From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Subject: Re: [PATCH v3 2/2] ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin Date: Mon, 21 Jan 2019 08:33:31 -0200 Message-ID: References: <20190121095705.27452-1-martyn.welch@collabora.com> <20190121095705.27452-2-martyn.welch@collabora.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <20190121095705.27452-2-martyn.welch@collabora.com> Sender: linux-kernel-owner@vger.kernel.org To: Martyn Welch Cc: Shawn Guo , Sascha Hauer , Rob Herring , Mark Rutland , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , =?UTF-8?Q?Stefan_Riedm=C3=BCller?= , linux-kernel , NXP Linux Team , Pengutronix Kernel Team , Christian Hemp , Fabio Estevam , "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" List-Id: devicetree@vger.kernel.org On Mon, Jan 21, 2019 at 7:57 AM Martyn Welch wrote: > > The Phytec phyBOARD Segin is i.MX6 based SBC, available with either an > i.MX6UL or i.MX6ULL SOM and various add-on boards. > > The following adds support for the "Full Featured" version of the Segin, > which is provided with the i.MX6UL SOM and the PEB-EVAL-01 evaluation > module. > > Its hardware specifications are: > > * 512MB DDR3 memory > * 512MB NAND flash > * Dual 10/100 Ethernet > * USB Host and USB OTG > * RS232 > * MicroSD external storage > * Audio, RS232, I2C, SPI, CAN headers > * Further I/O options via A/V and Expansion headers > > Signed-off-by: Martyn Welch Reviewed-by: Fabio Estevam