From: Ulf Hansson <ulf.hansson@linaro.org>
To: Aswath Govindraju <a-govindraju@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] drivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit
Date: Thu, 21 Apr 2022 14:11:59 +0200 [thread overview]
Message-ID: <CAPDyKFreftOExcZ9hgxpDGtdHhniB847vGAGpoO-McTy5_ao1w@mail.gmail.com> (raw)
In-Reply-To: <20220418102040.4993-3-a-govindraju@ti.com>
On Mon, 18 Apr 2022 at 12:21, Aswath Govindraju <a-govindraju@ti.com> wrote:
>
> From: Vignesh Raghavendra <vigneshr@ti.com>
>
> The ARASAN MMC controller on Keystone 3 class of devices need the SDCD
> line to be connected for proper functioning. Similar to the issue pointed
> out in sdhci-of-arasan.c driver, commit 3794c542641f ("mmc:
> sdhci-of-arasan: Set controller to test mode when no CD bit").
>
> In cases where this can't be connected, add a quirk to force the
> controller into test mode and set the TESTCD bit. Use the flag
> "ti,fails-without-test-cd", to implement this above quirk when required.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
> drivers/mmc/host/sdhci_am654.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
> index e54fe24d47e7..c36b969ed1b6 100644
> --- a/drivers/mmc/host/sdhci_am654.c
> +++ b/drivers/mmc/host/sdhci_am654.c
> @@ -147,6 +147,9 @@ struct sdhci_am654_data {
> int drv_strength;
> int strb_sel;
> u32 flags;
> + u32 quirks;
> +
> +#define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
> };
>
> struct sdhci_am654_driver_data {
> @@ -369,6 +372,21 @@ static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
> }
> }
>
> +void sdhci_am654_reset(struct sdhci_host *host, u8 mask)
This should be a static function.
> +{
> + u8 ctrl;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
> +
> + sdhci_reset(host, mask);
> +
> + if (sdhci_am654->quirks & SDHCI_AM654_QUIRK_FORCE_CDTEST) {
> + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> + ctrl |= SDHCI_CTRL_CDTEST_INS | SDHCI_CTRL_CDTEST_EN;
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> + }
> +}
> +
> static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
> {
> struct sdhci_host *host = mmc_priv(mmc);
> @@ -500,7 +518,7 @@ static struct sdhci_ops sdhci_j721e_4bit_ops = {
> .set_clock = sdhci_j721e_4bit_set_clock,
> .write_b = sdhci_am654_write_b,
> .irq = sdhci_am654_cqhci_irq,
> - .reset = sdhci_reset,
> + .reset = sdhci_am654_reset,
> };
>
> static const struct sdhci_pltfm_data sdhci_j721e_4bit_pdata = {
> @@ -719,6 +737,9 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev,
> device_property_read_u32(dev, "ti,clkbuf-sel",
> &sdhci_am654->clkbuf_sel);
>
> + if (device_property_read_bool(dev, "ti,fails-without-test-cd"))
> + sdhci_am654->quirks |= SDHCI_AM654_QUIRK_FORCE_CDTEST;
> +
> sdhci_get_of_property(pdev);
>
> return 0;
> --
> 2.17.1
>
Other than the minor thing above, this looks good to me.
Kind regards
Uffe
next prev parent reply other threads:[~2022-04-21 12:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-18 10:20 [PATCH 0/2] MMC: Add quirk to set the TESTCD bit Aswath Govindraju
2022-04-18 10:20 ` [PATCH 1/2] dt-bindings: mmc: sdhci-am654: Add flag to force setting to " Aswath Govindraju
2022-04-21 12:10 ` Ulf Hansson
2022-04-25 6:19 ` Aswath Govindraju
2022-04-18 10:20 ` [PATCH 2/2] drivers: mmc: sdhci_am654: Add the quirk to set " Aswath Govindraju
2022-04-18 11:55 ` kernel test robot
2022-04-18 14:49 ` kernel test robot
2022-04-21 12:11 ` Ulf Hansson [this message]
2022-04-25 6:44 ` Aswath Govindraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPDyKFreftOExcZ9hgxpDGtdHhniB847vGAGpoO-McTy5_ao1w@mail.gmail.com \
--to=ulf.hansson@linaro.org \
--cc=a-govindraju@ti.com \
--cc=adrian.hunter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).