[PATCH v5 0/5] Add LVTS support for mt8192

[PATCH v5 0/5] Add LVTS support for mt8192

[Bernhard Rosenkränzer]

From: Bernhard Rosenkränzer <bero@baylibre.com>

Add full LVTS support (MCU thermal domain + AP thermal domain) to MediaTek MT8192 SoC.
Also, add Suspend and Resume support to LVTS Driver (all SoCs),
and update the documentation that describes the Calibration Data Offsets.

v5 changes are a lot smaller than originally assumed -- commit
185673ca71d3f7e9c7d62ee5084348e084352e56 fixed the issue I
was originally planning to work around in this patchset,
so what remains for v5 is noirq and cosmetics.

Changelog:
   v5 :
        - Suspend/Resume in noirq stage
	- Reorder chipset specific functions
        - Rebased :
            base-commit: 4d5ab2376ec576af173e5eac3887ed0b51bd8566

   v4 :
        - Shrink the lvts_ap thermal sensor I/O range to 0xc00 to make
          room for SVS support, pointed out by
          AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

    v3 :
        - Rebased :
            base-commit: 6a3d37b4d885129561e1cef361216f00472f7d2e
        - Fix issues in v2 pointed out by Nícolas F. R. A. Prado <nfraprado@collabora.com>:
          Use filtered mode to make sure threshold interrupts are triggered,
          protocol documentation, cosmetics
        - I (bero@baylibre.com) will be taking care of this patchset
          from now on, since Balsam has left BayLibre. Thanks for
          getting it almost ready, Balsam!

    v2 :
        - Based on top of thermal/linux-next :
            base-commit: 7ac82227ee046f8234471de4c12a40b8c2d3ddcc
        - Squash "add thermal zones and thermal nodes" and
            "add temperature mitigation threshold" commits together to form
            "arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones" commit.
        - Add Suspend and Resume support to LVTS Driver.
        - Update Calibration Data documentation.
        - Fix calibration data offsets for mt8192
            (Thanks to "Chen-Yu Tsai" and "Nícolas F. R. A. Prado").
        https://lore.kernel.org/all/20230425133052.199767-1-bchihi@baylibre.com/
        Tested-by: Chen-Yu Tsai <wenst@chromium.org>

    v1 :
        - The initial series "Add LVTS support for mt8192" :
            "https://lore.kernel.org/all/20230307163413.143334-1-bchihi@baylibre.com/".

Balsam CHIHI (5):
  dt-bindings: thermal: mediatek: Add LVTS thermal controller definition
    for mt8192
  thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
  thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
  arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
  thermal/drivers/mediatek/lvts_thermal: Update calibration data
    documentation

 arch/arm64/boot/dts/mediatek/mt8192.dtsi      | 454 ++++++++++++++++++
 drivers/thermal/mediatek/lvts_thermal.c       | 163 ++++++-
 .../thermal/mediatek,lvts-thermal.h           |  19 +
 3 files changed, 634 insertions(+), 2 deletions(-)

-- 
2.42.0

[PATCH v5 0/5] Add LVTS support for mt8192

[Bernhard Rosenkränzer]

Add full LVTS support (MCU thermal domain + AP thermal domain) to MediaTek MT8192 SoC.
Also, add Suspend and Resume support to LVTS Driver (all SoCs),
and update the documentation that describes the Calibration Data Offsets.

v5 changes are a lot smaller than originally assumed -- commit
185673ca71d3f7e9c7d62ee5084348e084352e56 fixed the issue I
was originally planning to work around in this patchset,
so what remains for v5 is noirq and cosmetics.

Changelog:
   v5 :
        - Suspend/Resume in noirq stage
	- Reorder chipset specific functions
        - Rebased :
            base-commit: 4d5ab2376ec576af173e5eac3887ed0b51bd8566

   v4 :
        - Shrink the lvts_ap thermal sensor I/O range to 0xc00 to make
          room for SVS support, pointed out by
          AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

    v3 :
        - Rebased :
            base-commit: 6a3d37b4d885129561e1cef361216f00472f7d2e
        - Fix issues in v2 pointed out by Nícolas F. R. A. Prado <nfraprado@collabora.com>:
          Use filtered mode to make sure threshold interrupts are triggered,
          protocol documentation, cosmetics
        - I (bero@baylibre.com) will be taking care of this patchset
          from now on, since Balsam has left BayLibre. Thanks for
          getting it almost ready, Balsam!

    v2 :
        - Based on top of thermal/linux-next :
            base-commit: 7ac82227ee046f8234471de4c12a40b8c2d3ddcc
        - Squash "add thermal zones and thermal nodes" and
            "add temperature mitigation threshold" commits together to form
            "arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones" commit.
        - Add Suspend and Resume support to LVTS Driver.
        - Update Calibration Data documentation.
        - Fix calibration data offsets for mt8192
            (Thanks to "Chen-Yu Tsai" and "Nícolas F. R. A. Prado").
        https://lore.kernel.org/all/20230425133052.199767-1-bchihi@baylibre.com/
        Tested-by: Chen-Yu Tsai <wenst@chromium.org>

    v1 :
        - The initial series "Add LVTS support for mt8192" :
            "https://lore.kernel.org/all/20230307163413.143334-1-bchihi@baylibre.com/".

Balsam CHIHI (5):
  dt-bindings: thermal: mediatek: Add LVTS thermal controller definition
    for mt8192
  thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
  thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
  arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
  thermal/drivers/mediatek/lvts_thermal: Update calibration data
    documentation

 arch/arm64/boot/dts/mediatek/mt8192.dtsi      | 454 ++++++++++++++++++
 drivers/thermal/mediatek/lvts_thermal.c       | 163 ++++++-
 .../thermal/mediatek,lvts-thermal.h           |  19 +
 3 files changed, 634 insertions(+), 2 deletions(-)

-- 
2.42.0

[PATCH v5 1/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192

[Bernhard Rosenkränzer]

From: Balsam CHIHI <bchihi@baylibre.com>

Add LVTS thermal controller definition for MT8192.

Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 .../thermal/mediatek,lvts-thermal.h           | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 8fa5a46675c46..5e9eb62174268 100644
--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -26,4 +26,23 @@
 #define MT8195_AP_CAM0  15
 #define MT8195_AP_CAM1  16
 
+#define MT8192_MCU_BIG_CPU0     0
+#define MT8192_MCU_BIG_CPU1     1
+#define MT8192_MCU_BIG_CPU2     2
+#define MT8192_MCU_BIG_CPU3     3
+#define MT8192_MCU_LITTLE_CPU0  4
+#define MT8192_MCU_LITTLE_CPU1  5
+#define MT8192_MCU_LITTLE_CPU2  6
+#define MT8192_MCU_LITTLE_CPU3  7
+
+#define MT8192_AP_VPU0  8
+#define MT8192_AP_VPU1  9
+#define MT8192_AP_GPU0  10
+#define MT8192_AP_GPU1  11
+#define MT8192_AP_INFRA 12
+#define MT8192_AP_CAM   13
+#define MT8192_AP_MD0   14
+#define MT8192_AP_MD1   15
+#define MT8192_AP_MD2   16
+
 #endif /* __MEDIATEK_LVTS_DT_H */
-- 
2.42.0

[PATCH v5 2/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume

[Bernhard Rosenkränzer]

From: Balsam CHIHI <bchihi@baylibre.com>

Add suspend and resume support to LVTS driver.

Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
[bero@baylibre.com: suspend/resume in noirq phase]
Co-developed-by: Bernhard Rosenkränzer <bero@baylibre.com>
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 drivers/thermal/mediatek/lvts_thermal.c | 37 +++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 877a0e5ac3fd3..c5a03bdf63e9d 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -1254,6 +1254,38 @@ static void lvts_remove(struct platform_device *pdev)
 	lvts_debugfs_exit(lvts_td);
 }
 
+static int lvts_suspend(struct device *dev)
+{
+	struct lvts_domain *lvts_td;
+	int i;
+
+	lvts_td = dev_get_drvdata(dev);
+
+	for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
+		lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false);
+
+	clk_disable_unprepare(lvts_td->clk);
+
+	return 0;
+}
+
+static int lvts_resume(struct device *dev)
+{
+	struct lvts_domain *lvts_td;
+	int i, ret;
+
+	lvts_td = dev_get_drvdata(dev);
+
+	ret = clk_prepare_enable(lvts_td->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
+		lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], true);
+
+	return 0;
+}
+
 static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
 		.cal_offset = { 0x04, 0x07 },
@@ -1350,12 +1382,17 @@ static const struct of_device_id lvts_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, lvts_of_match);
 
+static const struct dev_pm_ops lvts_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(lvts_suspend, lvts_resume)
+};
+
 static struct platform_driver lvts_driver = {
 	.probe = lvts_probe,
 	.remove_new = lvts_remove,
 	.driver = {
 		.name = "mtk-lvts-thermal",
 		.of_match_table = lvts_of_match,
+		.pm = &lvts_pm_ops,
 	},
 };
 module_platform_driver(lvts_driver);
-- 
2.42.0

[PATCH v5 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support

[Bernhard Rosenkränzer]

From: Balsam CHIHI <bchihi@baylibre.com>

Add LVTS Driver support for MT8192.

