCALCTL_CAL_MASK		BIT(0)
+#define RZT2H_ADCALCTL_CAL_RDY_MASK	BIT(1)
+#define RZT2H_ADCALCTL_CAL_ERR_MASK	BIT(2)
+
+#define RZT2H_ADC_MAX_CHANNELS		16
+
+struct rzt2h_adc {
+	void __iomem *base;
+	struct device *dev;
+
+	struct completion completion;
+	/* lock to protect against multiple access to the device */
+	struct mutex lock;
+
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+	unsigned int max_channels;
+};
+
+static void rzt2h_adc_start(struct rzt2h_adc *adc, unsigned int conversion_type)
+{
+	u16 reg;
+
+	reg = readw(adc->base + RZT2H_ADCSR_REG);
+
+	/* Set conversion type */
+	FIELD_MODIFY(RZT2H_ADCSR_ADCS_MASK, &reg, conversion_type);
+
+	/* Set end of conversion interrupt and start bit. */
+	reg |= RZT2H_ADCSR_ADIE_MASK | RZT2H_ADCSR_ADST_MASK;
+
+	writew(reg, adc->base + RZT2H_ADCSR_REG);
+}
+
+static void rzt2h_adc_stop(struct rzt2h_adc *adc)
+{
+	u16 reg;
+
+	reg = readw(adc->base + RZT2H_ADCSR_REG);
+
+	/* Clear end of conversion interrupt and start bit. */
+	reg &= ~(RZT2H_ADCSR_ADIE_MASK | RZT2H_ADCSR_ADST_MASK);
+
+	writew(reg, adc->base + RZT2H_ADCSR_REG);
+}
+
+static int rzt2h_adc_read_single(struct rzt2h_adc *adc, unsigned int ch, int *val)
+{
+	int ret;
+
+	ret = pm_runtime_resume_and_get(adc->dev);
+	if (ret)
+		return ret;
+
+	mutex_lock(&adc->lock);
+
+	reinit_completion(&adc->completion);
+
+	/* Enable a single channel */
+	writew(RZT2H_ADANSA0_CH_MASK(ch), adc->base + RZT2H_ADANSA0_REG);
+
+	rzt2h_adc_start(adc, RZT2H_ADCSR_ADCS_SINGLE);
+
+	/*
+	 * Datasheet Page 2770, Table 41.1:
+	 * 0.32us per channel when sample-and-hold circuits are not in use.
+	 */
+	ret = wait_for_completion_timeout(&adc->completion, usecs_to_jiffies(1));
+	if (!ret) {
+		ret = -ETIMEDOUT;
+		goto disable;
+	}
+
+	*val = readw(adc->base + RZT2H_ADDR_REG(ch));
+	ret = IIO_VAL_INT;
+
+disable:
+	rzt2h_adc_stop(adc);
+
+	mutex_unlock(&adc->lock);
+
+	pm_runtime_put_autosuspend(adc->dev);
+
+	return ret;
+}
+
+static void rzt2h_adc_set_cal(struct rzt2h_adc *adc, bool cal)
+{
+	u16 val;
+
+	val = readw(adc->base + RZT2H_ADCALCTL_REG);
+	if (cal)
+		val |= RZT2H_ADCALCTL_CAL_MASK;
+	else
+		val &= ~RZT2H_ADCALCTL_CAL_MASK;
+
+	writew(val, adc->base + RZT2H_ADCALCTL_REG);
+}
+
+static int rzt2h_adc_calibrate(struct rzt2h_adc *adc)
+{
+	u16 val;
+	int ret;
+
+	rzt2h_adc_set_cal(adc, true);
+
+	ret = read_poll_timeout(readw, val, val & RZT2H_ADCALCTL_CAL_RDY_MASK,
+				200, 1000, true, adc->base + RZT2H_ADCALCTL_REG);
+	if (ret) {
+		dev_err(adc->dev, "Calibration timed out: %d\n", ret);
+		return ret;
+	}
+
+	rzt2h_adc_set_cal(adc, false);
+
+	if (val & RZT2H_ADCALCTL_CAL_ERR_MASK) {
+		dev_err(adc->dev, "Calibration failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rzt2h_adc_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2, long mask)
+{
+	struct rzt2h_adc *adc = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return rzt2h_adc_read_single(adc, chan->channel, val);
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1800;
+		*val2 = 12;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info rzt2h_adc_iio_info = {
+	.read_raw = rzt2h_adc_read_raw,
+};
+
+static irqreturn_t rzt2h_adc_isr(int irq, void *private)
+{
+	struct rzt2h_adc *adc = private;
+
+	complete(&adc->completion);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_chan_spec rzt2h_adc_chan_template = {
+	.indexed = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			      BIT(IIO_CHAN_INFO_SCALE),
+	.type = IIO_VOLTAGE,
+};
+
+static int rzt2h_adc_parse_properties(struct rzt2h_adc *adc)
+{
+	struct iio_chan_spec *chan_array;
+	unsigned int i;
+	int ret;
+
+	ret = devm_iio_adc_device_alloc_chaninfo_se(adc->dev,
+						    &rzt2h_adc_chan_template,
+						    RZT2H_ADC_MAX_CHANNELS - 1,
+						    &chan_array);
+	if (ret < 0)
+		return dev_err_probe(adc->dev, ret, "Failed to read channel info");
+
+	adc->num_channels = ret;
+	adc->channels = chan_array;
+
+	for (i = 0; i < adc->num_channels; i++)
+		if (chan_array[i].channel + 1 > adc->max_channels)
+			adc->max_channels = chan_array[i].channel + 1;
+
+	return 0;
+}
+
+static int rzt2h_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct rzt2h_adc *adc;
+	int ret, irq;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->dev = dev;
+	init_completion(&adc->completion);
+
+	ret = devm_mutex_init(dev, &adc->lock);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, adc);
+
+	ret = rzt2h_adc_parse_properties(adc);
+	if (ret)
+		return ret;
+
+	adc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(adc->base))
+		return PTR_ERR(adc->base);
+
+	pm_runtime_set_autosuspend_delay(dev, 300);
+	pm_runtime_use_autosuspend(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
+
+	irq = platform_get_irq_byname(pdev, "adi");
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, rzt2h_adc_isr, 0, dev_name(dev), adc);
+	if (ret)
+		return ret;
+
+	indio_dev->name = "rzt2h-adc";
+	indio_dev->info = &rzt2h_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = adc->channels;
+	indio_dev->num_channels = adc->num_channels;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id rzt2h_adc_match[] = {
+	{ .compatible = "renesas,r9a09g077-adc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rzt2h_adc_match);
+
+static int rzt2h_adc_pm_runtime_resume(struct device *dev)
+{
+	struct rzt2h_adc *adc = dev_get_drvdata(dev);
+
+	/*
+	 * Datasheet Page 2810, Section 41.5.6:
+	 * After release from the module-stop state, wait for at least
+	 * 0.5 µs before starting A/D conversion.
+	 */
+	fsleep(1);
+
+	return rzt2h_adc_calibrate(adc);
+}
+
+static const struct dev_pm_ops rzt2h_adc_pm_ops = {
+	RUNTIME_PM_OPS(NULL, rzt2h_adc_pm_runtime_resume, NULL)
+};
+
+static struct platform_driver rzt2h_adc_driver = {
+	.probe		= rzt2h_adc_probe,
+	.driver		= {
+		.name		= "rzt2h-adc",
+		.of_match_table = rzt2h_adc_match,
+		.pm		= pm_ptr(&rzt2h_adc_pm_ops),
+	},
+};
+
+module_platform_driver(rzt2h_adc_driver);
+
+MODULE_AUTHOR("Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/T2H / RZ/N2H ADC driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("IIO_DRIVER");
-- 
2.51.0

