From: Rahul Sharma <r.sh.open@gmail.com>
To: sw0312.kim@samsung.com
Cc: Rahul Sharma <rahul.sharma@samsung.com>,
linux-samsung-soc@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org,
dri-devel@lists.freedesktop.org, kgene.kim@samsung.com,
inki.dae@samsung.com, joshi@samsung.com
Subject: Re: [PATCH 2/4] drm/exynos: add support for exynos5420 mixer
Date: Wed, 19 Jun 2013 11:02:18 +0530 [thread overview]
Message-ID: <CAPdUM4N__MfcOwN9PCUzP8QEyO4cBKeka_fd2BctFTSJ82XZow@mail.gmail.com> (raw)
In-Reply-To: <51C140A0.2040401@samsung.com>
Sure Seung-Woo,
I will update binding document along with this patch.
regards,
Rahul Sharma.
On Wed, Jun 19, 2013 at 10:54 AM, 김승우 <sw0312.kim@samsung.com> wrote:
> Hi Rahul,
>
> Code part looks good to me but IMHO, binding document for exynos_mixer
> is also fixed like following because compitable string
> samsung,exynos5420-mixer is added with this patch.
>
> Required properties:
> - compatible: value should be:
> 1) "samsung,exynos4210-mixer"
> 2) "samsung,exynos5250-mixer"
> + 3) "samsung,exynos5420-mixer"
>
> Thanks and Regards,
> - Seung-Woo Kim
>
> On 2013년 06월 18일 21:49, Rahul Sharma wrote:
>> Add support for exynos5420 mixer IP in the drm mixer driver.
>>
>> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
>> ---
>> drivers/gpu/drm/exynos/exynos_mixer.c | 49 +++++++++++++++++++++++++--------
>> drivers/gpu/drm/exynos/regs-mixer.h | 7 +++++
>> 2 files changed, 44 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
>> index 2fe6d33..d51ff36 100644
>> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
>> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
>> @@ -78,6 +78,7 @@ struct mixer_resources {
>> enum mixer_version_id {
>> MXR_VER_0_0_0_16,
>> MXR_VER_16_0_33_0,
>> + MXR_VER_128_0_0_184,
>> };
>>
>> struct mixer_context {
>> @@ -283,17 +284,19 @@ static void mixer_cfg_scan(struct mixer_context *ctx, unsigned int height)
>> val = (ctx->interlace ? MXR_CFG_SCAN_INTERLACE :
>> MXR_CFG_SCAN_PROGRASSIVE);
>>
>> - /* choosing between porper HD and SD mode */
>> - if (height <= 480)
>> - val |= MXR_CFG_SCAN_NTSC | MXR_CFG_SCAN_SD;
>> - else if (height <= 576)
>> - val |= MXR_CFG_SCAN_PAL | MXR_CFG_SCAN_SD;
>> - else if (height <= 720)
>> - val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
>> - else if (height <= 1080)
>> - val |= MXR_CFG_SCAN_HD_1080 | MXR_CFG_SCAN_HD;
>> - else
>> - val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
>> + if (ctx->mxr_ver != MXR_VER_128_0_0_184) {
>> + /* choosing between proper HD and SD mode */
>> + if (height <= 480)
>> + val |= MXR_CFG_SCAN_NTSC | MXR_CFG_SCAN_SD;
>> + else if (height <= 576)
>> + val |= MXR_CFG_SCAN_PAL | MXR_CFG_SCAN_SD;
>> + else if (height <= 720)
>> + val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
>> + else if (height <= 1080)
>> + val |= MXR_CFG_SCAN_HD_1080 | MXR_CFG_SCAN_HD;
>> + else
>> + val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
>> + }
>>
>> mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_SCAN_MASK);
>> }
>> @@ -557,6 +560,14 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win)
>> /* setup geometry */
>> mixer_reg_write(res, MXR_GRAPHIC_SPAN(win), win_data->fb_width);
>>
>> + /* setup display size */
>> + if (ctx->mxr_ver == MXR_VER_128_0_0_184 &&
>> + win == MIXER_DEFAULT_WIN) {
>> + val = MXR_MXR_RES_HEIGHT(win_data->fb_height);
>> + val |= MXR_MXR_RES_WIDTH(win_data->fb_width);
>> + mixer_reg_write(res, MXR_RESOLUTION, val);
>> + }
>> +
>> val = MXR_GRP_WH_WIDTH(win_data->crtc_width);
>> val |= MXR_GRP_WH_HEIGHT(win_data->crtc_height);
>> val |= MXR_GRP_WH_H_SCALE(x_ratio);
>> @@ -581,7 +592,8 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win)
>> mixer_cfg_layer(ctx, win, true);
>>
>> /* layer update mandatory for mixer 16.0.33.0 */
>> - if (ctx->mxr_ver == MXR_VER_16_0_33_0)
>> + if (ctx->mxr_ver == MXR_VER_16_0_33_0 ||
>> + ctx->mxr_ver == MXR_VER_128_0_0_184)
>> mixer_layer_update(ctx);
>>
>> mixer_run(ctx);
>> @@ -816,6 +828,7 @@ static void mixer_win_disable(void *ctx, int win)
>>
>> static int mixer_check_mode(void *ctx, struct drm_display_mode *mode)
>> {
>> + struct mixer_context *mixer_ctx = ctx;
>> u32 w, h;
>>
>> w = mode->hdisplay;
>> @@ -825,6 +838,10 @@ static int mixer_check_mode(void *ctx, struct drm_display_mode *mode)
>> mode->hdisplay, mode->vdisplay, mode->vrefresh,
>> (mode->flags & DRM_MODE_FLAG_INTERLACE) ? 1 : 0);
>>
>> + if (mixer_ctx->mxr_ver == MXR_VER_0_0_0_16 ||
>> + mixer_ctx->mxr_ver == MXR_VER_128_0_0_184)
>> + return 0;
>> +
>> if ((w >= 464 && w <= 720 && h >= 261 && h <= 576) ||
>> (w >= 1024 && w <= 1280 && h >= 576 && h <= 720) ||
>> (w >= 1664 && w <= 1920 && h >= 936 && h <= 1080))
>> @@ -1115,6 +1132,11 @@ static int vp_resources_init(struct exynos_drm_hdmi_context *ctx,
>> return 0;
>> }
>>
>> +static struct mixer_drv_data exynos5420_mxr_drv_data = {
>> + .version = MXR_VER_128_0_0_184,
>> + .is_vp_enabled = 0,
>> +};
>> +
>> static struct mixer_drv_data exynos5250_mxr_drv_data = {
>> .version = MXR_VER_16_0_33_0,
>> .is_vp_enabled = 0,
>> @@ -1139,6 +1161,9 @@ static struct platform_device_id mixer_driver_types[] = {
>>
>> static struct of_device_id mixer_match_types[] = {
>> {
>> + .compatible = "samsung,exynos5420-mixer",
>> + .data = &exynos5420_mxr_drv_data,
>> + }, {
>> .compatible = "samsung,exynos5250-mixer",
>> .data = &exynos5250_mxr_drv_data,
>> }, {
>> diff --git a/drivers/gpu/drm/exynos/regs-mixer.h b/drivers/gpu/drm/exynos/regs-mixer.h
>> index 5d8dbc0..4537026 100644
>> --- a/drivers/gpu/drm/exynos/regs-mixer.h
>> +++ b/drivers/gpu/drm/exynos/regs-mixer.h
>> @@ -44,6 +44,9 @@
>> #define MXR_CM_COEFF_Y 0x0080
>> #define MXR_CM_COEFF_CB 0x0084
>> #define MXR_CM_COEFF_CR 0x0088
>> +#define MXR_MO 0x0304
>> +#define MXR_RESOLUTION 0x0310
>> +
>> #define MXR_GRAPHIC0_BASE_S 0x2024
>> #define MXR_GRAPHIC1_BASE_S 0x2044
>>
>> @@ -119,6 +122,10 @@
>> #define MXR_GRP_WH_WIDTH(x) MXR_MASK_VAL(x, 26, 16)
>> #define MXR_GRP_WH_HEIGHT(x) MXR_MASK_VAL(x, 10, 0)
>>
>> +/* bits for MXR_RESOLUTION */
>> +#define MXR_MXR_RES_HEIGHT(x) MXR_MASK_VAL(x, 26, 16)
>> +#define MXR_MXR_RES_WIDTH(x) MXR_MASK_VAL(x, 10, 0)
>> +
>> /* bits for MXR_GRAPHICn_SXY */
>> #define MXR_GRP_SXY_SX(x) MXR_MASK_VAL(x, 26, 16)
>> #define MXR_GRP_SXY_SY(x) MXR_MASK_VAL(x, 10, 0)
>>
>
> --
> Seung-Woo Kim
> Samsung Software R&D Center
> --
>
next prev parent reply other threads:[~2013-06-19 5:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 12:49 [PATCH 0/4] exynos5420/hdmi: add support for hdmi subsystem Rahul Sharma
2013-06-18 12:49 ` [PATCH 1/4] drm/exynos: rename compatible strings " Rahul Sharma
2013-06-19 5:43 ` 김승우
2013-06-19 7:05 ` Inki Dae
2013-06-19 7:36 ` Inki Dae
[not found] ` <1371559778-9359-2-git-send-email-rahul.sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-06-19 7:52 ` Tomasz Figa
2013-06-19 7:59 ` Lucas Stach
2013-06-19 8:27 ` Inki Dae
2013-06-19 9:32 ` Rahul Sharma
2013-06-19 9:50 ` Tomasz Figa
2013-06-19 10:26 ` Rahul Sharma
2013-06-18 12:49 ` [PATCH 2/4] drm/exynos: add support for exynos5420 mixer Rahul Sharma
2013-06-19 5:24 ` 김승우
2013-06-19 5:32 ` Rahul Sharma [this message]
2013-06-18 12:49 ` [PATCH 3/4] drm/exynos: fix interlace resolutions for exynos5420 Rahul Sharma
2013-06-19 5:34 ` 김승우
2013-06-19 5:59 ` Inki Dae
2013-06-18 12:49 ` [PATCH 4/4] ARM/dts: change compatible strings for hdmi subsystem Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPdUM4N__MfcOwN9PCUzP8QEyO4cBKeka_fd2BctFTSJ82XZow@mail.gmail.com \
--to=r.sh.open@gmail.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rahul.sharma@samsung.com \
--cc=sw0312.kim@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).