Re: [PATCH 2/3] hwmon: (sht21) Add devicetree support

["Kurt Borja" <kuurtb@gmail.com>]

On Sun Sep 7, 2025 at 5:19 PM -05, Guenter Roeck wrote:
> On 9/7/25 15:06, Kurt Borja wrote:
>> Add DT support for sht2x chips.
>> 
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
>> ---
>>   drivers/hwmon/sht21.c | 10 +++++++++-
>>   1 file changed, 9 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
>> index a2748659edc262dac9d87771f849a4fc0a29d981..9813e04f60430f8e60f614d9c68785428978c4a4 100644
>> --- a/drivers/hwmon/sht21.c
>> +++ b/drivers/hwmon/sht21.c
>> @@ -283,8 +283,16 @@ static const struct i2c_device_id sht21_id[] = {
>>   };
>>   MODULE_DEVICE_TABLE(i2c, sht21_id);
>>   
>> +static const struct of_device_id sht21_of_match[] = {
>> +	{ .compatible = "sensirion,sht2x" },
>
> This should be individual entries, not a placeholder for multiple chips.

Sure! I'll add an entry for each chip.

FWIW sensirion also uses sht2x as a placeholder in datasheets.

Thanks for your review!

>
>> +	{ }
>> +};
>> +
>>   static struct i2c_driver sht21_driver = {
>> -	.driver.name = "sht21",
>> +	.driver = {
>> +		.name = "sht21",
>> +		.of_match_table = sht21_of_match,
>> +	},
>>   	.probe       = sht21_probe,
>>   	.id_table    = sht21_id,
>>   };
>> 


-- 
 ~ Kurt