From: Mark Brown <broonie@kernel.org>
To: Varadarajan Narayanan <varada@codeaurora.org>
Cc: Matthew McClintock <mmcclint@codeaurora.org>,
Mark Brown <broonie@kernel.org>broonie@kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org,
david.brown@linaro.org, linux-spi@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.orgMatthew McClintock
<mmcclint@codeaurora.org>linux-spi@vger.kernel.org
Subject: Applied "spi: qup: refactor spi_qup_io_config into two functions" to the spi tree
Date: Tue, 08 Aug 2017 12:18:16 +0100 [thread overview]
Message-ID: <E1df2We-0006Jk-Po@finisterre> (raw)
In-Reply-To: <1500882445-29008-9-git-send-email-varada@codeaurora.org>
The patch
spi: qup: refactor spi_qup_io_config into two functions
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 94b9149febddcd367de75d2706a32183e2abbaa7 Mon Sep 17 00:00:00 2001
From: Varadarajan Narayanan <varada@codeaurora.org>
Date: Fri, 28 Jul 2017 12:22:55 +0530
Subject: [PATCH] spi: qup: refactor spi_qup_io_config into two functions
This is in preparation for handling transactions larger than
64K-1 bytes in block mode, which is currently unsupported and
quietly fails.
We need to break these into two functions 1) prep is
called once per spi_message and 2) io_config is called
once per spi-qup bus transaction
This is just refactoring, there should be no functional
change
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-qup.c | 91 +++++++++++++++++++++++++++++++++++----------------
1 file changed, 62 insertions(+), 29 deletions(-)
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 8cfa112bb142..ff5aa08b5725 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -545,12 +545,11 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-/* set clock freq ... bits per word */
-static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+/* set clock freq ... bits per word, determine mode */
+static int spi_qup_io_prep(struct spi_device *spi, struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
- u32 config, iomode, control;
- int ret, n_words;
+ int ret;
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
dev_err(controller->dev, "too big size for loopback %d > %d\n",
@@ -565,32 +564,56 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
return -EIO;
}
- if (spi_qup_set_state(controller, QUP_STATE_RESET)) {
- dev_err(controller->dev, "cannot set RESET state\n");
- return -EIO;
- }
-
controller->w_size = DIV_ROUND_UP(xfer->bits_per_word, 8);
controller->n_words = xfer->len / controller->w_size;
- n_words = controller->n_words;
-
- if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
+ if (controller->n_words <= (controller->in_fifo_sz / sizeof(u32)))
controller->mode = QUP_IO_M_MODE_FIFO;
+ else if (spi->master->can_dma &&
+ spi->master->can_dma(spi->master, spi, xfer) &&
+ spi->master->cur_msg_mapped)
+ controller->mode = QUP_IO_M_MODE_BAM;
+ else
+ controller->mode = QUP_IO_M_MODE_BLOCK;
+
+ return 0;
+}
+
+/* prep qup for another spi transaction of specific type */
+static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+{
+ struct spi_qup *controller = spi_master_get_devdata(spi->master);
+ u32 config, iomode, control;
+ unsigned long flags;
+
+ spin_lock_irqsave(&controller->lock, flags);
+ controller->xfer = xfer;
+ controller->error = 0;
+ controller->rx_bytes = 0;
+ controller->tx_bytes = 0;
+ spin_unlock_irqrestore(&controller->lock, flags);
+
+
+ if (spi_qup_set_state(controller, QUP_STATE_RESET)) {
+ dev_err(controller->dev, "cannot set RESET state\n");
+ return -EIO;
+ }
- writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
- writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
+ switch (controller->mode) {
+ case QUP_IO_M_MODE_FIFO:
+ writel_relaxed(controller->n_words,
+ controller->base + QUP_MX_READ_CNT);
+ writel_relaxed(controller->n_words,
+ controller->base + QUP_MX_WRITE_CNT);
/* must be zero for FIFO */
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
- } else if (spi->master->can_dma &&
- spi->master->can_dma(spi->master, spi, xfer) &&
- spi->master->cur_msg_mapped) {
-
- controller->mode = QUP_IO_M_MODE_BAM;
-
- writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
- writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
+ break;
+ case QUP_IO_M_MODE_BAM:
+ writel_relaxed(controller->n_words,
+ controller->base + QUP_MX_INPUT_CNT);
+ writel_relaxed(controller->n_words,
+ controller->base + QUP_MX_OUTPUT_CNT);
/* must be zero for BLOCK and BAM */
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
@@ -608,19 +631,25 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
if (xfer->tx_buf)
writel_relaxed(0, input_cnt);
else
- writel_relaxed(n_words, input_cnt);
+ writel_relaxed(controller->n_words, input_cnt);
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
}
- } else {
-
- controller->mode = QUP_IO_M_MODE_BLOCK;
-
- writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
- writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
+ break;
+ case QUP_IO_M_MODE_BLOCK:
+ reinit_completion(&controller->done);
+ writel_relaxed(controller->n_words,
+ controller->base + QUP_MX_INPUT_CNT);
+ writel_relaxed(controller->n_words,
+ controller->base + QUP_MX_OUTPUT_CNT);
/* must be zero for BLOCK and BAM */
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
+ break;
+ default:
+ dev_err(controller->dev, "unknown mode = %d\n",
+ controller->mode);
+ return -EIO;
}
iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
@@ -709,6 +738,10 @@ static int spi_qup_transfer_one(struct spi_master *master,
unsigned long timeout, flags;
int ret = -EIO;
+ ret = spi_qup_io_prep(spi, xfer);
+ if (ret)
+ return ret;
+
ret = spi_qup_io_config(spi, xfer);
if (ret)
return ret;
--
2.13.2
next prev parent reply other threads:[~2017-08-08 11:18 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-24 7:47 [PATCH v5 00/14] spi: qup: Fixes and add support for >64k transfers Varadarajan Narayanan
2017-07-24 7:47 ` [PATCH v5 01/14] spi: qup: Enable chip select support Varadarajan Narayanan
[not found] ` <1500882445-29008-1-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-07-24 7:47 ` [PATCH v5 02/14] spi: qup: Setup DMA mode correctly Varadarajan Narayanan
2017-07-24 7:47 ` [PATCH v5 03/14] spi: qup: Add completion timeout Varadarajan Narayanan
2017-07-27 8:30 ` kbuild test robot
2017-07-24 7:47 ` [PATCH v5 05/14] spi: qup: Fix error handling in spi_qup_prep_sg Varadarajan Narayanan
2017-08-08 11:18 ` Applied "spi: qup: Fix error handling in spi_qup_prep_sg" to the spi tree Mark Brown
2017-07-24 7:47 ` [PATCH v5 07/14] spi: qup: Do block sized read/write in block mode Varadarajan Narayanan
2017-08-08 11:18 ` Applied "spi: qup: Do block sized read/write in block mode" to the spi tree Mark Brown
2017-07-24 7:47 ` [PATCH v5 09/14] spi: qup: call io_config in mode specific function Varadarajan Narayanan
2017-07-24 7:47 ` [PATCH v5 10/14] spi: qup: allow block mode to generate multiple transactions Varadarajan Narayanan
2017-08-08 11:18 ` Applied "spi: qup: allow block mode to generate multiple transactions" to the spi tree Mark Brown
2017-07-24 7:47 ` [PATCH v5 11/14] spi: qup: refactor spi_qup_prep_sg Varadarajan Narayanan
2017-08-08 11:18 ` Applied "spi: qup: refactor spi_qup_prep_sg" to the spi tree Mark Brown
2017-07-24 7:47 ` [PATCH v5 12/14] spi: qup: allow multiple DMA transactions per spi xfer Varadarajan Narayanan
2017-07-24 7:47 ` [PATCH v5 04/14] spi: qup: Place the QUP in run mode before DMA Varadarajan Narayanan
2017-08-08 11:18 ` Applied "spi: qup: Place the QUP in run mode before DMA" to the spi tree Mark Brown
2017-07-24 7:47 ` [PATCH v5 06/14] spi: qup: Fix transaction done signaling Varadarajan Narayanan
2017-07-24 7:47 ` [PATCH v5 08/14] spi: qup: refactor spi_qup_io_config into two functions Varadarajan Narayanan
2017-08-08 11:18 ` Mark Brown [this message]
2017-07-24 7:47 ` [PATCH v5 13/14] spi: qup: Ensure done detection Varadarajan Narayanan
2017-07-24 7:47 ` [PATCH v5 14/14] spi: qup: Fix QUP version identify method Varadarajan Narayanan
[not found] ` <1500882445-29008-15-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-07-25 2:52 ` kbuild test robot
2017-08-08 11:17 ` Applied "spi: qup: Fix QUP version identify method" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1df2We-0006Jk-Po@finisterre \
--to=broonie@kernel.org \
--cc=mmcclint@codeaurora.org \
--cc=varada@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).