[PATCH v5 00/12] Revise Meta(Facebook) Harma BMC(AST2600)

[PATCH v5 00/12] Revise Meta(Facebook) Harma BMC(AST2600)

[Peter Yin]

Summary:
Revise linux device tree entry related to Meta(Facebook) Harma
specific devices connected to BMC(AST2600) SoC.

Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/

Change log:

v4 -> v5
  - Patch 0011 - Add retimer device
  - Patch 0012 - Modify gpio line name

v3 -> v4
  - Patch 0010 - Revise node name
  - fixed PDB temperature node name in Patch 0006

v2 -> v3
  - Patch 0007 - Revise max31790 address
  - Patch 0008 - Harma: Add NIC Fru device
  - Patch 0009 - Add ltc4286 device

v1 -> v2
  - Add infineon,slb9670 information for tpm.
  - Patch 0006 - Add PDB temperature.

v1
  - Patch 0001 - Revise SGPIO line name.
  - Patch 0002 - Mapping ttyS2 to UART4.
  - Patch 0003 - Remove Vuart.
  - Patch 0004 - Add cpu power good line name.
  - Patch 0005 - Add spi-gpio.

Peter Yin (12):
  ARM: dts: aspeed: Harma: Revise SGPIO line name.
  ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.
  ARM: dts: aspeed: Harma: Remove Vuart
  ARM: dts: aspeed: Harma: Add cpu power good line name
  ARM: dts: aspeed: Harma: Add spi-gpio
  ARM: dts: aspeed: Harma: Add PDB temperature
  ARM: dts: aspeed: Harma: Revise max31790 address
  ARM: dts: aspeed: Harma: Add NIC Fru device
  ARM: dts: aspeed: Harma: Add ltc4286 device
  ARM: dts: aspeed: Harma: Revise node name
  ARM: dts: aspeed: Harma: Add retimer device
  ARM: dts: aspeed: Harma: Modify GPIO line name

 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 107 ++++++++++++++----
 1 file changed, 85 insertions(+), 22 deletions(-)

-- 
2.25.1

[PATCH v5 01/12] ARM: dts: aspeed: Harma: Revise SGPIO line name.

[Peter Yin]

The same name as reset-control-smb-e1s
change to reset-control-smb-e1s-0 and reset-control-smb-e1s-0.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 7db3f9eb0016..8a173863ef24 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -505,9 +505,9 @@ &sgpiom0 {
 	"","reset-control-cpu0-p1-mux",
 	"","reset-control-e1s-mux",
 	"power-host-good","reset-control-mb-mux",
-	"","reset-control-smb-e1s",
+	"","reset-control-smb-e1s-0",
 	/*E0-E3 line 64-71*/
-	"","reset-control-smb-e1s",
+	"","reset-control-smb-e1s-1",
 	"host-ready-n","reset-control-srst",
 	"presence-e1s-0","reset-control-usb-hub",
 	"","reset-control",
-- 
2.25.1

[PATCH v5 02/12] ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.

[Peter Yin]

Change routing to match SOL(Serial Over LAN) settings.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 8a173863ef24..a0056d633eb1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -12,8 +12,8 @@ / {
 
 	aliases {
 		serial0 = &uart1;
-		serial1 = &uart6;
-		serial2 = &uart2;
+		serial1 = &uart2;
+		serial2 = &uart4;
 		serial4 = &uart5;
 
 		i2c20 = &imux20;
-- 
2.25.1

[PATCH v5 03/12] ARM: dts: aspeed: Harma: Remove Vuart

[Peter Yin]

Remove vuart to avoid port conflict with uart2

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index a0056d633eb1..5d692e9f541e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -100,10 +100,6 @@ &uart_routing {
 	status = "okay";
 };
 
-&vuart1 {
-	status = "okay";
-};
-
 &wdt1 {
 	status = "okay";
 	pinctrl-names = "default";
-- 
2.25.1

[PATCH v5 04/12] ARM: dts: aspeed: Harma: Add cpu power good line name

[Peter Yin]

Add a line name for cpu power good.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 5d692e9f541e..36aad01dda20 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -501,7 +501,7 @@ &sgpiom0 {
 	"","reset-control-cpu0-p1-mux",
 	"","reset-control-e1s-mux",
 	"power-host-good","reset-control-mb-mux",
-	"","reset-control-smb-e1s-0",
+	"power-cpu-good","reset-control-smb-e1s-0",
 	/*E0-E3 line 64-71*/
 	"","reset-control-smb-e1s-1",
 	"host-ready-n","reset-control-srst",
-- 
2.25.1

[PATCH v5 05/12] ARM: dts: aspeed: Harma: Add spi-gpio

[Peter Yin]

Add spi-gpio for tpm device.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 36aad01dda20..ca3052cce0e0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -28,6 +28,8 @@ aliases {
 		i2c29 = &imux29;
 		i2c30 = &imux30;
 		i2c31 = &imux31;
+
+		spi1 = &spi_gpio;
 	};
 
 	chosen {
@@ -67,6 +69,25 @@ led-2 {
 			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	spi_gpio: spi-gpio {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpmdev@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
 };
 
 // HOST BIOS Debug
-- 
2.25.1

[PATCH v5 06/12] ARM: dts: aspeed: Harma: Add PDB temperature

[Peter Yin]

Add PDB temperature sensor.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index ca3052cce0e0..5c3fa8bbaced 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -203,7 +203,7 @@ max31790@30{
 &i2c1 {
 	status = "okay";
 
-	tmp75@4b {
+	temperature-sensor@4b {
 		compatible = "ti,tmp75";
 		reg = <0x4b>;
 	};
@@ -260,6 +260,11 @@ delta_brick@69 {
 		compatible = "pmbus";
 		reg = <0x69>;
 	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
 };
 
 &i2c5 {
-- 
2.25.1

[PATCH v5 07/12] ARM: dts: aspeed: Harma: Revise max31790 address

[Peter Yin]

Revise max31790 address from 0x30 to 0x5e

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 5c3fa8bbaced..7e98af5836cf 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -192,9 +192,9 @@ &kcs3 {
 &i2c0 {
 	status = "okay";
 
-	max31790@30{
+	max31790@5e{
 		compatible = "max31790";
-		reg = <0x30>;
+		reg = <0x5e>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -212,9 +212,9 @@ temperature-sensor@4b {
 &i2c2 {
 	status = "okay";
 
-	max31790@30{
+	max31790@5e{
 		compatible = "max31790";
-		reg = <0x30>;
+		reg = <0x5e>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-- 
2.25.1

[PATCH v5 08/12] ARM: dts: aspeed: Harma: Add NIC Fru device

[Peter Yin]

Add MB NIC Device

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 7e98af5836cf..6e9e6e559838 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -207,6 +207,12 @@ temperature-sensor@4b {
 		compatible = "ti,tmp75";
 		reg = <0x4b>;
 	};
+
+	// MB NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
 };
 
 &i2c2 {
-- 
2.25.1

[PATCH v5 09/12] ARM: dts: aspeed: Harma: Add ltc4286 device

[Peter Yin]

Add ltc4286 device.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 6e9e6e559838..7dd48c384a4d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -271,6 +271,13 @@ temperature-sensor@49 {
 		compatible = "ti,tmp75";
 		reg = <0x49>;
 	};
+
+	power-monitor@22 {
+		compatible = "lltc,ltc4286";
+		reg = <0x22>;
+		adi,vrange-low-enable;
+		shunt-resistor-micro-ohms = <500>;
+	};
 };
 
 &i2c5 {
-- 
2.25.1

[PATCH v5 10/12] ARM: dts: aspeed: Harma: Revise node name

[Peter Yin]

Revise max31790 and delta_brick node name.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 7dd48c384a4d..530f69005857 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -192,7 +192,7 @@ &kcs3 {
 &i2c0 {
 	status = "okay";
 
-	max31790@5e{
+	pwm@5e{
 		compatible = "max31790";
 		reg = <0x5e>;
 		#address-cells = <1>;
@@ -218,7 +218,7 @@ eeprom@50 {
 &i2c2 {
 	status = "okay";
 
-	max31790@5e{
+	pwm@5e{
 		compatible = "max31790";
 		reg = <0x5e>;
 		#address-cells = <1>;
@@ -262,7 +262,7 @@ eeprom@52 {
 		reg = <0x52>;
 	};
 
-	delta_brick@69 {
+	power-monitor@69 {
 		compatible = "pmbus";
 		reg = <0x69>;
 	};
-- 
2.25.1

[PATCH v5 11/12] ARM: dts: aspeed: Harma: Add retimer device

[Peter Yin]

Add pt5161l device in i2c bus12 and bus21.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 530f69005857..a5abb16e5d8b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -250,6 +250,10 @@ imux21: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+			retimer@24 {
+				compatible = "asteralabs,pt5161l";
+				reg = <0x24>;
+			};
 		};
 	};
 };
@@ -370,6 +374,10 @@ &i2c11 {
 
 &i2c12 {
 	status = "okay";
+	retimer@24 {
+		compatible = "asteralabs,pt5161l";
+		reg = <0x24>;
+	};
 };
 
 &i2c13 {
-- 
2.25.1

[PATCH v5 12/12] ARM: dts: aspeed: Harma: Modify GPIO line name

[Peter Yin]

Add:
"reset-cause-platrst", "cpu0-err-alert", "leakage-detect-alert",
"presence-post-card", "ac-power-button", "P0_I3C_APML_ALERT_L",
"irq-uv-detect-alert", "irq-hsc-alert", "cpu0-prochot-alert",
"cpu0-thermtrip-alert", "reset-cause-pcie", "pvdd11-ocp-alert"

Rename:
"power-cpu-good" to "host0-ready",
"host-ready-n" to "post-end-n

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 38 ++++++++++++++-----
 1 file changed, 29 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index a5abb16e5d8b..e7f4823ca4b3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -332,6 +332,12 @@ gpio@31 {
 		reg = <0x31>;
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","","",
+		"","","presence-cmm","",
+		"","","","",
+		"","","","";
 	};
 
 	i2c-mux@71 {
@@ -471,7 +477,8 @@ &gpio0 {
 	/*A0-A7*/	"","","","","","","","",
 	/*B0-B7*/	"","","","",
 			"bmc-spi-mux-select-0","led-identify","","",
-	/*C0-C7*/	"","","","","","","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"cpu0-err-alert","","",
 	/*D0-D7*/	"","","sol-uart-select","","","","","",
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","","","","","","",
@@ -480,7 +487,8 @@ &gpio0 {
 	/*I0-I7*/	"","","","","","","","",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"led-postcode-0","led-postcode-1",
 			"led-postcode-2","led-postcode-3",
@@ -499,7 +507,16 @@ &gpio0 {
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
 };
 
 &sgpiom0 {
@@ -548,10 +565,10 @@ &sgpiom0 {
 	"","reset-control-cpu0-p1-mux",
 	"","reset-control-e1s-mux",
 	"power-host-good","reset-control-mb-mux",
-	"power-cpu-good","reset-control-smb-e1s-0",
+	"host0-ready","reset-control-smb-e1s-0",
 	/*E0-E3 line 64-71*/
 	"","reset-control-smb-e1s-1",
-	"host-ready-n","reset-control-srst",
+	"post-end-n","reset-control-srst",
 	"presence-e1s-0","reset-control-usb-hub",
 	"","reset-control",
 	/*E4-E7 line 72-79*/
@@ -602,13 +619,16 @@ &sgpiom0 {
 	"SLOT_ID_BCB_2","",
 	"SLOT_ID_BCB_3","",
 	/*K0-K3 line 160-167*/
-	"","","","","","","","",
+	"","","","","","","P0_I3C_APML_ALERT_L","",
 	/*K4-K7 line 168-175*/
-	"","","","","","","","",
+	"","","","","","","irq-uv-detect-alert","",
 	/*L0-L3 line 176-183*/
-	"","","","","","","","",
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
 	/*L4-L7 line 184-191*/
-	"","","","","","","","",
+	"pvdd11-ocp-alert","","","","","","","",
 	/*M0-M3 line 192-199*/
 	"","","","","","","","",
 	/*M4-M7 line 200-207*/
-- 
2.25.1

Re: [PATCH v5 00/12] Revise Meta(Facebook) Harma BMC(AST2600)

[Andrew Jeffery]

On Fri, 2024-04-12 at 17:15 +0800, Peter Yin wrote:
> Summary:
> Revise linux device tree entry related to Meta(Facebook) Harma
> specific devices connected to BMC(AST2600) SoC.
> 
> Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/
> 
> Change log:
> 
> v4 -> v5
>   - Patch 0011 - Add retimer device
>   - Patch 0012 - Modify gpio line name
> 
> v3 -> v4
>   - Patch 0010 - Revise node name
>   - fixed PDB temperature node name in Patch 0006
> 
> v2 -> v3
>   - Patch 0007 - Revise max31790 address
>   - Patch 0008 - Harma: Add NIC Fru device
>   - Patch 0009 - Add ltc4286 device
> 
> v1 -> v2
>   - Add infineon,slb9670 information for tpm.
>   - Patch 0006 - Add PDB temperature.
> 
> v1
>   - Patch 0001 - Revise SGPIO line name.
>   - Patch 0002 - Mapping ttyS2 to UART4.
>   - Patch 0003 - Remove Vuart.
>   - Patch 0004 - Add cpu power good line name.
>   - Patch 0005 - Add spi-gpio.
> 
> Peter Yin (12):
>   ARM: dts: aspeed: Harma: Revise SGPIO line name.
>   ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.
>   ARM: dts: aspeed: Harma: Remove Vuart
>   ARM: dts: aspeed: Harma: Add cpu power good line name
>   ARM: dts: aspeed: Harma: Add spi-gpio
>   ARM: dts: aspeed: Harma: Add PDB temperature
>   ARM: dts: aspeed: Harma: Revise max31790 address
>   ARM: dts: aspeed: Harma: Add NIC Fru device
>   ARM: dts: aspeed: Harma: Add ltc4286 device
>   ARM: dts: aspeed: Harma: Revise node name
>   ARM: dts: aspeed: Harma: Add retimer device
>   ARM: dts: aspeed: Harma: Modify GPIO line name
> 
>  .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 107 ++++++++++++++----
>  1 file changed, 85 insertions(+), 22 deletions(-)
> 

Joel had applied an earlier version of this series to his for-next
branch. I'm collecting patches targeting it while he's on leave. I've
updated the series he'd applied to the v5 you've posted here.

Can you please post any further changes as patches on top? You can find
my branch here:

https://github.com/amboar/linux/tree/for/bmc/dt-6.10

Andrew

Re: [PATCH v5 00/12] Revise Meta(Facebook) Harma BMC(AST2600)

[Chia Hsing Yin]

Sure thing, I will base on version 5 for future modifications.

Thanks.

On Mon, Apr 15, 2024 at 10:00 AM Andrew Jeffery
<andrew@codeconstruct.com.au> wrote:
>
> On Fri, 2024-04-12 at 17:15 +0800, Peter Yin wrote:
> > Summary:
> > Revise linux device tree entry related to Meta(Facebook) Harma
> > specific devices connected to BMC(AST2600) SoC.
> >
> > Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/
> >
> > Change log:
> >
> > v4 -> v5
> >   - Patch 0011 - Add retimer device
> >   - Patch 0012 - Modify gpio line name
> >
> > v3 -> v4
> >   - Patch 0010 - Revise node name
> >   - fixed PDB temperature node name in Patch 0006
> >
> > v2 -> v3
> >   - Patch 0007 - Revise max31790 address
> >   - Patch 0008 - Harma: Add NIC Fru device
> >   - Patch 0009 - Add ltc4286 device
> >
> > v1 -> v2
> >   - Add infineon,slb9670 information for tpm.
> >   - Patch 0006 - Add PDB temperature.
> >
> > v1
> >   - Patch 0001 - Revise SGPIO line name.
> >   - Patch 0002 - Mapping ttyS2 to UART4.
> >   - Patch 0003 - Remove Vuart.
> >   - Patch 0004 - Add cpu power good line name.
> >   - Patch 0005 - Add spi-gpio.
> >
> > Peter Yin (12):
> >   ARM: dts: aspeed: Harma: Revise SGPIO line name.
> >   ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.
> >   ARM: dts: aspeed: Harma: Remove Vuart
> >   ARM: dts: aspeed: Harma: Add cpu power good line name
> >   ARM: dts: aspeed: Harma: Add spi-gpio
> >   ARM: dts: aspeed: Harma: Add PDB temperature
> >   ARM: dts: aspeed: Harma: Revise max31790 address
> >   ARM: dts: aspeed: Harma: Add NIC Fru device
> >   ARM: dts: aspeed: Harma: Add ltc4286 device
> >   ARM: dts: aspeed: Harma: Revise node name
> >   ARM: dts: aspeed: Harma: Add retimer device
> >   ARM: dts: aspeed: Harma: Modify GPIO line name
> >
> >  .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 107 ++++++++++++++----
> >  1 file changed, 85 insertions(+), 22 deletions(-)
> >
>
> Joel had applied an earlier version of this series to his for-next
> branch. I'm collecting patches targeting it while he's on leave. I've
> updated the series he'd applied to the v5 you've posted here.
>
> Can you please post any further changes as patches on top? You can find
> my branch here:
>
> https://github.com/amboar/linux/tree/for/bmc/dt-6.10
>
> Andrew