[PATCH v4 3/6] arm64: dts: renesas: r9a09g077: Add ADCs support

[Cosmin Tanislav]

Renesas RZ/T2H (R9A09G077) includes three 12-Bit successive
approximation A/D converters, two 4-channel ADCs, and one 6-channel ADC.

Add support for all of them.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r9a09g077.dtsi | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
index 37a696d8ec6d..320a7bf5292c 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
@@ -666,6 +666,72 @@ gic: interrupt-controller@83000000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
 
+		adc0: adc@90014000 {
+			compatible = "renesas,r9a09g077-adc";
+			reg = <0 0x90014000 0 0x400>;
+			interrupts = <GIC_SPI 698 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 699 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 700 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 851 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 852 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+				 <&cpg CPG_MOD 206>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc1: adc@90014400 {
+			compatible = "renesas,r9a09g077-adc";
+			reg = <0 0x90014400 0 0x400>;
+			interrupts = <GIC_SPI 703 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 853 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 854 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+				 <&cpg CPG_MOD 207>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc2: adc@80008000 {
+			compatible = "renesas,r9a09g077-adc";
+			reg = <0 0x80008000 0 0x400>;
+			interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+				 <&cpg CPG_MOD 225>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
 		ohci: usb@92040000 {
 			compatible = "generic-ohci";
 			reg = <0 0x92040000 0 0x100>;
-- 
2.51.0

[PATCH v4 4/6] arm64: dts: renesas: r9a09g087: Add ADCs support

[Cosmin Tanislav]

Renesas RZ/T2H (R9A09G087) includes three 12-Bit successive
approximation A/D converters, two 4-channel ADCs, and one 15-channel
ADC.

Add support for all of them.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r9a09g087.dtsi | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
index 88669868f0ee..53d9266e58ca 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
@@ -666,6 +666,72 @@ gic: interrupt-controller@83000000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
 
+		adc0: adc@90014000 {
+			compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc";
+			reg = <0 0x90014000 0 0x400>;
+			interrupts = <GIC_SPI 698 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 699 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 700 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 851 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 852 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>,
+				 <&cpg CPG_MOD 206>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc1: adc@90014400 {
+			compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc";
+			reg = <0 0x90014400 0 0x400>;
+			interrupts = <GIC_SPI 703 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 853 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 854 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>,
+				 <&cpg CPG_MOD 207>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc2: adc@80008000 {
+			compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc";
+			reg = <0 0x80008000 0 0x400>;
+			interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>,
+				 <&cpg CPG_MOD 225>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
 		ohci: usb@92040000 {
 			compatible = "generic-ohci";
 			reg = <0 0x92040000 0 0x100>;
-- 
2.51.0

[PATCH v4 5/6] arm64: dts: renesas: rzt2h/rzn2h-evk: enable ADCs

[Cosmin Tanislav]

The ADCs on RZ/T2H and RZ/N2H are exposed on the evaluation kit boards.

Enable them.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../dts/renesas/r9a09g077m44-rzt2h-evk.dts    | 28 +++++++
 .../dts/renesas/r9a09g087m44-rzn2h-evk.dts    | 64 +++++++++++++++
 .../dts/renesas/rzt2h-n2h-evk-common.dtsi     | 79 +++++++++++++++++++
 3 files changed, 171 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
index 9170c563208a..e94b84393bd9 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -252,3 +252,31 @@ usb_pins: usb-pins {
 			 <RZT2H_PORT_PINMUX(0, 1, 0x13)>; /* OVRCUR */
 	};
 };
+
+&adc2 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+
+	channel@4 {
+		reg = <0x4>;
+	};
+
+	channel@5 {
+		reg = <0x5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
index 279f2510044b..d27da157c6d6 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
@@ -305,3 +305,67 @@ usb_pins: usb-pins {
 			 <RZT2H_PORT_PINMUX(2, 3, 0x13)>; /* OVRCUR */
 	};
 };
+
+&adc2 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+
+	channel@4 {
+		reg = <0x4>;
+	};
+
+	channel@5 {
+		reg = <0x5>;
+	};
+
+	channel@6 {
+		reg = <0x6>;
+	};
+
+	channel@7 {
+		reg = <0x7>;
+	};
+
+	channel@8 {
+		reg = <0x8>;
+	};
+
+	channel@9 {
+		reg = <0x9>;
+	};
+
+	channel@a {
+		reg = <0xa>;
+	};
+
+	channel@b {
+		reg = <0xb>;
+	};
+
+	channel@c {
+		reg = <0xc>;
+	};
+
+	channel@d {
+		reg = <0xd>;
+	};
+
+	channel@e {
+		reg = <0xe>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
index 9ca26725a3e9..a7123a9ec684 100644
--- a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
@@ -338,3 +338,82 @@ &wdt2 {
 	status = "okay";
 	timeout-sec = <60>;
 };
+
+/*
+ * ADC0 AN000 can be connected to a potentiometer on the board or
+ * exposed on ADC header.
+ *
+ * T2H:
+ * SW17[1] = ON, SW17[2] = OFF - Potentiometer
+ * SW17[1] = OFF, SW17[2] = ON  - CN41 header
+ * N2H:
+ * DSW6[1] = OFF, DSW6[2] = ON - Potentiometer
+ * DSW6[1] = ON, DSW6[2] = OFF - CN3 header
+ */
+&adc0 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+};
+
+/*
+ * ADC1 AN100 can be exposed on ADC header or on mikroBUS connector.
+ *
+ * T2H:
+ * SW18[1] = ON, SW18[2] = OFF - CN42 header
+ * SW18[1] = OFF, SW18[2] = ON - mikroBUS
+ * N2H:
+ * DSW6[3] = ON, DSW6[4] = OFF - CN4 header
+ * DSW6[3] = OFF, DSW6[4] = ON - mikroBUS
+ *
+ * ADC1 AN101 can be exposed on ADC header or on Grove2 connector.
+ *
+ * T2H:
+ * SW18[3] = ON, SW18[4] = OFF - CN42 header
+ * SW18[3] = OFF, SW18[4] = ON - Grove2
+ * N2H:
+ * DSW6[5] = ON, DSW6[6] = OFF - CN4 header
+ * DSW6[5] = OFF, DSW6[6] = ON - Grove2
+ *
+ * ADC1 AN102 can be exposed on ADC header or on Grove2 connector.
+ *
+ * T2H:
+ * SW18[5] = ON, SW18[6] = OFF - CN42 header
+ * SW18[5] = OFF, SW18[6] = ON - Grove2
+ * N2H:
+ * DSW6[7] = ON, DSW6[8] = OFF - CN4 header
+ * DSW6[7] = OFF, DSW6[8] = ON - Grove2
+ */
+&adc1 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+};
-- 
2.51.0

