From: Mark Brown <broonie@kernel.org>
To: Varadarajan Narayanan <varada@codeaurora.org>
Cc: Matthew McClintock <mmcclint@codeaurora.org>,
Mark Brown <broonie@kernel.org>broonie@kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org,
david.brown@linaro.org, linux-spi@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.orgMatthew McClintock
<mmcclint@codeaurora.org>linux-spi@vger.kernel.org
Subject: Applied "spi: qup: call io_config in mode specific function" to the spi tree
Date: Tue, 08 Aug 2017 12:18:13 +0100 [thread overview]
Message-ID: <E1df2Wb-0006If-0G@finisterre> (raw)
In-Reply-To: <1501224781-19519-10-git-send-email-varada@codeaurora.org>
The patch
spi: qup: call io_config in mode specific function
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 3b5ea2c981dd470882bdc83e548dd15a942dbf4d Mon Sep 17 00:00:00 2001
From: Varadarajan Narayanan <varada@codeaurora.org>
Date: Fri, 28 Jul 2017 12:22:56 +0530
Subject: [PATCH] spi: qup: call io_config in mode specific function
DMA transactions should only only need to call io_config only once, but
block mode might call it several times to setup several transactions so
it can handle reads/writes larger than the max size per transaction, so
we move the call to the do_ functions.
This is just refactoring, there should be no functional change
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-qup.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index ff5aa08b5725..1aa60785bf98 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -156,6 +156,8 @@ struct spi_qup {
struct dma_slave_config tx_conf;
};
+static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer);
+
static inline bool spi_qup_is_flag_set(struct spi_qup *controller, u32 flag)
{
u32 opflag = readl_relaxed(controller->base + QUP_OPERATIONAL);
@@ -417,11 +419,12 @@ static void spi_qup_dma_terminate(struct spi_master *master,
dmaengine_terminate_all(master->dma_rx);
}
-static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
+static int spi_qup_do_dma(struct spi_device *spi, struct spi_transfer *xfer,
unsigned long timeout)
{
- struct spi_qup *qup = spi_master_get_devdata(master);
dma_async_tx_callback rx_done = NULL, tx_done = NULL;
+ struct spi_master *master = spi->master;
+ struct spi_qup *qup = spi_master_get_devdata(master);
int ret;
if (xfer->rx_buf)
@@ -429,6 +432,10 @@ static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
else if (xfer->tx_buf)
tx_done = spi_qup_dma_done;
+ ret = spi_qup_io_config(spi, xfer);
+ if (ret)
+ return ret;
+
/* before issuing the descriptors, set the QUP to run */
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
if (ret) {
@@ -459,12 +466,17 @@ static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
return 0;
}
-static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer,
+static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
unsigned long timeout)
{
+ struct spi_master *master = spi->master;
struct spi_qup *qup = spi_master_get_devdata(master);
int ret;
+ ret = spi_qup_io_config(spi, xfer);
+ if (ret)
+ return ret;
+
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
if (ret) {
dev_warn(qup->dev, "cannot set RUN state\n");
@@ -742,10 +754,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
if (ret)
return ret;
- ret = spi_qup_io_config(spi, xfer);
- if (ret)
- return ret;
-
timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
timeout = 100 * msecs_to_jiffies(timeout);
@@ -760,9 +768,9 @@ static int spi_qup_transfer_one(struct spi_master *master,
spin_unlock_irqrestore(&controller->lock, flags);
if (spi_qup_is_dma_xfer(controller->mode))
- ret = spi_qup_do_dma(master, xfer, timeout);
+ ret = spi_qup_do_dma(spi, xfer, timeout);
else
- ret = spi_qup_do_pio(master, xfer, timeout);
+ ret = spi_qup_do_pio(spi, xfer, timeout);
if (ret)
goto exit;
--
2.13.2
next prev parent reply other threads:[~2017-08-08 11:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-28 6:52 [PATCH v6 00/14] spi: qup: Fixes and add support for >64k transfers Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 01/14] spi: qup: Enable chip select support Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 02/14] spi: qup: Setup DMA mode correctly Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 03/14] spi: qup: Add completion timeout Varadarajan Narayanan
2017-08-08 11:18 ` Applied "spi: qup: Add completion timeout" to the spi tree Mark Brown
2017-07-28 6:52 ` [PATCH v6 04/14] spi: qup: Place the QUP in run mode before DMA Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 05/14] spi: qup: Fix error handling in spi_qup_prep_sg Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 06/14] spi: qup: Fix transaction done signaling Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 07/14] spi: qup: Do block sized read/write in block mode Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 08/14] spi: qup: refactor spi_qup_io_config into two functions Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 09/14] spi: qup: call io_config in mode specific function Varadarajan Narayanan
2017-08-08 11:18 ` Mark Brown [this message]
2017-07-28 6:52 ` [PATCH v6 10/14] spi: qup: allow block mode to generate multiple transactions Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 11/14] spi: qup: refactor spi_qup_prep_sg Varadarajan Narayanan
2017-07-28 6:52 ` [PATCH v6 12/14] spi: qup: allow multiple DMA transactions per spi xfer Varadarajan Narayanan
[not found] ` <1501224781-19519-13-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-08-08 11:18 ` Applied "spi: qup: allow multiple DMA transactions per spi xfer" to the spi tree Mark Brown
2017-07-28 6:53 ` [PATCH v6 13/14] spi: qup: Ensure done detection Varadarajan Narayanan
2017-07-28 6:53 ` [PATCH v6 14/14] spi: qup: Fix QUP version identify method Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1df2Wb-0006If-0G@finisterre \
--to=broonie@kernel.org \
--cc=mmcclint@codeaurora.org \
--cc=varada@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox