From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Hansson Subject: Re: [PATCH v2] ARM64: dts: meson-axg: enable the eMMC controller Date: Fri, 20 Apr 2018 08:55:47 +0200 Message-ID: References: <20180408113647.13543-1-yixun.lan@amlogic.com> <7ho9if3wo3.fsf@baylibre.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <7ho9if3wo3.fsf@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: Kevin Hilman Cc: Yixun Lan , Rob Herring , devicetree@vger.kernel.org, "linux-mmc@vger.kernel.org" , Nan Li , Linux Kernel Mailing List , Carlo Caione , "open list:ARM/Amlogic Meson..." , Jerome Brunet , Linux ARM , Heiner Kallweit List-Id: devicetree@vger.kernel.org On 19 April 2018 at 19:58, Kevin Hilman wrote: > Yixun Lan writes: > >> From: Nan Li >> >> The IP of eMMC controller in AXG is similiar to Meson-GX series. >> Here we add the initial support of the HS200 mode with >> clock running at 166MHz (to be safe), since we found some eMMC chip >> fail to run at 200MHz due to tunning phase error. >> >> Signed-off-by: Nan Li >> Signed-off-by: Yixun Lan > > Applied to v4.18/dt64 > >> --- >> Hi Kevin >> Please note this patch actually depend on the eMMC driver here [0]. >> Still a few problem to solve, to improve the tuning phase driver to make >> the clock running at 200MHz, and to further support the HS400 mode. >> Anyway, this patch itself is quite independent. > > The driver changes are queued for v4.18 also. Good! Right, may I consider that as an ack? :-) Kind regards Uffe > > Kevin > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel