* [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware
@ 2025-07-15 18:56 Arseniy Velikanov
2025-07-15 19:11 ` Luka Panio
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Arseniy Velikanov @ 2025-07-15 18:56 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Luka Panio
Cc: linux-arm-msm, devicetree, linux-kernel,
~postmarketos/upstreaming, Arseniy Velikanov
PM8009 was erroneously added since this device doesn't actually have it.
It triggers a big critical error at boot, so we're drop it.
Also it looks like the fuel gauge is not connected to the battery,
it reports nonsense info. Downstream kernel uses pmic fg.
PMIC fuel-gauge driver uses mixed stats about dual-cell battery,
so I combined it into one.
Fixes: 264beb3cbd0d ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
Signed-off-by: Arseniy Velikanov <me@adomerle.pw>
---
.../boot/dts/qcom/sm8250-xiaomi-pipa.dts | 95 +------------------
1 file changed, 5 insertions(+), 90 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
index 668078ea4f04..b74c3c9b4076 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -50,18 +50,12 @@ framebuffer: framebuffer@9c000000 {
};
};
- battery_l: battery-l {
+ battery: battery {
compatible = "simple-battery";
- voltage-min-design-microvolt = <3870000>;
- energy-full-design-microwatt-hours = <16700000>;
- charge-full-design-microamp-hours = <4420000>;
- };
-
- battery_r: battery-r {
- compatible = "simple-battery";
- voltage-min-design-microvolt = <3870000>;
- energy-full-design-microwatt-hours = <16700000>;
- charge-full-design-microamp-hours = <4420000>;
+ charge-full-design-microamp-hours = <8840000>;
+ energy-full-design-microwatt-hours = <34300000>;
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4370000>;
};
bl_vddpos_5p5: bl-vddpos-regulator {
@@ -406,63 +400,6 @@ vreg_l11c_3p0: ldo11 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
-
- regulators-2 {
- compatible = "qcom,pm8009-rpmh-regulators";
- qcom,pmic-id = "f";
-
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vreg_bob>;
- vdd-l2-supply = <&vreg_s8c_1p35>;
- vdd-l5-l6-supply = <&vreg_bob>;
- vdd-l7-supply = <&vreg_s4a_1p8>;
-
- vreg_s1f_1p2: smps1 {
- regulator-name = "vreg_s1f_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s2f_0p5: smps2 {
- regulator-name = "vreg_s2f_0p5";
- regulator-min-microvolt = <512000>;
- regulator-max-microvolt = <1100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /* L1 is unused. */
-
- vreg_l2f_1p3: ldo2 {
- regulator-name = "vreg_l2f_1p3";
- regulator-min-microvolt = <1056000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /* L3 & L4 are unused. */
-
- vreg_l5f_2p8: ldo5 {
- regulator-name = "vreg_l5f_2p85";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l6f_2p8: ldo6 {
- regulator-name = "vreg_l6f_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7f_1p8: ldo7 {
- regulator-name = "vreg_l7f_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
};
&cdsp {
@@ -495,17 +432,6 @@ zap-shader {
};
};
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- fuel-gauge@55 {
- compatible = "ti,bq27z561";
- reg = <0x55>;
- monitored-battery = <&battery_r>;
- };
-};
-
&i2c11 {
clock-frequency = <400000>;
status = "okay";
@@ -523,17 +449,6 @@ backlight: backlight@11 {
};
};
-&i2c13 {
- clock-frequency = <400000>;
- status = "okay";
-
- fuel-gauge@55 {
- compatible = "ti,bq27z561";
- reg = <0x55>;
- monitored-battery = <&battery_l>;
- };
-};
-
&pcie0 {
status = "okay";
};
--
2.50.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware
2025-07-15 18:56 [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware Arseniy Velikanov
@ 2025-07-15 19:11 ` Luka Panio
2025-07-15 19:22 ` Dmitry Baryshkov
2025-07-15 19:31 ` Danila Tikhonov
2 siblings, 0 replies; 6+ messages in thread
From: Luka Panio @ 2025-07-15 19:11 UTC (permalink / raw)
To: Arseniy Velikanov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm,
devicetree, linux-kernel, ~postmarketos/upstreaming
Reviewed-by: Luka Panio lukapanio@gmail.com
On Tue, Jul 15, 2025 at 9:02 PM Arseniy Velikanov <me@adomerle.pw> wrote:
>
> PM8009 was erroneously added since this device doesn't actually have it.
> It triggers a big critical error at boot, so we're drop it.
>
> Also it looks like the fuel gauge is not connected to the battery,
> it reports nonsense info. Downstream kernel uses pmic fg.
>
> PMIC fuel-gauge driver uses mixed stats about dual-cell battery,
> so I combined it into one.
>
> Fixes: 264beb3cbd0d ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
>
> Signed-off-by: Arseniy Velikanov <me@adomerle.pw>
> ---
> .../boot/dts/qcom/sm8250-xiaomi-pipa.dts | 95 +------------------
> 1 file changed, 5 insertions(+), 90 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
> index 668078ea4f04..b74c3c9b4076 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
> @@ -50,18 +50,12 @@ framebuffer: framebuffer@9c000000 {
> };
> };
>
> - battery_l: battery-l {
> + battery: battery {
> compatible = "simple-battery";
> - voltage-min-design-microvolt = <3870000>;
> - energy-full-design-microwatt-hours = <16700000>;
> - charge-full-design-microamp-hours = <4420000>;
> - };
> -
> - battery_r: battery-r {
> - compatible = "simple-battery";
> - voltage-min-design-microvolt = <3870000>;
> - energy-full-design-microwatt-hours = <16700000>;
> - charge-full-design-microamp-hours = <4420000>;
> + charge-full-design-microamp-hours = <8840000>;
> + energy-full-design-microwatt-hours = <34300000>;
> + voltage-min-design-microvolt = <3400000>;
> + voltage-max-design-microvolt = <4370000>;
> };
>
> bl_vddpos_5p5: bl-vddpos-regulator {
> @@ -406,63 +400,6 @@ vreg_l11c_3p0: ldo11 {
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
> };
> -
> - regulators-2 {
> - compatible = "qcom,pm8009-rpmh-regulators";
> - qcom,pmic-id = "f";
> -
> - vdd-s1-supply = <&vph_pwr>;
> - vdd-s2-supply = <&vreg_bob>;
> - vdd-l2-supply = <&vreg_s8c_1p35>;
> - vdd-l5-l6-supply = <&vreg_bob>;
> - vdd-l7-supply = <&vreg_s4a_1p8>;
> -
> - vreg_s1f_1p2: smps1 {
> - regulator-name = "vreg_s1f_1p2";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - vreg_s2f_0p5: smps2 {
> - regulator-name = "vreg_s2f_0p5";
> - regulator-min-microvolt = <512000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - /* L1 is unused. */
> -
> - vreg_l2f_1p3: ldo2 {
> - regulator-name = "vreg_l2f_1p3";
> - regulator-min-microvolt = <1056000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - /* L3 & L4 are unused. */
> -
> - vreg_l5f_2p8: ldo5 {
> - regulator-name = "vreg_l5f_2p85";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - vreg_l6f_2p8: ldo6 {
> - regulator-name = "vreg_l6f_2p8";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - vreg_l7f_1p8: ldo7 {
> - regulator-name = "vreg_l7f_1p8";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> - };
> };
>
> &cdsp {
> @@ -495,17 +432,6 @@ zap-shader {
> };
> };
>
> -&i2c0 {
> - clock-frequency = <400000>;
> - status = "okay";
> -
> - fuel-gauge@55 {
> - compatible = "ti,bq27z561";
> - reg = <0x55>;
> - monitored-battery = <&battery_r>;
> - };
> -};
> -
> &i2c11 {
> clock-frequency = <400000>;
> status = "okay";
> @@ -523,17 +449,6 @@ backlight: backlight@11 {
> };
> };
>
> -&i2c13 {
> - clock-frequency = <400000>;
> - status = "okay";
> -
> - fuel-gauge@55 {
> - compatible = "ti,bq27z561";
> - reg = <0x55>;
> - monitored-battery = <&battery_l>;
> - };
> -};
> -
> &pcie0 {
> status = "okay";
> };
> --
> 2.50.0
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware
2025-07-15 18:56 [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware Arseniy Velikanov
2025-07-15 19:11 ` Luka Panio
@ 2025-07-15 19:22 ` Dmitry Baryshkov
2025-07-15 19:37 ` Arseniy Velikanov
2025-07-15 19:31 ` Danila Tikhonov
2 siblings, 1 reply; 6+ messages in thread
From: Dmitry Baryshkov @ 2025-07-15 19:22 UTC (permalink / raw)
To: Arseniy Velikanov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Luka Panio,
linux-arm-msm, devicetree, linux-kernel,
~postmarketos/upstreaming
On Tue, Jul 15, 2025 at 10:56:36PM +0400, Arseniy Velikanov wrote:
> PM8009 was erroneously added since this device doesn't actually have it.
> It triggers a big critical error at boot, so we're drop it.
Might it be that there are different SKUs?
>
> Also it looks like the fuel gauge is not connected to the battery,
> it reports nonsense info. Downstream kernel uses pmic fg.
Separate commit, please.
>
> PMIC fuel-gauge driver uses mixed stats about dual-cell battery,
> so I combined it into one.
