From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Brown Subject: Applied "dt-bindings: qcom_spmi: Document SAW support" to the regulator tree Date: Thu, 24 May 2018 20:25:37 +0100 Message-ID: References: <1520166709-554-3-git-send-email-ilialin@codeaurora.org> Return-path: In-Reply-To: <1520166709-554-3-git-send-email-ilialin@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org Cc: Mark Brown , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, lgirdwood@gmail.combroonie@kernel.org, robh@kernel.org, mark.rutland@arm.com, ilialin@codeaurora.org, amit.kucheria@linaro.org, nicolas.dechesne@linaro.org, celster@codeaurora.org, tfinkel@codeaurora.orglinux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The patch dt-bindings: qcom_spmi: Document SAW support has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From f50e5ddae899d1599e4d6ccb46eadd78b7ed14bc Mon Sep 17 00:00:00 2001 From: Ilia Lin Date: Mon, 21 May 2018 14:25:31 +0300 Subject: [PATCH] dt-bindings: qcom_spmi: Document SAW support Document the DT bindings for the SAW regulators. The saw-leader is the only property that is configurable in DT. The saw-slave property allows ganging (grouping) of several regulators so that their outputs can be combined. Signed-off-by: Ilia Lin Reviewed-by: Rob Herring Signed-off-by: Mark Brown --- .../regulator/qcom,spmi-regulator.txt | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index 57d2c65899df..406f2e570c50 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -110,6 +110,11 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- qcom,saw-reg: + Usage: optional + Value type: + Description: Reference to syscon node defining the SAW registers. + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each @@ -201,6 +206,17 @@ see regulator.txt - with additional custom properties described below: 2 = 0.55 uA 3 = 0.75 uA +- qcom,saw-slave: + Usage: optional + Value type: + Description: SAW controlled gang slave. Will not be configured. + +- qcom,saw-leader: + Usage: optional + Value type: + Description: SAW controlled gang leader. Will be configured as + SAW regulator. + Example: regulators { @@ -221,3 +237,32 @@ Example: .... }; + +Example 2: + + saw3: syscon@9A10000 { + compatible = "syscon"; + reg = <0x9A10000 0x1000>; + }; + + ... + + spm-regulators { + compatible = "qcom,pm8994-regulators"; + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + pm8994_s11_saw: s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1140000>; + }; + }; -- 2.17.0