Re: [PATCH 0/7] Add support for LUT PPG

["Luca Weiss" <luca.weiss@fairphone.com>]

Hi Anjelique,

On Wed Jun 21, 2023 at 8:59 PM CEST, Anjelique Melendez wrote:
> In certain PMICs, LUT pattern and LPG configuration can be stored in SDAM
> modules instead of LUT peripheral. This feature is called PPG.
>
> This change series adds support for PPG. Thanks!

Thanks for sending this series!

I've tested this on SDM632 Fairphone 3 and everything appears to work
fine with setting the pattern. Using fbcli from feedbackd[0] the pattern
shows up correctly.

The only thing missing really is the addition of the pbs node and adding
the nvmem/nvmem-names & qcom,pbs-client to the lpg node in pmi632.dtsi -
something like the patch below.

Are you planning to include this in the next revision? Otherwise I can
also send a patch for the pmi632.dtsi after this series has landed.

Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sdm632-fairphone-fp3 (pmi632)

[0] https://source.puri.sm/Librem5/feedbackd

Regards
Luca

diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
index add206dee01d2e..92ddb7ac6bf311 100644
--- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -127,6 +127,11 @@
 			status = "disabled";
 		};
 
+		pmi632_pbs_client3: qcom,pbs@7400 { // TODO: generic node name
+			compatible = "qcom,pbs";
+			reg = <0x7400>;
+		};
+
 		pmi632_sdam_7: nvram@b600 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0xb600>;
@@ -155,6 +160,10 @@
 		pmi632_lpg: pwm {
 			compatible = "qcom,pmi632-lpg";
 
+			nvmem = <&pmi632_sdam_7>;
+			nvmem-names = "lpg_chan_sdam";
+			qcom,pbs-client = <&pmi632_pbs_client3>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#pwm-cells = <2>;

>
> Anjelique Melendez (7):
>   dt-bindings: soc: qcom: Add qcom-pbs bindings
>   dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM
>     devices
>   soc: qcom: add QCOM PBS driver
>   leds: rgb: leds-qcom-lpg: Add support for LUT pattern through single
>     SDAM
>   leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
>   leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
>   leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
>
>  .../bindings/leds/leds-qcom-lpg.yaml          |  85 ++++
>  .../bindings/soc/qcom/qcom-pbs.yaml           |  41 ++
>  drivers/leds/rgb/leds-qcom-lpg.c              | 393 ++++++++++++++++--
>  drivers/soc/qcom/Kconfig                      |   9 +
>  drivers/soc/qcom/Makefile                     |   1 +
>  drivers/soc/qcom/qcom-pbs.c                   | 343 +++++++++++++++
>  include/linux/soc/qcom/qcom-pbs.h             |  36 ++
>  7 files changed, 877 insertions(+), 31 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
>  create mode 100644 drivers/soc/qcom/qcom-pbs.c
>  create mode 100644 include/linux/soc/qcom/qcom-pbs.h