From: "Alexey Klimov" <alexey.klimov@linaro.org>
To: "Neil Armstrong" <neil.armstrong@linaro.org>,
"Srinivas Kandagatla" <srini@kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Jaroslav Kysela" <perex@perex.cz>,
"Takashi Iwai" <tiwai@suse.com>, "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>
Cc: <linux-sound@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH RFC 4/6] sm8650-hdk: Enable I2S for HDMI
Date: Tue, 07 Oct 2025 02:39:50 +0100 [thread overview]
Message-ID: <DDBPGIDN8SKS.2GF6TZC6KGXVI@linaro.org> (raw)
In-Reply-To: <20251006-topic-sm8x50-next-hdk-i2s-v1-4-184b15a87e0a@linaro.org>
On Mon Oct 6, 2025 at 7:37 PM BST, Neil Armstrong wrote:
> Add the necessary nodes to configure the right I2S interface
> to output audio via the DSI HDMI bridge.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 30 +++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8650.dtsi | 40 +++++++++++++++++++++++++++++++++
> 2 files changed, 70 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> index 87d7190dc991b11f5d1162aabb693dcadd198c51..1286ce95235d5544322a1877292cbdd426298c11 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> @@ -171,6 +171,19 @@ sound {
> "TX SWR_INPUT1", "ADC2_OUTPUT",
> "TX SWR_INPUT3", "ADC4_OUTPUT";
>
> + pinctrl-0 = <&i2s0_default_state>, <&audio_mclk0_default_state>;
> + pinctrl-names = "default";
> +
> + clocks = <&q6prmcc LPASS_CLK_ID_PRI_MI2S_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_CLK_ID_MCLK_1 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> + clock-names = "pri-mi2s",
> + "pri-mclk";
> +
> + assigned-clocks = <&q6prmcc LPASS_CLK_ID_PRI_MI2S_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_CLK_ID_MCLK_1 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> + assigned-clock-rates = <1536000>,
> + <24576000>;
> +
> wcd-playback-dai-link {
> link-name = "WCD Playback";
>
> @@ -218,6 +231,22 @@ platform {
> sound-dai = <&q6apm>;
> };
> };
> +
> + pri-mi2s-dai-link {
> + link-name = "Primary MI2S Playback";
Is it HDMI only audio playback or does it have switches to playback it as raw i2s
(when external DAC is needed)?
> + cpu {
> + sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
> + };
> +
> + codec {
> + sound-dai = <<9611_codec 0>;
> + };
> +
> + platform {
> + sound-dai = <&q6apm>;
> + };
> + };
> };
[..]
Best regards,
Alexey
next prev parent reply other threads:[~2025-10-07 1:39 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-06 18:37 [PATCH RFC 0/6] ASoC: qcom: enable HDMI audio on SM8[456]50 HDK boards Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 1/6] ASoC: qcom: qdsp6: q6prm: add the missing MCLK clock IDs Neil Armstrong
2025-10-06 22:13 ` Srinivas Kandagatla
2025-10-07 10:19 ` Konrad Dybcio
2025-10-06 18:37 ` [PATCH RFC 2/6] ASoC: dt-bindings: qcom,sm8250: Add clocks properties for I2S Neil Armstrong
2025-10-07 10:21 ` Konrad Dybcio
2025-10-08 17:53 ` Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 3/6] ASoC: soc: qcom: sc8280xp: add support for I2S clocks Neil Armstrong
2025-10-06 22:21 ` Srinivas Kandagatla
2025-10-07 7:02 ` Neil Armstrong
2025-10-07 10:23 ` Konrad Dybcio
2025-10-07 15:48 ` Neil Armstrong
2025-10-08 17:51 ` Neil Armstrong
2025-10-07 1:35 ` Alexey Klimov
2025-10-07 7:02 ` Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 4/6] sm8650-hdk: Enable I2S for HDMI Neil Armstrong
2025-10-07 1:39 ` Alexey Klimov [this message]
2025-10-07 7:04 ` Neil Armstrong
2025-10-07 15:39 ` Alexey Klimov
2025-10-07 10:24 ` Konrad Dybcio
2025-10-06 18:37 ` [PATCH RFC 5/6] sm8550-hdk: " Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 6/6] sm8450-hdk: " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DDBPGIDN8SKS.2GF6TZC6KGXVI@linaro.org \
--to=alexey.klimov@linaro.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).