From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Mark Brown <broonie@kernel.org>,
linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] regulator: qcom-rpmh: Add support for SDX55
Date: Thu, 26 Nov 2020 11:35:48 -0600 [thread overview]
Message-ID: <X7/ndJsUbRkdmQPq@builder.lan> (raw)
In-Reply-To: <20201126093018.1085594-2-vkoul@kernel.org>
On Thu 26 Nov 03:30 CST 2020, Vinod Koul wrote:
> Add support from RPMH regulators found in SDX55 platform
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> drivers/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index d488325499a9..e673d48b31a1 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -930,6 +930,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
> {},
> };
>
> +static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps510, "vdd-s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"),
> + RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"),
> + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
> + RPMH_VREG("smps7", "smp%s7", &pmic5_hfsmps510, "vdd-s7"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l9"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4-l12"),
> + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo, "vdd-l7-l8"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l7-l8"),
> + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l3-l9"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l10-l11-l13"),
> + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l10-l11-l13"),
> + RPMH_VREG("ldo12", "ldo%s12", &pmic5_nldo, "vdd-l4-l12"),
> + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l10-l11-l13"),
> + RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo, "vdd-l14"),
> + RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l15"),
> + RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l16"),
> + {},
> +};
> +
> static int rpmh_regulator_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -1000,6 +1027,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
> .compatible = "qcom,pm6150l-rpmh-regulators",
> .data = pm6150l_vreg_data,
> },
> + {
> + .compatible = "qcom,pmx55-rpmh-regulators",
> + .data = pmx55_vreg_data,
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
> --
> 2.26.2
>
next prev parent reply other threads:[~2020-11-26 17:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-26 9:30 [PATCH 1/2] regulator: dt-bindings: Add PMX55 compatibles Vinod Koul
2020-11-26 9:30 ` [PATCH 2/2] regulator: qcom-rpmh: Add support for SDX55 Vinod Koul
2020-11-26 17:35 ` Bjorn Andersson [this message]
2020-11-26 17:35 ` [PATCH 1/2] regulator: dt-bindings: Add PMX55 compatibles Bjorn Andersson
2020-11-26 20:06 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X7/ndJsUbRkdmQPq@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).