From: "Diederik de Haas" <diederik@cknow-tech.com>
To: "Heiko Stuebner" <heiko@sntech.de>, <vkoul@kernel.org>
Cc: <neil.armstrong@linaro.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-rockchip@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <jonas@kwiboo.se>
Subject: Re: [PATCH v2 3/5] dt-bindings: phy: rockchip,inno-usb2phy: Add compatible for RK3528
Date: Wed, 13 May 2026 11:09:58 +0200 [thread overview]
Message-ID: <DIHFJX03WWI4.1F9FMM0HOCPK@cknow-tech.com> (raw)
In-Reply-To: <20260505170410.3265305-4-heiko@sntech.de>
Hi Heiko,
On Tue May 5, 2026 at 7:04 PM CEST, Heiko Stuebner wrote:
> From: Jonas Karlman <jonas@kwiboo.se>
>
> The embedded USB2 PHY on RK3528 is very similar to the one in RK3568,
> the main difference being that it only uses two clocks instead of three.
>
> Add compatible to support the USB2 PHY in RK3528.
>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> .../bindings/phy/rockchip,inno-usb2phy.yaml | 30 ++++++++++++++++---
> 1 file changed, 26 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
> index b95c9e3e44fe..f50fc69fbbe4 100644
> --- a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
> @@ -20,6 +20,7 @@ properties:
> - rockchip,rk3328-usb2phy
> - rockchip,rk3366-usb2phy
> - rockchip,rk3399-usb2phy
> + - rockchip,rk3528-usb2phy
> - rockchip,rk3562-usb2phy
> - rockchip,rk3568-usb2phy
> - rockchip,rk3576-usb2phy
> @@ -41,11 +42,15 @@ properties:
> maxItems: 3
>
> clock-names:
> - minItems: 1
> - items:
> + oneOf:
> - const: phyclk
> - - const: aclk
> - - const: aclk_slv
> + - items:
> + - const: phyclk
> + - const: pclk
> + - items:
> + - const: phyclk
> + - const: aclk
> + - const: aclk_slv
>
> assigned-clocks:
> description:
> @@ -65,6 +70,9 @@ properties:
> description: Muxed interrupt for both ports
> maxItems: 1
>
> + power-domains:
> + maxItems: 1
> +
The commit message talks about (the differences in) clocks, but says
nothing about power-domains. Shouldn't that be mentioned and/or split
off into its own patch? (FWIW: I like the change itself)
Cheers,
Diederik
> resets:
> maxItems: 2
>
> @@ -150,6 +158,7 @@ allOf:
> compatible:
> contains:
> enum:
> + - rockchip,rk3528-usb2phy
> - rockchip,rk3568-usb2phy
> - rockchip,rv1108-usb2phy
> then:
> @@ -218,6 +227,19 @@ allOf:
> clock-names:
> maxItems: 1
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - rockchip,rk3528-usb2phy
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + clock-names:
> + minItems: 2
> +
> - if:
> properties:
> compatible:
next prev parent reply other threads:[~2026-05-13 9:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-05 17:04 [PATCH v2 0/5] rockchip: Add USB 2.0 support for RK3528 Heiko Stuebner
2026-05-05 17:04 ` [PATCH v2 1/5] dt-bindings: phy: rockchip,inno-usb2phy: Require GRF for RK3568/RV1108 Heiko Stuebner
2026-05-05 17:04 ` [PATCH v2 2/5] phy: rockchip: inno-usb2: Simplify rockchip,usbgrf handling Heiko Stuebner
2026-05-06 14:42 ` neil.armstrong
2026-05-05 17:04 ` [PATCH v2 3/5] dt-bindings: phy: rockchip,inno-usb2phy: Add compatible for RK3528 Heiko Stuebner
2026-05-13 9:09 ` Diederik de Haas [this message]
2026-05-05 17:04 ` [PATCH v2 4/5] phy: rockchip: inno-usb2: Add clkout_ctl_phy support Heiko Stuebner
2026-05-06 14:45 ` neil.armstrong
2026-05-05 17:04 ` [PATCH v2 5/5] phy: rockchip: inno-usb2: Add support for RK3528 Heiko Stuebner
2026-05-06 14:45 ` neil.armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DIHFJX03WWI4.1F9FMM0HOCPK@cknow-tech.com \
--to=diederik@cknow-tech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox