From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Subject: Re: [PATCH V2 2/4] ARM: dts: imx6qdl-sabresd: add light sensor support Date: Wed, 5 Dec 2018 23:48:24 -0200 Message-ID: References: <1544060203-22163-1-git-send-email-Anson.Huang@nxp.com> <1544060203-22163-2-git-send-email-Anson.Huang@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <1544060203-22163-2-git-send-email-Anson.Huang@nxp.com> Sender: linux-kernel-owner@vger.kernel.org To: Yongcai Huang Cc: Shawn Guo , Sascha Hauer , Sascha Hauer , Fabio Estevam , Rob Herring , Mark Rutland , "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , linux-kernel , NXP Linux Team List-Id: devicetree@vger.kernel.org On Wed, Dec 5, 2018 at 11:43 PM Anson Huang wrote: > > Add isl29023 light sensor support on i2c3 bus, the light > sensor's power is controlled by a fixed regulator, since > the isl29023 driver and most of other sensors on same > board like mag3110 and mma8451 do NOT support regulator > operation currently, they are all controlled by this > regulator, so this patch also adds the fixed regulator > support and make it always on. > > Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam