Re: [PATCH 1/2] extcon: usb-gpio: Add level trigger support

[Baolin Wang <baolin.wang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

Hi,

On 24 March 2017 at 19:08, Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
> Hi,
>
> On 2017년 03월 20일 16:59, Baolin Wang wrote:
>> Now extcon-usb-gpio only supports for GPIO egdge trigger, but VBUS/ID
>> gpios' detection can be triggered by the level trigger on some platforms.
>> Thus intoduce one property 'extcon-gpio,level-trigger' to identify this
>> situation.
>>
>> Signed-off-by: Baolin Wang <baolin.wang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>>  .../devicetree/bindings/extcon/extcon-usb-gpio.txt |    3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>> index dfc14f7..191504b 100644
>> --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>> +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>> @@ -9,6 +9,9 @@ Required properties:
>>  Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
>>  - id-gpio: gpio for USB ID pin. See gpio binding.
>>  - vbus-gpio: gpio for USB VBUS pin.
>> +- extcon-gpio,level-trigger: Boolean, set this gpio's interrupt flag to
>
> It is 'extcon-usb-gpio' instead of 'extcon-gpio'.

Sure.

>
>> +level trigger. If not specified defaults to false, gpio's interrupt flag
>> +defaults to edge trigger.
>
> I understand why you need the new flag.
> But, I'm not sure it is right way to add the new flag for interrupt flag.
>
> IMHO, I think that we need to find the more proper way to get the interrupt flag
> or maybe, we may need to implement the new helper api to get the interrupt
> flag for gpio pin when we use the gpio as the interrupt source,

Yes, I agree with you. We already have helper functions to get
interrupt flag from device tree, but we can not get the irq number of
GPIO to configure in device tree, then I introduce one new flag to
indicate the trigger type. But I like to change the patch if there are
any good suggestion. Thanks.

-- 
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html