[PATCH v4 6/6] arm64: defconfig: enable RZ/T2H / RZ/N2H ADC driver

[Cosmin Tanislav]

Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs include three
12-Bit successive approximation A/D converters.

RZ/T2H has two ADCs with 4 channels and one with 6.
RZ/N2H has two ADCs with 4 channels and one with 15.

Enable the driver for them.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 8fd1bf869942..3a1326652d47 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1581,6 +1581,7 @@ CONFIG_QCOM_SPMI_VADC=m
 CONFIG_QCOM_SPMI_ADC5=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_RZG2L_ADC=m
+CONFIG_RZT2H_ADC=m
 CONFIG_SOPHGO_CV1800B_ADC=m
 CONFIG_TI_ADS1015=m
 CONFIG_TI_AM335X_ADC=m
-- 
2.51.0

Re: [PATCH v4 0/6] Add ADCs support for RZ/T2H and RZ/N2H

[Jonathan Cameron]

On Sun,  5 Oct 2025 14:13:16 +0300
Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com> wrote:

> Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs include three
> 12-Bit successive approximation A/D converters.
> 
> RZ/T2H has two ADCs with 4 channels and one with 6.
> RZ/N2H has two ADCs with 4 channels and one with 15.

Hi Cosmin,

Looks good to me.

Applied patches 1 + 2 to the testing branch of iio.git.

I'll be rebasing that on rc1 once available then pushing out as my normal
togreg branch for linux-next to pick up.

Thanks,

Jonathan

> 
> Add support for them.
> 
> V4:
>  * pick up tags
>  * require r9a09g077 as fallback for r9a09g087
>  * remove per-SoC restrictions
>  * add depends on ARCH_RENESAS || COMPILE_TEST
>  * inline RZT2H_NAME, RZT2H_ADC_VREF_MV, RZT2H_ADC_RESOLUTION values
>  * remove renesas,r9a09g087-adc from of_match_table

Re: [PATCH v4 3/6] arm64: dts: renesas: r9a09g077: Add ADCs support

[Geert Uytterhoeven]

On Sun, 5 Oct 2025 at 13:14, Cosmin Tanislav
<cosmin-gabriel.tanislav.xa@renesas.com> wrote:
> Renesas RZ/T2H (R9A09G077) includes three 12-Bit successive
> approximation A/D converters, two 4-channel ADCs, and one 6-channel ADC.
>
> Add support for all of them.
>
> Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, will queue in renesas-devel for v6.19.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v4 4/6] arm64: dts: renesas: r9a09g087: Add ADCs support

[Geert Uytterhoeven]

On Sun, 5 Oct 2025 at 13:15, Cosmin Tanislav
<cosmin-gabriel.tanislav.xa@renesas.com> wrote:
> Renesas RZ/T2H (R9A09G087) includes three 12-Bit successive
> approximation A/D converters, two 4-channel ADCs, and one 15-channel
> ADC.
>
> Add support for all of them.
>
> Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, will queue in renesas-devel for v6.19.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v4 5/6] arm64: dts: renesas: rzt2h/rzn2h-evk: enable ADCs

[Geert Uytterhoeven]

On Sun, 5 Oct 2025 at 13:15, Cosmin Tanislav
<cosmin-gabriel.tanislav.xa@renesas.com> wrote:
> The ADCs on RZ/T2H and RZ/N2H are exposed on the evaluation kit boards.
>
> Enable them.
>
> Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, will queue in renesas-devel for v6.19.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v4 6/6] arm64: defconfig: enable RZ/T2H / RZ/N2H ADC driver

[Geert Uytterhoeven]

On Sun, 5 Oct 2025 at 13:15, Cosmin Tanislav
<cosmin-gabriel.tanislav.xa@renesas.com> wrote:
> Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs include three
> 12-Bit successive approximation A/D converters.
>
> RZ/T2H has two ADCs with 4 channels and one with 6.
> RZ/N2H has two ADCs with 4 channels and one with 15.
>
> Enable the driver for them.
>
> Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, will queue in renesas-devel for v6.19.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds