devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ulf Hansson <ulf.hansson@linaro.org>
To: Ludovic Barre <ludovic.Barre@st.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	DTML <devicetree@vger.kernel.org>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH V3 1/2] mmc: mmci: add variant property to set command stop bit
Date: Tue, 11 Dec 2018 10:47:07 +0100	[thread overview]
Message-ID: <CAPDyKFq7TZMKWMqmoDR0yfr2N2cf2nr4-BuEs5DPgJSGy-nvAA@mail.gmail.com> (raw)
In-Reply-To: <1544109212-12621-2-git-send-email-ludovic.Barre@st.com>

On Thu, 6 Dec 2018 at 16:13, Ludovic Barre <ludovic.Barre@st.com> wrote:
>
> From: Ludovic Barre <ludovic.barre@st.com>
>
> On cmd12 (STOP_TRANSMISSION), STM32 sdmmc variant needs to set
> cmdstop bit in command register. The CPSM ("Command Path State Machine")
> treats the command as a Stop Transmission command and signals
> abort to the DPSM ("Data Path State Machine").
>
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>

Applied for next, thanks!

Withholding patch2 for a while, as I need some more time to review it.

Kind regards
Uffe

> ---
>  drivers/mmc/host/mmci.c | 6 ++++++
>  drivers/mmc/host/mmci.h | 2 ++
>  2 files changed, 8 insertions(+)
>
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index 13fa640..e352f5a 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -21,6 +21,7 @@
>  #include <linux/err.h>
>  #include <linux/highmem.h>
>  #include <linux/log2.h>
> +#include <linux/mmc/mmc.h>
>  #include <linux/mmc/pm.h>
>  #include <linux/mmc/host.h>
>  #include <linux/mmc/card.h>
> @@ -274,6 +275,7 @@ static struct variant_data variant_stm32_sdmmc = {
>         .cmdreg_lrsp_crc        = MCI_CPSM_STM32_LRSP_CRC,
>         .cmdreg_srsp_crc        = MCI_CPSM_STM32_SRSP_CRC,
>         .cmdreg_srsp            = MCI_CPSM_STM32_SRSP,
> +       .cmdreg_stop            = MCI_CPSM_STM32_CMDSTOP,
>         .data_cmd_enable        = MCI_CPSM_STM32_CMDTRANS,
>         .irq_pio_mask           = MCI_IRQ_PIO_STM32_MASK,
>         .datactrl_first         = true,
> @@ -1100,6 +1102,10 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
>                 mmci_reg_delay(host);
>         }
>
> +       if (host->variant->cmdreg_stop &&
> +           cmd->opcode == MMC_STOP_TRANSMISSION)
> +               c |= host->variant->cmdreg_stop;
> +
>         c |= cmd->opcode | host->variant->cmdreg_cpsm_enable;
>         if (cmd->flags & MMC_RSP_PRESENT) {
>                 if (cmd->flags & MMC_RSP_136)
> diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
> index 550dd39..2422909 100644
> --- a/drivers/mmc/host/mmci.h
> +++ b/drivers/mmc/host/mmci.h
> @@ -264,6 +264,7 @@ struct mmci_host;
>   * @cmdreg_lrsp_crc: enable value for long response with crc
>   * @cmdreg_srsp_crc: enable value for short response with crc
>   * @cmdreg_srsp: enable value for short response without crc
> + * @cmdreg_stop: enable value for stop and abort transmission
>   * @datalength_bits: number of bits in the MMCIDATALENGTH register
>   * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
>   *           is asserted (likewise for RX)
> @@ -316,6 +317,7 @@ struct variant_data {
>         unsigned int            cmdreg_lrsp_crc;
>         unsigned int            cmdreg_srsp_crc;
>         unsigned int            cmdreg_srsp;
> +       unsigned int            cmdreg_stop;
>         unsigned int            datalength_bits;
>         unsigned int            fifosize;
>         unsigned int            fifohalfsize;
> --
> 2.7.4
>

  reply	other threads:[~2018-12-11  9:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-06 15:13 [PATCH V3 0/2] mmc: mmci: add stop command Ludovic Barre
2018-12-06 15:13 ` [PATCH V3 1/2] mmc: mmci: add variant property to set command stop bit Ludovic Barre
2018-12-11  9:47   ` Ulf Hansson [this message]
2018-12-11  9:53     ` Ludovic BARRE
2019-01-03 10:35       ` Ludovic BARRE
2019-01-24 15:03         ` [Linux-stm32] " Ludovic BARRE
2019-01-24 15:12           ` Ulf Hansson
2018-12-06 15:13 ` [PATCH V3 2/2] mmc: mmci: send stop command to clear the dpsm Ludovic Barre
2019-01-29 14:31   ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAPDyKFq7TZMKWMqmoDR0yfr2N2cf2nr4-BuEs5DPgJSGy-nvAA@mail.gmail.com \
    --to=ulf.hansson@linaro.org \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=ludovic.Barre@st.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).