From: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
To: Paul Cercueil <paul@crapouillou.net>
Cc: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>,
Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>,
Mathieu Malaterre <malat@debian.org>,
Daniel Silsby <dansilsby@gmail.com>,
dmaengine@vger.kernel.org,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
Linux-MIPS <linux-mips@linux-mips.org>
Subject: Re: [PATCH 02/14] dmaengine: dma-jz4780: Separate chan/ctrl registers
Date: Wed, 4 Jul 2018 22:05:47 +0530 [thread overview]
Message-ID: <CANc+2y4dVDQoPP4zJkous=p-HYL+nu1Cxcrv0nqEMABN_4uyZw@mail.gmail.com> (raw)
In-Reply-To: <20180703123214.23090-3-paul@crapouillou.net>
Paul,
On 3 July 2018 at 18:02, Paul Cercueil <paul@crapouillou.net> wrote:
> The register area of the JZ4780 DMA core can be split into different
> sections for different purposes:
>
> * one set of registers is used to perform actions at the DMA core level,
> that will generally affect all channels;
>
> * one set of registers per DMA channel, to perform actions at the DMA
> channel level, that will only affect the channel in question.
>
> The problem rises when trying to support new versions of the JZ47xx
> Ingenic SoC. For instance, the JZ4770 has two DMA cores, each one
> with six DMA channels, and the register sets are interleaved:
> <DMA0 chan regs> <DMA1 chan regs> <DMA0 ctrl regs> <DMA1 ctrl regs>
>
> By using one memory resource for the channel-specific registers and
> one memory resource for the core-specific registers, we can support
> the JZ4770, by initializing the driver once per DMA core with different
> addresses.
As per my understanding device tree should be modified only when
hardware changes. This looks the other way around. It must be possible
to achieve what you are trying to do in this patch without changing
the device tree.
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> .../devicetree/bindings/dma/jz4780-dma.txt | 6 +-
> drivers/dma/dma-jz4780.c | 106 +++++++++++-------
> 2 files changed, 69 insertions(+), 43 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> index f25feee62b15..f9b1864f5b77 100644
> --- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> @@ -3,7 +3,8 @@
> Required properties:
>
> - compatible: Should be "ingenic,jz4780-dma"
> -- reg: Should contain the DMA controller registers location and length.
> +- reg: Should contain the DMA channel registers location and length, followed
> + by the DMA controller registers location and length.
> - interrupts: Should contain the interrupt specifier of the DMA controller.
> - interrupt-parent: Should be the phandle of the interrupt controller that
> - clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
> @@ -22,7 +23,8 @@ Example:
>
> dma: dma@13420000 {
> compatible = "ingenic,jz4780-dma";
> - reg = <0x13420000 0x10000>;
> + reg = <0x13420000 0x400
> + 0x13421000 0x40>;
>
> interrupt-parent = <&intc>;
> interrupts = <10>;
> diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
> index b40f491f0367..4d234caf5d62 100644
> --- a/drivers/dma/dma-jz4780.c
> +++ b/drivers/dma/dma-jz4780.c
> @@ -25,26 +25,26 @@
> #include "virt-dma.h"
>
> /* Global registers. */
> -#define JZ_DMA_REG_DMAC 0x1000
> -#define JZ_DMA_REG_DIRQP 0x1004
> -#define JZ_DMA_REG_DDR 0x1008
> -#define JZ_DMA_REG_DDRS 0x100c
> -#define JZ_DMA_REG_DMACP 0x101c
> -#define JZ_DMA_REG_DSIRQP 0x1020
> -#define JZ_DMA_REG_DSIRQM 0x1024
> -#define JZ_DMA_REG_DCIRQP 0x1028
> -#define JZ_DMA_REG_DCIRQM 0x102c
> +#define JZ_DMA_REG_DMAC 0x00
> +#define JZ_DMA_REG_DIRQP 0x04
> +#define JZ_DMA_REG_DDR 0x08
> +#define JZ_DMA_REG_DDRS 0x0c
> +#define JZ_DMA_REG_DMACP 0x1c
> +#define JZ_DMA_REG_DSIRQP 0x20
> +#define JZ_DMA_REG_DSIRQM 0x24
> +#define JZ_DMA_REG_DCIRQP 0x28
> +#define JZ_DMA_REG_DCIRQM 0x2c
>
> /* Per-channel registers. */
> #define JZ_DMA_REG_CHAN(n) (n * 0x20)
> -#define JZ_DMA_REG_DSA(n) (0x00 + JZ_DMA_REG_CHAN(n))
> -#define JZ_DMA_REG_DTA(n) (0x04 + JZ_DMA_REG_CHAN(n))
> -#define JZ_DMA_REG_DTC(n) (0x08 + JZ_DMA_REG_CHAN(n))
> -#define JZ_DMA_REG_DRT(n) (0x0c + JZ_DMA_REG_CHAN(n))
> -#define JZ_DMA_REG_DCS(n) (0x10 + JZ_DMA_REG_CHAN(n))
> -#define JZ_DMA_REG_DCM(n) (0x14 + JZ_DMA_REG_CHAN(n))
> -#define JZ_DMA_REG_DDA(n) (0x18 + JZ_DMA_REG_CHAN(n))
> -#define JZ_DMA_REG_DSD(n) (0x1c + JZ_DMA_REG_CHAN(n))
> +#define JZ_DMA_REG_DSA 0x00
> +#define JZ_DMA_REG_DTA 0x04
> +#define JZ_DMA_REG_DTC 0x08
> +#define JZ_DMA_REG_DRT 0x0c
> +#define JZ_DMA_REG_DCS 0x10
> +#define JZ_DMA_REG_DCM 0x14
> +#define JZ_DMA_REG_DDA 0x18
> +#define JZ_DMA_REG_DSD 0x1c
>
> #define JZ_DMA_DMAC_DMAE BIT(0)
> #define JZ_DMA_DMAC_AR BIT(2)
> @@ -140,7 +140,8 @@ enum jz_version {
>
> struct jz4780_dma_dev {
> struct dma_device dma_device;
> - void __iomem *base;
> + void __iomem *chn_base;
> + void __iomem *ctrl_base;
> struct clk *clk;
> unsigned int irq;
> unsigned int nb_channels;
> @@ -174,16 +175,28 @@ static inline struct jz4780_dma_dev *jz4780_dma_chan_parent(
> dma_device);
> }
>
> -static inline uint32_t jz4780_dma_readl(struct jz4780_dma_dev *jzdma,
> +static inline uint32_t jz4780_dma_chn_readl(struct jz4780_dma_dev *jzdma,
> + unsigned int chn, unsigned int reg)
> +{
> + return readl(jzdma->chn_base + reg + JZ_DMA_REG_CHAN(chn));
> +}
> +
> +static inline void jz4780_dma_chn_writel(struct jz4780_dma_dev *jzdma,
> + unsigned int chn, unsigned int reg, uint32_t val)
> +{
> + writel(val, jzdma->chn_base + reg + JZ_DMA_REG_CHAN(chn));
> +}
> +
> +static inline uint32_t jz4780_dma_ctrl_readl(struct jz4780_dma_dev *jzdma,
> unsigned int reg)
> {
> - return readl(jzdma->base + reg);
> + return readl(jzdma->ctrl_base + reg);
> }
>
> -static inline void jz4780_dma_writel(struct jz4780_dma_dev *jzdma,
> +static inline void jz4780_dma_ctrl_writel(struct jz4780_dma_dev *jzdma,
> unsigned int reg, uint32_t val)
> {
> - writel(val, jzdma->base + reg);
> + writel(val, jzdma->ctrl_base + reg);
> }
>
> static struct jz4780_dma_desc *jz4780_dma_desc_alloc(
> @@ -478,17 +491,18 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan)
> }
>
> /* Use 8-word descriptors. */
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id), JZ_DMA_DCS_DES8);
> + jz4780_dma_chn_writel(jzdma, jzchan->id,
> + JZ_DMA_REG_DCS, JZ_DMA_DCS_DES8);
>
> /* Write descriptor address and initiate descriptor fetch. */
> desc_phys = jzchan->desc->desc_phys +
> (jzchan->curr_hwdesc * sizeof(*jzchan->desc->desc));
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DDA(jzchan->id), desc_phys);
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DDRS, BIT(jzchan->id));
> + jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DDA, desc_phys);
> + jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DDRS, BIT(jzchan->id));
