From: "Luca Weiss" <luca.weiss@fairphone.com>
To: "erebion" <erebion@erebion.eu>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Jessica Zhang" <jesszhan0024@gmail.com>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<phone-devel@vger.kernel.org>
Subject: Re: [PATCH v5 11/12] arm64: dts: qcom: sm6350-lena: Add PM6150L thermals
Date: Tue, 17 Nov 2026 13:10:15 +0100 [thread overview]
Message-ID: <DMXH4DEA8NRH.2HZPS0S9ASHN9@fairphone.com> (raw)
In-Reply-To: <20261116-pdx213-upstream-3-v5-11-7318a19806eb@erebion.eu>
On Mon Nov 16, 2026 at 11:50 PM CET, erebion wrote:
> Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
> CAM_FLASH_THERM and QUIET_THERM thermistors connected to
> PM6150L.
>
> Due to hardware constraints we can only register 4 zones with
> pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.
>
> RFC_CAM_THERM is intentionally omitted for now and will have to be
> added once it is clear how it should be added.
>
> The trip points can really only be considered as placeholders, more
> configuration with cooling etc. can be added later.
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: erebion <erebion@erebion.eu>
> ---
> .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 160 +++++++++++++++++++++
> 1 file changed, 160 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index b86fe11fd5296..b19e76b3c1a75 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -81,6 +81,13 @@ memory@fe901000 {
> };
> };
>
> + msm_therm_sensor: thermal-sensor-msm {
> + compatible = "generic-adc-thermal";
> + #thermal-sensor-cells = <0>;
> + io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
> + io-channel-names = "sensor-channel";
> + };
> +
> thermal-zones {
> chg-skin-thermal {
> thermal-sensors = <&pm7250b_adc_tm 0>;
> @@ -106,6 +113,74 @@ active-config0 {
> };
> };
>
> + pa0-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 1>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + pa1-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 0>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + quiet-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 3>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + rfc-flash-thermal {
> + thermal-sensors = <&pm6150l_adc_tm 2>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + sdm-skin-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&msm_therm_sensor>;
> +
> + trips {
> + trip0 {
> + temperature = <45000>;
> + hysteresis = <0>;
> + type = "passive";
> + };
> +
> + trip1 {
> + temperature = <55000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + };
> +
> xo-thermal {
> thermal-sensors = <&pmk8350_adc_tm 0>;
>
> @@ -392,6 +467,83 @@ &mpss {
> status = "okay";
> };
>
> +&pm6150l_adc {
> + pinctrl-0 = <&pm6150l_adc_default>;
> + pinctrl-names = "default";
> +
> + channel@4d {
> + reg = <ADC5_AMUX_THM1_100K_PU>;
> + label = "pa_therm1";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@4e {
> + reg = <ADC5_AMUX_THM2_100K_PU>;
> + label = "msm_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@4f {
> + reg = <ADC5_AMUX_THM3_100K_PU>;
> + label = "pa_therm0";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@54 {
> + reg = <ADC5_GPIO3_100K_PU>;
> + label = "rear_cam_flash_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +
> + channel@55 {
> + reg = <ADC5_GPIO4_100K_PU>;
> + label = "quiet_therm";
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + };
> +};
> +
> +&pm6150l_adc_tm {
> + status = "okay";
> +
> + pa-therm1@0 {
> + reg = <0>;
> + io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +
> + pa-therm0@1 {
> + reg = <1>;
> + io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +
> + rear-cam-flash-therm@2 {
> + reg = <2>;
> + io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +
> + quiet-therm@3 {
> + reg = <3>;
> + io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +};
> +
> &pm6150l_flash {
> status = "okay";
>
> @@ -405,6 +557,14 @@ led-0 {
> };
> };
>
> +&pm6150l_gpios {
> + pm6150l_adc_default: adc-default-state {
> + pins = "gpio7", "gpio10";
> + function = PMIC_GPIO_FUNC_NORMAL;
> + bias-high-impedance;
> + };
> +};
> +
> &pm6350_gpios {
> vol_down_n: vol-down-n-state {
> pins = "gpio2";
next prev parent reply other threads:[~2026-11-17 12:10 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 22:50 [PATCH v5 00/12] Enable more nodes for the Xperia 10 III erebion
2026-11-16 22:50 ` [PATCH v5 01/12] arm64: dts: qcom: sm6350-lena: Add flash LED erebion
2026-11-16 22:55 ` sashiko-bot
2026-11-16 23:04 ` erebion
2026-11-16 22:50 ` [PATCH v5 02/12] arm64: dts: qcom: sm6350-lena: rename touch-en-regulator erebion
2026-11-16 22:55 ` sashiko-bot
2026-11-16 23:06 ` erebion
2026-11-16 22:50 ` [PATCH v5 03/12] arm64: dts: qcom: sm6350-lena: Add qcom,rmtfs-mem node erebion
2026-11-16 22:55 ` sashiko-bot
2026-11-16 23:06 ` erebion
2026-11-16 22:50 ` [PATCH v5 04/12] arm64: dts: qcom: sm6350-lena: Enable ADSP, CDSP, IPA & MPSS erebion
2026-11-16 22:56 ` sashiko-bot
2026-11-16 23:06 ` erebion
2026-11-17 11:31 ` Luca Weiss
2026-11-16 22:50 ` [PATCH v5 05/12] arm64: dts: qcom: sm6350-lena: Enable Bluetooth erebion
2026-11-16 23:11 ` sashiko-bot
2026-11-16 23:17 ` erebion
2026-11-16 22:50 ` [PATCH v5 06/12] arm64: dts: qcom: sm6350-lena: Enable wifi erebion
2026-11-16 22:56 ` sashiko-bot
2026-11-16 23:06 ` erebion
2026-11-16 22:50 ` [PATCH v5 07/12] arm64: dts: qcom: sm6350-lena: Enable PM7250B erebion
2026-11-16 23:06 ` sashiko-bot
2026-11-16 23:06 ` erebion
2026-11-17 12:05 ` Luca Weiss
2026-11-16 22:50 ` [PATCH v5 08/12] arm64: dts: qcom: sm6350-lena: Enable PMK8350 erebion
2026-11-16 23:01 ` sashiko-bot
2026-11-16 23:07 ` erebion
2026-11-17 12:02 ` Luca Weiss
2026-11-16 22:50 ` [PATCH v5 09/12] arm64: dts: qcom: sm6350-lena: Add PM7250B thermals erebion
2026-11-16 23:03 ` sashiko-bot
2026-11-16 23:07 ` erebion
2026-11-17 12:06 ` Luca Weiss
2026-11-16 22:50 ` [PATCH v5 10/12] arm64: dts: qcom: sm6350-lena: Add PMK8350 thermals erebion
2026-11-16 23:00 ` sashiko-bot
2026-11-16 23:07 ` erebion
2026-11-17 12:08 ` Luca Weiss
2026-11-16 22:50 ` [PATCH v5 11/12] arm64: dts: qcom: sm6350-lena: Add PM6150L thermals erebion
2026-11-16 23:02 ` sashiko-bot
2026-11-16 23:07 ` erebion
2026-11-17 12:10 ` Luca Weiss [this message]
2026-11-16 22:50 ` [PATCH v5 12/12] arm64: dts: qcom: sm6350-lena: enable remaining i2c busses erebion
2026-11-16 22:59 ` sashiko-bot
2026-11-16 23:08 ` erebion
2026-11-17 12:11 ` Luca Weiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DMXH4DEA8NRH.2HZPS0S9ASHN9@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=erebion@erebion.eu \
--cc=jesszhan0024@gmail.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox