Re: [PATCH v4 4/4] clk: eyeq: add driver

["Théo Lebrun" <theo.lebrun@bootlin.com>]

Hello Christophe,

On Fri Oct 4, 2024 at 6:34 PM CEST, Christophe JAILLET wrote:
> Le 04/10/2024 à 17:45, Théo Lebrun a écrit :
> > +static void eqc_probe_init_plls(struct device *dev, struct eqc_priv *priv)
> > +{
> > +	const struct eqc_match_data *data = priv->data;
> > +	unsigned long mult, div, acc;
> > +	const struct eqc_pll *pll;
> > +	struct clk_hw *hw;
> > +	unsigned int i;
> > +	u32 r0, r1;
> > +	u64 val;
> > +	int ret;
> > +
> > +	for (i = 0; i < data->pll_count; i++) {
> > +		pll = &data->plls[i];
> > +
> > +		val = readq(priv->base + pll->reg64);
> > +		r0 = val;
> > +		r1 = val >> 32;
> > +
> > +		ret = eqc_pll_parse_registers(r0, r1, &mult, &div, &acc);
> > +		if (ret) {
> > +			dev_warn(dev, "failed parsing state of %s\n", pll->name);
> > +			priv->cells->hws[pll->index] = ERR_PTR(ret);
> > +			continue;
> > +		}
> > +
> > +		hw = clk_hw_register_fixed_factor_with_accuracy_fwname(dev,
> > +				dev->of_node, pll->name, "ref", 0, mult, div, acc);
>
> Should this be freed somewhere or is it auto-magically freed by a 
> put_something()?
> Maybe devm_action_or_reset()?

This driver does not support being removed. It provides essential PLLs
and the system has not chance of working without them.

Almost all instances will be instantiated at of_clk_init() stage by the
way (ie before platform bus infrastructure init). Devres isn't a
solution in those cases.

We are missing suppress_bind_attrs though.
I can add that at next revision.

Thanks,

--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com