Re: [PATCH v3 9/9] iio: adc: ti-ads1262: support common mode supplies

["Kurt Borja" <kuurtb@gmail.com>]

On Sat Aug 8, 2026 at 1:40 PM -05, David Lechner wrote:
> On 8/7/26 10:58 PM, Kurt Borja wrote:
>> Enable common mode regulators. The usual configuration is to have our
>> own 'vbias' regulator connected internally as common mode voltage on the
>> AINCOM pin.
>> 
>> Signed-off-by: Kurt Borja <kuurtb@gmail.com>
>> ---
>>  drivers/iio/adc/ti-ads1262.c | 25 +++++++++++++++++++++++++
>>  1 file changed, 25 insertions(+)
>> 
>> diff --git a/drivers/iio/adc/ti-ads1262.c b/drivers/iio/adc/ti-ads1262.c
>> index 533574169b04..238d803abc50 100644
>> --- a/drivers/iio/adc/ti-ads1262.c
>> +++ b/drivers/iio/adc/ti-ads1262.c
>> @@ -962,6 +962,27 @@ static irqreturn_t ads1262_irq_handler(int irq, void *dev_id)
>>  	return IRQ_HANDLED;
>>  }
>>  
>> +static int ads1262_common_mode_setup(struct ads1262 *st)
>> +{
>> +	struct device *dev = &st->spi->dev;
>> +	char name[sizeof("aincom")];
>> +	int ret;
>> +
>> +	for (unsigned int i = 0; i <= ADS1262_INPMUX_AINCOM; i++) {
>> +		if (i < ADS1262_INPMUX_AINCOM)
>> +			scnprintf(name, sizeof(name), "ain%u", i);
>> +		else
>> +			scnprintf(name, sizeof(name), "aincom");
>> +
>> +		ret = devm_regulator_get_enable_optional(dev, name);
>
> We need to get the voltage which is then used to provide an offset
> (IIO_CHAN_INFO_OFFSET) for the channel.

Sure! I didn't think it was necessary but I can definitely add it.

-- 
Thanks,
 ~ Kurt