[PATCH 3/4] ARM: dts: vf610-zii-dev-rev-b: add PHYs for switch2

[Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>]

Switch 2 has an 88e1545 PHY behind it, which is a quad PHY.  Only the
first three PHYs are used, the remaining PHY is unused.  When we wire
up the SFF sockets in a later commit, the omission of this causes the
fourth PHY to be used for port 3.  Specifying the PHYs in DT avoids
the auto-probing of the bus, and discovery of this PHY.

Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index ede8649ba515..782b69a3acdf 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -255,16 +255,19 @@
 					port@0 {
 						reg = <0>;
 						label = "lan6";
+						phy-handle = <&switch2phy0>;
 					};
 
 					port@1 {
 						reg = <1>;
 						label = "lan7";
+						phy-handle = <&switch2phy1>;
 					};
 
 					port@2 {
 						reg = <2>;
 						label = "lan8";
+						phy-handle = <&switch2phy2>;
 					};
 
 					port@3 {
@@ -304,6 +307,20 @@
 						};
 					};
 				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch2phy0: phy@0 {
+						reg = <0>;
+					};
+					switch2phy1: phy@1 {
+						reg = <1>;
+					};
+					switch2phy2: phy@2 {
+						reg = <2>;
+					};
+				};
 			};
 		};
 
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html