From: Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 9/9] ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support
Date: Sat, 16 Dec 2017 12:09:07 -0200 [thread overview]
Message-ID: <CAOMZO5Dv5dRbbHeqMtitXaHjJbMF4nGQWg0dpyHu0hh+2TaxGA@mail.gmail.com> (raw)
In-Reply-To: <20171206153005.6144-9-stefan-XLVq0VzYD2Y@public.gmane.org>
On Wed, Dec 6, 2017 at 1:30 PM, Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org> wrote:
> diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
> new file mode 100644
> index 000000000000..5d5bb4c2843f
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
> @@ -0,0 +1,55 @@
> +/*
> + * Copyright 2017 Toradex AG
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
Patch looks good.
Just a comment: people have been starting to use SPDX license identifiers.
This would really make all this huge license text much shorter :-)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-16 14:09 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-06 15:29 [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Stefan Agner
2017-12-06 15:29 ` [PATCH 2/9] ARM: dts: imx7-colibri: make sure multiplexed pins are not active Stefan Agner
[not found] ` <20171206153005.6144-2-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:01 ` Fabio Estevam
[not found] ` <CAOMZO5AD6bDEMStEWY8hRG_8gh0RAD_66zboTsKd-cFkPtiLKg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-17 20:02 ` Stefan Agner
2017-12-06 15:29 ` [PATCH 3/9] ARM: dts: imx7-colibri: mux pull-ups where appropriate Stefan Agner
[not found] ` <20171206153005.6144-3-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:02 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 4/9] ARM: dts: imx7-colibri: use NAND_CE1 as GPIO Stefan Agner
[not found] ` <20171206153005.6144-4-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:02 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 5/9] ARM: dts: imx7-colibri: specify cpu-supply Stefan Agner
[not found] ` <20171206153005.6144-5-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 13:59 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 7/9] ARM: dts: imx7-colibri: specify backlight GPIO Stefan Agner
[not found] ` <20171206153005.6144-7-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:03 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 8/9] ARM: dts: imx7-colibri: add MCP2515 CAN controller Stefan Agner
2017-12-07 8:59 ` Stefan Agner
[not found] ` <20171206153005.6144-8-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:05 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 9/9] ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support Stefan Agner
[not found] ` <20171206153005.6144-9-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:09 ` Fabio Estevam [this message]
[not found] ` <CAOMZO5Dv5dRbbHeqMtitXaHjJbMF4nGQWg0dpyHu0hh+2TaxGA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-16 14:18 ` Philippe Ombredanne
[not found] ` <20171206153005.6144-1-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-06 15:30 ` [PATCH 6/9] ARM: dts: imx7-colibri: specify usdhc1 supplies Stefan Agner
[not found] ` <20171206153005.6144-6-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:03 ` Fabio Estevam
2017-12-16 14:00 ` [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAOMZO5Dv5dRbbHeqMtitXaHjJbMF4nGQWg0dpyHu0hh+2TaxGA@mail.gmail.com \
--to=festevam-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=stefan-XLVq0VzYD2Y@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).