>
> /* Enable the channel. */
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id),
> - JZ_DMA_DCS_DES8 | JZ_DMA_DCS_CTE);
> + jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS,
> + JZ_DMA_DCS_DES8 | JZ_DMA_DCS_CTE);
> }
>
> static void jz4780_dma_issue_pending(struct dma_chan *chan)
> @@ -514,7 +528,7 @@ static int jz4780_dma_terminate_all(struct dma_chan *chan)
> spin_lock_irqsave(&jzchan->vchan.lock, flags);
>
> /* Clear the DMA status and stop the transfer. */
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id), 0);
> + jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS, 0);
> if (jzchan->desc) {
> vchan_terminate_vdesc(&jzchan->desc->vdesc);
> jzchan->desc = NULL;
> @@ -563,8 +577,8 @@ static size_t jz4780_dma_desc_residue(struct jz4780_dma_chan *jzchan,
> residue += desc->desc[i].dtc << jzchan->transfer_shift;
>
> if (next_sg != 0) {
> - count = jz4780_dma_readl(jzdma,
> - JZ_DMA_REG_DTC(jzchan->id));
> + count = jz4780_dma_chn_readl(jzdma, jzchan->id,
> + JZ_DMA_REG_DTC);
> residue += count << jzchan->transfer_shift;
> }
>
> @@ -611,8 +625,8 @@ static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
>
> spin_lock(&jzchan->vchan.lock);
>
> - dcs = jz4780_dma_readl(jzdma, JZ_DMA_REG_DCS(jzchan->id));
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id), 0);
> + dcs = jz4780_dma_chn_readl(jzdma, jzchan->id, JZ_DMA_REG_DCS);
> + jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS, 0);
>
> if (dcs & JZ_DMA_DCS_AR) {
> dev_warn(&jzchan->vchan.chan.dev->device,
> @@ -651,7 +665,7 @@ static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
> uint32_t pending, dmac;
> int i;
>
> - pending = jz4780_dma_readl(jzdma, JZ_DMA_REG_DIRQP);
> + pending = jz4780_dma_ctrl_readl(jzdma, JZ_DMA_REG_DIRQP);
>
> for (i = 0; i < jzdma->nb_channels; i++) {
> if (!(pending & (1<<i)))
> @@ -661,12 +675,12 @@ static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
> }
>
> /* Clear halt and address error status of all channels. */
> - dmac = jz4780_dma_readl(jzdma, JZ_DMA_REG_DMAC);
> + dmac = jz4780_dma_ctrl_readl(jzdma, JZ_DMA_REG_DMAC);
> dmac &= ~(JZ_DMA_DMAC_HLT | JZ_DMA_DMAC_AR);
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DMAC, dmac);
> + jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC, dmac);
>
> /* Clear interrupt pending status. */
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DIRQP, 0);
> + jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DIRQP, 0);
>
> return IRQ_HANDLED;
> }
> @@ -804,9 +818,19 @@ static int jz4780_dma_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - jzdma->base = devm_ioremap_resource(dev, res);
> - if (IS_ERR(jzdma->base))
> - return PTR_ERR(jzdma->base);
> + jzdma->chn_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(jzdma->chn_base))
> + return PTR_ERR(jzdma->chn_base);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!res) {
> + dev_err(dev, "failed to get I/O memory\n");
> + return -EINVAL;
> + }
> +
> + jzdma->ctrl_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(jzdma->ctrl_base))
> + return PTR_ERR(jzdma->ctrl_base);
>
> ret = platform_get_irq(pdev, 0);
> if (ret < 0) {
> @@ -864,9 +888,9 @@ static int jz4780_dma_probe(struct platform_device *pdev)
> * Also set the FMSC bit - it increases MSC performance, so it makes
> * little sense not to enable it.
