From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baolin Wang Subject: Re: [PATCH v3 2/4] power: supply: core: Introduce properties to present the battery OCV capacity table Date: Sun, 14 Oct 2018 14:53:19 +0800 Message-ID: References: <2787f18a0366576959557d05112a069dca982269.1538033078.git.baolin.wang@linaro.org> <7dccec1694a05a524710e59a63859974b4cdae89.1538033078.git.baolin.wang@linaro.org> <20181012143530.GA28145@bogus> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <20181012143530.GA28145@bogus> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: Sebastian Reichel , Mark Rutland , Linux PM list , DTML , LKML , yuanjiang.yu@unisoc.com, Mark Brown , Craig Tatlor , Linus Walleij List-Id: devicetree@vger.kernel.org Hi Rob, On 12 October 2018 at 22:35, Rob Herring wrote: > On Thu, Sep 27, 2018 at 03:26:55PM +0800, Baolin Wang wrote: >> Some battery driver will use the open circuit voltage (OCV) value to look >> up the corresponding battery capacity percent in one certain degree Celsius. >> Thus this patch provides some battery properties to present the OCV table >> temperatures and OCV capacity table values. Moreover it also provides some >> helper functions to use the OCV capacity table for users. >> >> Suggested-by: Sebastian Reichel >> Signed-off-by: Baolin Wang >> Reviewed-by: Linus Walleij >> --- >> Changes from v2: >> - Use type __be32 to calculate the table length. >> - Update error messages. >> - Add some helper functions. >> >> Changes from v1: >> - New patch in v2. >> --- >> .../devicetree/bindings/power/supply/battery.txt | 14 +++ > > Please split binding patches. Sure. > >> drivers/power/supply/power_supply_core.c | 125 +++++++++++++++++++- >> include/linux/power_supply.h | 19 +++ >> 3 files changed, 157 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt >> index 938d027..cad38df 100644 >> --- a/Documentation/devicetree/bindings/power/supply/battery.txt >> +++ b/Documentation/devicetree/bindings/power/supply/battery.txt >> @@ -23,6 +23,16 @@ Optional Properties: >> - constant-charge-current-max-microamp: maximum constant input current >> - constant-charge-voltage-max-microvolt: maximum constant input voltage >> - factory-internal-resistance-micro-ohms: battery factory internal resistance >> + - ocv-capacity-table-0: An array providing the battery capacity percent >> + with corresponding open circuit voltage (OCV) of the battery, which >> + is used to look up battery capacity according to current OCV value. >> + - ocv-capacity-table-1: Same as ocv-capacity-table-0 >> + ...... >> + - ocv-capacity-table-n: Same as ocv-capacity-table-0 > > So it is tubles of (percent, voltage)? What's the units for voltage? Yes. The units for voltage is microvolt, and I will add some words to make it clear in next version. > > What determines the # of entries for each table? Do all tables have the > same number of entries? Not same, that depends on the battery drivers' requirement. >> + - ocv-capacity-table-temperatures: An array containing the temperature >> + in degree Celsius, for each of the battery capacity lookup table. >> + The first temperature value specifies the OCV table 0, and the second >> + temperature value specifies the OCV table 1, and so on. > > This should have unit suffix. Perhaps just "ocv-capacity-celsius" to > avoid being too long. I am fine with this. Thanks for your comments. Sebastian and Linusw, what do you think about Rob's suggestion? Thanks. -- Baolin Wang Best Regards