Co-developed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[bero@baylibre.com: cosmetic changes, rebase]
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 drivers/thermal/mediatek/lvts_thermal.c | 95 +++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index c5a03bdf63e9d..487401424951d 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -89,6 +89,7 @@
 #define LVTS_MSR_READ_TIMEOUT_US	400
 #define LVTS_MSR_READ_WAIT_US		(LVTS_MSR_READ_TIMEOUT_US / 2)
 
+#define LVTS_HW_SHUTDOWN_MT8192		105000
 #define LVTS_HW_SHUTDOWN_MT8195		105000
 
 #define LVTS_MINIMUM_THRESHOLD		20000
@@ -1286,6 +1287,88 @@ static int lvts_resume(struct device *dev)
 	return 0;
 }
 
+static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
+	{
+		.cal_offset = { 0x04, 0x08 },
+		.lvts_sensor = {
+			{ .dt_id = MT8192_MCU_BIG_CPU0 },
+			{ .dt_id = MT8192_MCU_BIG_CPU1 }
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x0,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	},
+	{
+		.cal_offset = { 0x0c, 0x10 },
+		.lvts_sensor = {
+			{ .dt_id = MT8192_MCU_BIG_CPU2 },
+			{ .dt_id = MT8192_MCU_BIG_CPU3 }
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x100,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	},
+	{
+		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
+		.lvts_sensor = {
+			{ .dt_id = MT8192_MCU_LITTLE_CPU0 },
+			{ .dt_id = MT8192_MCU_LITTLE_CPU1 },
+			{ .dt_id = MT8192_MCU_LITTLE_CPU2 },
+			{ .dt_id = MT8192_MCU_LITTLE_CPU3 }
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x200,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	}
+};
+
+static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
+		{
+		.cal_offset = { 0x24, 0x28 },
+		.lvts_sensor = {
+			{ .dt_id = MT8192_AP_VPU0 },
+			{ .dt_id = MT8192_AP_VPU1 }
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x0,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+	},
+	{
+		.cal_offset = { 0x2c, 0x30 },
+		.lvts_sensor = {
+			{ .dt_id = MT8192_AP_GPU0 },
+			{ .dt_id = MT8192_AP_GPU1 }
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x100,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+	},
+	{
+		.cal_offset = { 0x34, 0x38 },
+		.lvts_sensor = {
+			{ .dt_id = MT8192_AP_INFRA },
+			{ .dt_id = MT8192_AP_CAM },
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x200,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+	},
+	{
+		.cal_offset = { 0x3c, 0x40, 0x44 },
+		.lvts_sensor = {
+			{ .dt_id = MT8192_AP_MD0 },
+			{ .dt_id = MT8192_AP_MD1 },
+			{ .dt_id = MT8192_AP_MD2 }
+		},
+		.num_lvts_sensor = 3,
+		.offset = 0x300,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
+	}
+};
+
 static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
 		.cal_offset = { 0x04, 0x07 },
@@ -1365,6 +1448,16 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
 	}
 };
 
+static const struct lvts_data mt8192_lvts_mcu_data = {
+	.lvts_ctrl	= mt8192_lvts_mcu_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt8192_lvts_mcu_data_ctrl),
+};
+
+static const struct lvts_data mt8192_lvts_ap_data = {
+	.lvts_ctrl	= mt8192_lvts_ap_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt8192_lvts_ap_data_ctrl),
+};
+
 static const struct lvts_data mt8195_lvts_mcu_data = {
 	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
@@ -1376,6 +1469,8 @@ static const struct lvts_data mt8195_lvts_ap_data = {
 };
 
 static const struct of_device_id lvts_of_match[] = {
+	{ .compatible = "mediatek,mt8192-lvts-mcu", .data = &mt8192_lvts_mcu_data },
+	{ .compatible = "mediatek,mt8192-lvts-ap", .data = &mt8192_lvts_ap_data },
 	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
 	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
 	{},
-- 
2.42.0

[PATCH v5 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones

[Bernhard Rosenkränzer]

From: Balsam CHIHI <bchihi@baylibre.com>

Add thermal nodes and thermal zones for the mt8192.

The mt8192 SoC has several hotspots around the CPUs.
Specify the targeted temperature threshold to apply the mitigation
and define the associated cooling devices.

Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[bero@baylibre.com: cosmetic changes, reduce lvts_ap size]
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 454 +++++++++++++++++++++++
 1 file changed, 454 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5dbbf..238f6eb258323 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
 #include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -72,6 +74,7 @@ cpu0: cpu@0 {
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -90,6 +93,7 @@ cpu1: cpu@100 {
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -108,6 +112,7 @@ cpu2: cpu@200 {
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -126,6 +131,7 @@ cpu3: cpu@300 {
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -144,6 +150,7 @@ cpu4: cpu@400 {
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -162,6 +169,7 @@ cpu5: cpu@500 {
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -180,6 +188,7 @@ cpu6: cpu@600 {
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -198,6 +207,7 @@ cpu7: cpu@700 {
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu-map {
@@ -788,6 +798,17 @@ spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8192-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1114,6 +1135,17 @@ nor_flash: spi@11234000 {
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8192-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		efuse: efuse@11c10000 {
 			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
 			reg = <0 0x11c10000 0 0x1000>;
@@ -1899,4 +1931,426 @@ larb2: larb@1f002000 {
 			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+			trips {
+				cam_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+			trips {
+				md0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+			trips {
+				md2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
-- 
2.42.0

[PATCH v5 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation

[Bernhard Rosenkränzer]

From: Balsam CHIHI <bchihi@baylibre.com>

Update LVTS calibration data documentation for mt8192 and mt8195.

Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[bero@baylibre.com: Fix issues pointed out by Nícolas F. R. A. Prado <nfraprado@collabora.com>]
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 drivers/thermal/mediatek/lvts_thermal.c | 31 +++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 487401424951d..15fcf573f5cc5 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -604,7 +604,34 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
  * The efuse blob values follows the sensor enumeration per thermal
  * controller. The decoding of the stream is as follow:
  *
- * stream index map for MCU Domain :
+ * MT8192 :
+ * Stream index map for MCU Domain mt8192 :
+ *
+ * <-----mcu-tc#0-----> <-----sensor#0----->        <-----sensor#1----->
+ *  0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B
+ *
+ * <-----sensor#2----->        <-----sensor#3----->
+ *  0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 | 0x13
+ *
+ * <-----sensor#4----->        <-----sensor#5----->        <-----sensor#6----->        <-----sensor#7----->
+ *  0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 | 0x22 | 0x23
+ *
+ * Stream index map for AP Domain mt8192 :
+ *
+ * <-----sensor#0----->        <-----sensor#1----->
+ *  0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A | 0x2B
+ *
+ * <-----sensor#2----->        <-----sensor#3----->
+ *  0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
+ *
+ * <-----sensor#4----->        <-----sensor#5----->
+ *  0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B
+ *
+ * <-----sensor#6----->        <-----sensor#7----->        <-----sensor#8----->
+ *  0x3C | 0x3D | 0x3E | 0x3F | 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47
+ *
+ * MT8195 :
+ * Stream index map for MCU Domain mt8195 :
  *
  * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
  *  0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
@@ -615,7 +642,7 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
  * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
  *  0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
  *
- * stream index map for AP Domain :
+ * Stream index map for AP Domain mt8195 :
  *
  * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1----->
  *  0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
-- 
2.42.0

Re: [PATCH v5 0/5] Add LVTS support for mt8192

[Chen-Yu Tsai]

Hi,

On Tue, Oct 17, 2023 at 12:05 PM Bernhard Rosenkränzer
<bero@baylibre.com> wrote:
>
> Add full LVTS support (MCU thermal domain + AP thermal domain) to MediaTek MT8192 SoC.
> Also, add Suspend and Resume support to LVTS Driver (all SoCs),
> and update the documentation that describes the Calibration Data Offsets.
>
> v5 changes are a lot smaller than originally assumed -- commit
> 185673ca71d3f7e9c7d62ee5084348e084352e56 fixed the issue I
> was originally planning to work around in this patchset,
> so what remains for v5 is noirq and cosmetics.

I see two series in my inbox and on the mailing list. Which one is the
correct one?

Thanks
ChenYu

> Changelog:
>    v5 :
>         - Suspend/Resume in noirq stage
>         - Reorder chipset specific functions
>         - Rebased :
>             base-commit: 4d5ab2376ec576af173e5eac3887ed0b51bd8566
>
>    v4 :
>         - Shrink the lvts_ap thermal sensor I/O range to 0xc00 to make
>           room for SVS support, pointed out by
>           AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>
>     v3 :
>         - Rebased :
>             base-commit: 6a3d37b4d885129561e1cef361216f00472f7d2e
>         - Fix issues in v2 pointed out by Nícolas F. R. A. Prado <nfraprado@collabora.com>:
>           Use filtered mode to make sure threshold interrupts are triggered,
>           protocol documentation, cosmetics
>         - I (bero@baylibre.com) will be taking care of this patchset
>           from now on, since Balsam has left BayLibre. Thanks for
>           getting it almost ready, Balsam!
>
>     v2 :
>         - Based on top of thermal/linux-next :
>             base-commit: 7ac82227ee046f8234471de4c12a40b8c2d3ddcc
>         - Squash "add thermal zones and thermal nodes" and
>             "add temperature mitigation threshold" commits together to form
>             "arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones" commit.
>         - Add Suspend and Resume support to LVTS Driver.
>         - Update Calibration Data documentation.
>         - Fix calibration data offsets for mt8192
>             (Thanks to "Chen-Yu Tsai" and "Nícolas F. R. A. Prado").
>         https://lore.kernel.org/all/20230425133052.199767-1-bchihi@baylibre.com/
>         Tested-by: Chen-Yu Tsai <wenst@chromium.org>
>
>     v1 :
>         - The initial series "Add LVTS support for mt8192" :
>             "https://lore.kernel.org/all/20230307163413.143334-1-bchihi@baylibre.com/".
>
> Balsam CHIHI (5):
>   dt-bindings: thermal: mediatek: Add LVTS thermal controller definition
>     for mt8192
>   thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
>   thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
>   arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
>   thermal/drivers/mediatek/lvts_thermal: Update calibration data
>     documentation
>
>  arch/arm64/boot/dts/mediatek/mt8192.dtsi      | 454 ++++++++++++++++++
>  drivers/thermal/mediatek/lvts_thermal.c       | 163 ++++++-
>  .../thermal/mediatek,lvts-thermal.h           |  19 +
>  3 files changed, 634 insertions(+), 2 deletions(-)
>
> --
> 2.42.0

Re: [PATCH v5 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones

[AngeloGioacchino Del Regno]

Il 17/10/23 21:05, Bernhard Rosenkränzer ha scritto:
> From: Balsam CHIHI <bchihi@baylibre.com>
> 
> Add thermal nodes and thermal zones for the mt8192.
> 
> The mt8192 SoC has several hotspots around the CPUs.
> Specify the targeted temperature threshold to apply the mitigation
> and define the associated cooling devices.
> 
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> [bero@baylibre.com: cosmetic changes, reduce lvts_ap size]
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v5 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support

[AngeloGioacchino Del Regno]

Il 17/10/23 21:05, Bernhard Rosenkränzer ha scritto:
> From: Balsam CHIHI <bchihi@baylibre.com>
> 
> Add LVTS Driver support for MT8192.
> 
> Co-developed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> [bero@baylibre.com: cosmetic changes, rebase]
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v5 2/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume

[AngeloGioacchino Del Regno]

Il 17/10/23 21:05, Bernhard Rosenkränzer ha scritto:
> From: Balsam CHIHI <bchihi@baylibre.com>
> 
> Add suspend and resume support to LVTS driver.
> 
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> [bero@baylibre.com: suspend/resume in noirq phase]
> Co-developed-by: Bernhard Rosenkränzer <bero@baylibre.com>
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v5 0/5] Add LVTS support for mt8192

[Bernhard Rosenkränzer]

Hi,

On Wed, 18 Oct 2023 at 02:07, Chen-Yu Tsai <wenst@chromium.org> wrote:
>
> I see two series in my inbox and on the mailing list. Which one is the
> correct one?

They're identical except I accidentally sent them out using my private
email (that happens to be on a mail server hosted on my DSL line, so a
number of MLs drop it because of dialup blacklists) first. I resent it
using my work email when the error messages about that started
flooding my inbox. Sorry about the confusion - but code wise it
doesn't matter, v5 is v5.

ttyl
bero

Re: [PATCH v5 0/5] Add LVTS support for mt8192

[Daniel Lezcano]

On 17/10/2023 21:05, Bernhard Rosenkränzer wrote:
> Add full LVTS support (MCU thermal domain + AP thermal domain) to MediaTek MT8192 SoC.
> Also, add Suspend and Resume support to LVTS Driver (all SoCs),
> and update the documentation that describes the Calibration Data Offsets.

Applied patches 1,2,3 and 5, letting the patch 4 to go through the 
Mediatek tree

Thanks

   -- Daniel

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog