Re: [PATCH v5 RESEND 4/5] riscv64: dts: sophgo: add SG2000 dtsi

["Shuwei Wu" <shuwei.wu@mailbox.org>]

Hi Joshua,

On Sun May 31, 2026 at 1:33 AM CST, Joshua Milas wrote:
> Adds sg2000.dtsi on the RISCV side.
>
> Signed-off-by: Joshua Milas <josh.milas@gmail.com>
> ---
>  arch/riscv/boot/dts/sophgo/sg2000.dtsi | 53 ++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/sophgo/sg2000.dtsi
>
> diff --git a/arch/riscv/boot/dts/sophgo/sg2000.dtsi b/arch/riscv/boot/dts/sophgo/sg2000.dtsi
> new file mode 100644
> index 0000000000000..412adacc00576
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sophgo/sg2000.dtsi
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +#define SOC_PERIPHERAL_IRQ(nr)	((nr) + 16)
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/pinctrl-sg2000.h>
> +#include "cv180x-cpus.dtsi"
> +#include "cv180x.dtsi"
> +#include "cv181x.dtsi"
> +
> +/ {
> +	compatible = "sophgo,sg2000";
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x10000000>;
> +	};

I noticed that this describes 256 MiB of RAM. The Milk-V Duo documentation lists
the SG2000-based Duo boards as having 512 MB of DRAM [1].
Is the 256 MiB size intentional here, or should the Duo S board DTS override it
with the documented 512 MB DRAM size?
[1] https://milkv.io/docs/duo/overview

> +
> +	soc {
> +		interrupt-parent = <&plic>;
> +		dma-noncoherent;
> +
> +		pinctrl: pinctrl@3001000 {
> +			compatible = "sophgo,sg2000-pinctrl";
> +			reg = <0x03001000 0x1000>,
> +			      <0x05027000 0x1000>;
> +			reg-names = "sys", "rtc";
> +		};
> +
> +		clk: clock-controller@3002000 {
> +			compatible = "sophgo,sg2000-clk";
> +			reg = <0x03002000 0x1000>;
> +			clocks = <&osc>;
> +			#clock-cells = <1>;
> +		};
> +
> +		plic: interrupt-controller@70000000 {
> +			compatible = "sophgo,sg2000-plic", "thead,c900-plic";
> +			reg = <0x70000000 0x4000000>;
> +			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
> +			interrupt-controller;
> +			#address-cells = <0>;
> +			#interrupt-cells = <2>;
> +			riscv,ndev = <101>;
> +		};
> +
> +		clint: timer@74000000 {
> +			compatible = "sophgo,sg2000-clint", "thead,c900-clint";
> +			reg = <0x74000000 0x10000>;
> +			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
> +		};
> +	};
> +};

-- 
Best regards,
Shuwei Wu