> */
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DMAC,
> + jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC,
> JZ_DMA_DMAC_DMAE | JZ_DMA_DMAC_FMSC);
> - jz4780_dma_writel(jzdma, JZ_DMA_REG_DMACP, 0);
> + jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMACP, 0);
>
> INIT_LIST_HEAD(&dd->channels);
>
> --
> 2.18.0
>
>
Regards,
PrasannaKumar
next prev parent reply other threads:[~2018-07-04 16:35 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 12:32 [PATCH 00/14] dma-jz4780 improvements Paul Cercueil
2018-07-03 12:32 ` [PATCH 01/14] dmaengine: dma-jz4780: Avoid hardcoding number of channels Paul Cercueil
2018-07-04 16:28 ` PrasannaKumar Muralidharan
2018-07-05 18:26 ` Paul Cercueil
2018-07-07 7:34 ` PrasannaKumar Muralidharan
2018-07-07 11:01 ` Paul Cercueil
2018-07-09 16:59 ` Vinod
2018-07-10 15:29 ` Paul Cercueil
2018-07-11 12:14 ` Vinod
2018-07-03 12:32 ` [PATCH 02/14] dmaengine: dma-jz4780: Separate chan/ctrl registers Paul Cercueil
2018-07-03 16:53 ` Paul Burton
2018-07-05 18:23 ` Paul Cercueil
2018-07-04 16:35 ` PrasannaKumar Muralidharan [this message]
2018-07-05 21:45 ` Paul Cercueil
2018-07-07 7:27 ` PrasannaKumar Muralidharan
2018-07-09 17:03 ` Vinod
2018-07-10 15:36 ` Paul Cercueil
2018-07-11 12:16 ` Vinod
2018-07-11 23:13 ` Paul Cercueil
2018-07-11 23:27 ` Paul Burton
2018-07-16 21:28 ` Rob Herring
2018-07-03 12:32 ` [PATCH 03/14] dmaengine: dma-jz4780: Use 4-word descriptors Paul Cercueil
2018-07-04 16:40 ` PrasannaKumar Muralidharan
2018-07-03 12:32 ` [PATCH 04/14] dmaengine: dma-jz4780: Add support for the JZ4770 SoC Paul Cercueil
2018-07-09 17:10 ` Vinod
2018-07-10 15:41 ` Paul Cercueil
2018-07-03 12:32 ` [PATCH 05/14] dmaengine: dma-jz4780: Add support for the JZ4740 SoC Paul Cercueil
2018-07-04 16:52 ` PrasannaKumar Muralidharan
2018-07-09 17:12 ` Vinod
2018-07-16 21:33 ` Rob Herring
2018-07-17 11:00 ` Paul Cercueil
2018-07-17 15:34 ` Vinod
2018-07-17 17:40 ` Rob Herring
2018-07-18 5:27 ` Vinod
2018-07-03 12:32 ` [PATCH 06/14] dmaengine: dma-jz4780: Add support for the JZ4725B SoC Paul Cercueil
2018-07-04 16:55 ` PrasannaKumar Muralidharan
2018-07-09 17:14 ` Vinod
2018-07-10 15:45 ` Paul Cercueil
2018-07-11 12:18 ` Vinod
2018-07-11 23:13 ` Paul Cercueil
2018-07-03 12:32 ` [PATCH 07/14] dmaengine: dma-jz4780: Enable Fast DMA to the AIC Paul Cercueil
2018-07-04 17:00 ` PrasannaKumar Muralidharan
2018-07-03 12:32 ` [PATCH 08/14] dmaengine: dma-jz4780: Add missing residue DTC mask Paul Cercueil
2018-07-03 12:32 ` [PATCH 09/14] dmaengine: dma-jz4780: Simplify jz4780_dma_desc_residue() Paul Cercueil
2018-07-03 12:32 ` [PATCH 10/14] dmaengine: dma-jz4780: Set DTCn register explicitly Paul Cercueil
2018-07-03 12:32 ` [PATCH 11/14] dmaengine: dma-jz4780: Further residue status fix Paul Cercueil
2018-07-03 12:32 ` [PATCH 12/14] dmaengine: dma-jz4780: Use dma_set_residue() Paul Cercueil
2018-07-03 12:32 ` [PATCH 13/14] MIPS: JZ4780: DTS: Update DMA node to match driver changes Paul Cercueil
2018-07-03 12:32 ` [PATCH 14/14] MIPS: JZ4770: DTS: Add DMA nodes Paul Cercueil
2018-07-03 19:32 ` [PATCH 00/14] dma-jz4780 improvements Mathieu Malaterre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANc+2y4dVDQoPP4zJkous=p-HYL+nu1Cxcrv0nqEMABN_4uyZw@mail.gmail.com' \
--to=prasannatsmkumar@gmail.com \
--cc=Zubair.Kakakhel@imgtec.com \
--cc=dansilsby@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=jhogan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=malat@debian.org \
--cc=mark.rutland@arm.com \
--cc=paul.burton@mips.com \
--cc=paul@crapouillou.net \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).