>
> Fixes: 264beb3cbd0d ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
>
> Signed-off-by: Arseniy Velikanov <me@adomerle.pw>
Please remove empty line between tags (i.e. between Fixes and SoB).
> ---
> .../boot/dts/qcom/sm8250-xiaomi-pipa.dts | 95 +------------------
> 1 file changed, 5 insertions(+), 90 deletions(-)
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware
2025-07-15 19:22 ` Dmitry Baryshkov
@ 2025-07-15 19:37 ` Arseniy Velikanov
2025-07-15 21:21 ` Dmitry Baryshkov
0 siblings, 1 reply; 6+ messages in thread
From: Arseniy Velikanov @ 2025-07-15 19:37 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Luka Panio,
linux-arm-msm, devicetree, linux-kernel,
~postmarketos/upstreaming
On 15.07.2025 23:22, Dmitry Baryshkov wrote:
> On Tue, Jul 15, 2025 at 10:56:36PM +0400, Arseniy Velikanov wrote:
>> PM8009 was erroneously added since this device doesn't actually have it.
>> It triggers a big critical error at boot, so we're drop it.
> Might it be that there are different SKUs?
Well, while it's in dts, but it was disabled in the kernel config:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/pipa-t-oss/arch/arm64/configs/vendor/pipa_user_defconfig#L413
Maybe they just forgot to remove it from dts (I still don't understand
why it is displayed in i2cdetect though).
>
>> Also it looks like the fuel gauge is not connected to the battery,
>> it reports nonsense info. Downstream kernel uses pmic fg.
> Separate commit, please.
>
>> PMIC fuel-gauge driver uses mixed stats about dual-cell battery,
>> so I combined it into one.
>>
>> Fixes: 264beb3cbd0d ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
>>
>> Signed-off-by: Arseniy Velikanov <me@adomerle.pw>
> Please remove empty line between tags (i.e. between Fixes and SoB).
>
>> ---
>> .../boot/dts/qcom/sm8250-xiaomi-pipa.dts | 95 +------------------
>> 1 file changed, 5 insertions(+), 90 deletions(-)
>>
>
---
Kind regards,
Arseniy.
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware
2025-07-15 19:37 ` Arseniy Velikanov
@ 2025-07-15 21:21 ` Dmitry Baryshkov
0 siblings, 0 replies; 6+ messages in thread
From: Dmitry Baryshkov @ 2025-07-15 21:21 UTC (permalink / raw)
To: Arseniy Velikanov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Luka Panio,
linux-arm-msm, devicetree, linux-kernel,
~postmarketos/upstreaming
On Tue, 15 Jul 2025 at 22:37, Arseniy Velikanov <me@adomerle.pw> wrote:
>
>
> On 15.07.2025 23:22, Dmitry Baryshkov wrote:
> > On Tue, Jul 15, 2025 at 10:56:36PM +0400, Arseniy Velikanov wrote:
> >> PM8009 was erroneously added since this device doesn't actually have it.
> >> It triggers a big critical error at boot, so we're drop it.
> > Might it be that there are different SKUs?
> Well, while it's in dts, but it was disabled in the kernel config:
> https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/pipa-t-oss/arch/arm64/configs/vendor/pipa_user_defconfig#L413
>
> Maybe they just forgot to remove it from dts (I still don't understand
> why it is displayed in i2cdetect though).
For PMIC you can check in
/sys/kernel/debug/soc/qcom_socinfo/pmic_model_array. For FG it's not
possible.
> >
> >> Also it looks like the fuel gauge is not connected to the battery,
> >> it reports nonsense info. Downstream kernel uses pmic fg.
> > Separate commit, please.
> >
> >> PMIC fuel-gauge driver uses mixed stats about dual-cell battery,
> >> so I combined it into one.
> >>
> >> Fixes: 264beb3cbd0d ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
> >>
> >> Signed-off-by: Arseniy Velikanov <me@adomerle.pw>
> > Please remove empty line between tags (i.e. between Fixes and SoB).
> >
> >> ---
> >> .../boot/dts/qcom/sm8250-xiaomi-pipa.dts | 95 +------------------
> >> 1 file changed, 5 insertions(+), 90 deletions(-)
> >>
> >
> ---
> Kind regards,
> Arseniy.
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware
2025-07-15 18:56 [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware Arseniy Velikanov
2025-07-15 19:11 ` Luka Panio
2025-07-15 19:22 ` Dmitry Baryshkov
@ 2025-07-15 19:31 ` Danila Tikhonov
2 siblings, 0 replies; 6+ messages in thread
From: Danila Tikhonov @ 2025-07-15 19:31 UTC (permalink / raw)
To: Arseniy Velikanov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Luka Panio,
linux-arm-msm, devicetree, linux-kernel,
~postmarketos/upstreaming
On 7/15/25 21:56, Arseniy Velikanov wrote:
> PM8009 was erroneously added since this device doesn't actually have it.
> It triggers a big critical error at boot, so we're drop it.
>
> Also it looks like the fuel gauge is not connected to the battery,
> it reports nonsense info. Downstream kernel uses pmic fg.
>
> PMIC fuel-gauge driver uses mixed stats about dual-cell battery,
> so I combined it into one.
>
> Fixes: 264beb3cbd0d ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
>
> Signed-off-by: Arseniy Velikanov <me@adomerle.pw>
> ---
> .../boot/dts/qcom/sm8250-xiaomi-pipa.dts | 95 +------------------
> 1 file changed, 5 insertions(+), 90 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
> index 668078ea4f04..b74c3c9b4076 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
> @@ -50,18 +50,12 @@ framebuffer: framebuffer@9c000000 {
> };
> };
>
> - battery_l: battery-l {
> + battery: battery {
> compatible = "simple-battery";
> - voltage-min-design-microvolt = <3870000>;
> - energy-full-design-microwatt-hours = <16700000>;
> - charge-full-design-microamp-hours = <4420000>;
> - };
> -
> - battery_r: battery-r {
> - compatible = "simple-battery";
> - voltage-min-design-microvolt = <3870000>;
> - energy-full-design-microwatt-hours = <16700000>;
> - charge-full-design-microamp-hours = <4420000>;
> + charge-full-design-microamp-hours = <8840000>;
> + energy-full-design-microwatt-hours = <34300000>;
> + voltage-min-design-microvolt = <3400000>;
> + voltage-max-design-microvolt = <4370000>;
> };
>
> bl_vddpos_5p5: bl-vddpos-regulator {
> @@ -406,63 +400,6 @@ vreg_l11c_3p0: ldo11 {
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
> };
> -
> - regulators-2 {
> - compatible = "qcom,pm8009-rpmh-regulators";
Thanks for the patch.
Please remove the extra pm8009.dtsi include too.
> - qcom,pmic-id = "f";
> -
> - vdd-s1-supply = <&vph_pwr>;
> - vdd-s2-supply = <&vreg_bob>;
> - vdd-l2-supply = <&vreg_s8c_1p35>;
> - vdd-l5-l6-supply = <&vreg_bob>;
> - vdd-l7-supply = <&vreg_s4a_1p8>;
> -
> - vreg_s1f_1p2: smps1 {
> - regulator-name = "vreg_s1f_1p2";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - vreg_s2f_0p5: smps2 {
> - regulator-name = "vreg_s2f_0p5";
> - regulator-min-microvolt = <512000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - /* L1 is unused. */
> -
> - vreg_l2f_1p3: ldo2 {
> - regulator-name = "vreg_l2f_1p3";
> - regulator-min-microvolt = <1056000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - /* L3 & L4 are unused. */
> -
> - vreg_l5f_2p8: ldo5 {
> - regulator-name = "vreg_l5f_2p85";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - vreg_l6f_2p8: ldo6 {
> - regulator-name = "vreg_l6f_2p8";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> -
> - vreg_l7f_1p8: ldo7 {
> - regulator-name = "vreg_l7f_1p8";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - };
> - };
> };
>
> &cdsp {
> @@ -495,17 +432,6 @@ zap-shader {
> };
> };
>
> -&i2c0 {
> - clock-frequency = <400000>;
> - status = "okay";
> -
> - fuel-gauge@55 {
> - compatible = "ti,bq27z561";
> - reg = <0x55>;
> - monitored-battery = <&battery_r>;
> - };
> -};
> -
> &i2c11 {
> clock-frequency = <400000>;
> status = "okay";
> @@ -523,17 +449,6 @@ backlight: backlight@11 {
> };
> };
>
> -&i2c13 {
> - clock-frequency = <400000>;
> - status = "okay";
> -
> - fuel-gauge@55 {
> - compatible = "ti,bq27z561";
> - reg = <0x55>;
> - monitored-battery = <&battery_l>;
> - };
> -};
> -
> &pcie0 {
> status = "okay";
> };
---
Best wishes
Danila
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2025-07-15 21:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-07-15 18:56 [PATCH v1] arm64: dts: qcom: sm8250-xiaomi-pipa: Drop nonexistent hardware Arseniy Velikanov
2025-07-15 19:11 ` Luka Panio
2025-07-15 19:22 ` Dmitry Baryshkov
2025-07-15 19:37 ` Arseniy Velikanov
2025-07-15 21:21 ` Dmitry Baryshkov
2025-07-15 19:31 ` Danila Tikhonov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).