From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: Re: [PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree Date: Wed, 6 Jun 2018 09:52:24 +0200 Message-ID: References: <3923fc5f-103c-94c9-57ba-cb29e8c55d05@cogentembedded.com> <50de037c-7560-c261-f96a-f86065674c9b@cogentembedded.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <50de037c-7560-c261-f96a-f86065674c9b@cogentembedded.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Sergei Shtylyov Cc: Mark Rutland , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , Magnus Damm , Catalin Marinas , Will Deacon , Rob Herring , Linux-Renesas , Simon Horman , Linux ARM List-Id: devicetree@vger.kernel.org On Thu, May 10, 2018 at 8:12 PM, Sergei Shtylyov wrote: > Add the initial device tree for the V3H Starter Kit board. > The board has 1 debug serial port (SCIF0); include support for it, > so that the serial console can work. > > Based on the original (and large) patch by Vladimir Barinov. > > Signed-off-by: Vladimir Barinov > Signed-off-by: Sergei Shtylyov FTR: Reviewed-by: Geert Uytterhoeven > --- /dev/null > +++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts > +&pfc { > + scif0_pins: scif0 { > + groups = "scif0_data"; > + function = "scif0"; > + }; JFYI, hscif0 can be routed to the same pins, if higher performance is needed. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds