Re: [PATCH 1/5] ARM: dts: move dp hpd line to the board file for exynos5420

[Rahul Sharma <rahul.sharma@samsung.com>]

On 9 May 2014 06:15, Jingoo Han <jg1.han@samsung.com> wrote:
> On Thursday, May 08, 2014 6:08 PM, Rahul Sharma wrote:
>> On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote:
>> > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote:
>> >>
>> >> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>> >>
>> >> Display controller HPD Gpio line is board specific. This patch
>> >> is moving the pinctrl for hpd gpio line to the respective board
>> >> file.
>> >>
>> >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
>> >> ---
>> >>  arch/arm/boot/dts/exynos5420-pinctrl.dtsi |    7 -------
>> >>  arch/arm/boot/dts/exynos5420-smdk5420.dts |    7 +++++++
>> >>  2 files changed, 7 insertions(+), 7 deletions(-)
>> >>
>> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> index e62c8eb..5848c42 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>> >> @@ -59,13 +59,6 @@
>> >>                       interrupt-controller;
>> >>                       #interrupt-cells = <2>;
>> >>               };
>> >> -
>> >> -             dp_hpd: dp_hpd {
>> >> -                     samsung,pins = "gpx0-7";
>> >> -                     samsung,pin-function = <3>;
>> >> -                     samsung,pin-pud = <0>;
>> >> -                     samsung,pin-drv = <0>;
>> >> -             };
>> >>       };
>> >
>> > (+cc Doug Anderson, Tomasz Figa)
>> >
>> > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific.
>> > So, there should be "gpx0-7" part on chip specific dts file such as
>> > 'exynos5420-pinctrl.dtsi'.
>> >
>> > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin.
>> > This is board specific. In my opinion, the following would look
>> > better. In this way, this patch is not necessary.
>> >
>> > 1. case: Standard HPD pin is used. (smdk5420)
>> > arch/arm/boot/dts/exynos5420-pinctrl.dts
>> >         pinctrl@13400000 {
>> >                 dp_hpd: dp_hpd {
>> >                         samsung,pins = "gpx0-7";
>> >                         samsung,pin-function = <3>;
>> >                         samsung,pin-pud = <0>;
>> >                         samsung,pin-drv = <0>;
>> >                 };
>> > arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >         dp-controller@145B0000 {
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&dp_hpd>;
>> >                 ...
>> >
>> >
>> > 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
>> > arch/arm/boot/dts/exynos5420-peach-pit.dts
>> >         pinctrl@13400000 {
>> >                 dp_hpd: dp_hpd {
>> >                         samsung,pins = "gpx2-6";
>> >                         samsung,pin-function = <0>;
>> >                         samsung,pin-pud = <3>;
>> >                         samsung,pin-drv = <0>;
>> >                 };
>> >         dp-controller@145B0000 {
>> >                 pinctrl-names = "default";
>> >                 pinctrl-0 = <&dp_hpd>;
>> >                 ...
>> >                 samsung,hpd-gpio = <&gpx2 6 0>;
>> >
>> > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts,
>> > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6",
>> > respectively.
>> >
>> > A year ago, Doug Anderson and me agreed that standard HPD pin
>> > part should be included to 'exynos5250-pinctrl.dtsi'.
>> > (https://lkml.org/lkml/2013/5/11/134)
>> >
>>
>> I wasn't aware of this discussion. It make sense. I will drop this patch.
>> I need to choose some other name for this pin, say "peach_dp_hpd".
>> Let me know if any concern.
>
> In my opinion, "dp_hpd_gpio" looks better as below.
>
> arch/arm/boot/dts/exynos5420-peach-pit.dts
>         pinctrl@13400000 {
>                 dp_hpd_gpio: dp_hpd_gpio {
>                         samsung,pins = "gpx2-6";
>                         samsung,pin-function = <0>;
>                         samsung,pin-pud = <3>;
>                         samsung,pin-drv = <0>;
>                 };
>         dp-controller@145B0000 {
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&dp_hpd_gpio>;
>                 ...
>                 samsung,hpd-gpio = <&gpx2 6 0>;

Ok.

>
> Best regards,
> Jingoo Han
>
>>
>> Regards,
>> Rahul Sharma.
>>
>> > Best regards,
>> > Jingoo Han
>> >
>> >>
>> >>       pinctrl@13410000 {
>> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> index 6910485..62d38c8 100644
>> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> >> @@ -138,6 +138,13 @@
>> >>                       samsung,pin-pud = <1>;
>> >>                       samsung,pin-drv = <0>;
>> >>               };
>> >> +
>> >> +             dp_hpd: dp_hpd {
>> >> +                     samsung,pins = "gpx0-7";
>> >> +                     samsung,pin-function = <3>;
>> >> +                     samsung,pin-pud = <0>;
>> >> +                     samsung,pin-drv = <0>;
>> >> +             };
>> >>       };
>> >>
>> >>       hdmi@14530000 {
>> >> --
>> >> 1.7.9.5
>> >
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel