From: 李维豪 <cn.liweihao@gmail.com>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: robh@kernel.org, hjc@rock-chips.com, andy.yan@rock-chips.com,
devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v1 0/7] drm/rockchip: Add MIPI DSI support for RK3368
Date: Mon, 1 Sep 2025 08:46:18 +0800 [thread overview]
Message-ID: <CAPEOAkSm+6WtzSL1GzU_srHQT0ZBKKoFD1v5+ePqHTPBndPS=g@mail.gmail.com> (raw)
In-Reply-To: <22816630.EfDdHjke4D@diego>
Hi,
Heiko Stübner <heiko@sntech.de> 于2025年8月31日周日 23:10写道:
>
> Hi,
>
> Am Sonntag, 31. August 2025, 12:48:48 Mitteleuropäische Sommerzeit schrieb WeiHao Li:
> > This series adds MIPI DSI support for the Rockchip RK3368 SoC, enabling
> > native display connectivity through the MIPI DSI host controller and
> > PHY. The changes span multiple subsystems, including clock control,
> > DRM/VOP integration, DSI controller binding, and PHY driver updates.
> >
> > Key changes:
> > - Update the Rockchip MIPI DSI PHY driver to preperly handle RK3368
> > phy initialization.
>
> which patch is doing this, because I don't see any phy-related change
>
The first patch, changes for dw-mipi-dsi-rockchip.c, some settings for
mipi dphy.
Maybe I should adjust the description, it's a bit unclear.
> > - Add missing lut_size of vop_data for RK3368.
> > - Add missing clock ID SCLK_MIPIDSI_24M to the RK3368 CRU driver,
> > which is required for enabling the 24MHz reference clock.
> > - Add MIPI DSI node to rk3368.dtsi with correct clocks, resets,
> > and register mappings.
> >
> > These changes were tested on a RK3368-based board with a MIPI DSI
> > panel [1]. The display boots successfully with console output.
> >
> > [1] https://ieiao.github.io/wiki/embedded-dev/rockchip/rk3368
>
> Do you plan on submitting this board to mainline?
> Because having an actual user of the code you're adding would
> be really really nice.
>
I'd be happy to submit this board support.
However, after searching for a while, I couldn't find the manufacturer
information of this device and mipi dsi panel. I am not sure whether
the devicetree support of unknown manufacturers allows submission to
mainline.
> Thanks
> Heiko
>
> >
> > Tested-by: WeiHao Li <cn.liweihao@gmail.com>
> > Signed-off-by: WeiHao Li <cn.liweihao@gmail.com>
> >
> > WeiHao Li (7):
> > drm/rockchip: dsi: Add support for RK3368
> > drm/rockchip: vop: add lut_size for RK3368 vop_data
> > dt-bindings: clock: rk3368: Add SCLK_MIPIDSI_24M
> > clk: rockchip: use clock ids for SCLK_MIPIDSI_24M on rk3368
> > ARM: dts: rockchip: Add display subsystem for RK3368
> > ARM: dts: rockchip: Add D-PHY for RK3368
> > ARM: dts: rockchip: Add DSI for RK3368
> >
> > arch/arm64/boot/dts/rockchip/rk3368.dtsi | 79 +++++++++++++++++++
> > drivers/clk/rockchip/clk-rk3368.c | 2 +-
> > .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 20 +++++
> > drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
> > include/dt-bindings/clock/rk3368-cru.h | 1 +
> > 5 files changed, 102 insertions(+), 1 deletion(-)
> >
> >
>
>
>
>
Best regards,
WeiHao
next prev parent reply other threads:[~2025-09-01 0:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-31 10:48 [PATCH v1 0/7] drm/rockchip: Add MIPI DSI support for RK3368 WeiHao Li
2025-08-31 10:48 ` [PATCH v1 1/7] drm/rockchip: dsi: Add " WeiHao Li
2025-09-03 12:07 ` Heiko Stuebner
2025-09-03 13:37 ` 李维豪
2025-08-31 10:48 ` [PATCH v1 2/7] drm/rockchip: vop: add lut_size for RK3368 vop_data WeiHao Li
2025-09-03 12:16 ` Heiko Stuebner
2025-08-31 10:48 ` [PATCH v1 3/7] dt-bindings: clock: rk3368: Add SCLK_MIPIDSI_24M WeiHao Li
2025-08-31 15:00 ` Heiko Stübner
2025-09-01 0:17 ` 李维豪
2025-09-02 6:49 ` Heiko Stuebner
2025-09-03 13:22 ` 李维豪
2025-09-01 21:32 ` Rob Herring (Arm)
2025-08-31 10:48 ` [PATCH v1 4/7] clk: rockchip: use clock ids for SCLK_MIPIDSI_24M on rk3368 WeiHao Li
2025-08-31 10:48 ` [PATCH v1 5/7] ARM: dts: rockchip: Add display subsystem for RK3368 WeiHao Li
2025-08-31 15:04 ` Heiko Stübner
2025-09-01 0:20 ` 李维豪
2025-08-31 10:48 ` [PATCH v1 6/7] ARM: dts: rockchip: Add D-PHY " WeiHao Li
2025-08-31 15:06 ` Heiko Stübner
2025-09-01 0:33 ` 李维豪
2025-08-31 10:48 ` [PATCH v1 7/7] ARM: dts: rockchip: Add DSI " WeiHao Li
2025-08-31 15:09 ` [PATCH v1 0/7] drm/rockchip: Add MIPI DSI support " Heiko Stübner
2025-09-01 0:46 ` 李维豪 [this message]
2025-09-02 13:17 ` Rob Herring (Arm)
2025-09-03 12:19 ` (subset) " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAPEOAkSm+6WtzSL1GzU_srHQT0ZBKKoFD1v5+ePqHTPBndPS=g@mail.gmail.com' \
--to=cn.liweihao@gmail.com \
--cc=andy.yan@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).