From: Vinod Koul <vkoul@kernel.org>
To: Joy Zou <joy.zou@nxp.com>
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, shengjiu.wang@nxp.com,
martink@posteo.de, dev@lynxeye.de,
alexander.stein@ew.tq-group.com, peng.fan@nxp.com, david@ixit.cz,
aford173@gmail.com, hongxing.zhu@nxp.com, linux-imx@nxp.com,
dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 2/4] dmaengine: imx-sdma: support hdmi audio
Date: Wed, 19 Oct 2022 19:54:53 +0530 [thread overview]
Message-ID: <Y1AIte+S1sHw2qju@matsya> (raw)
In-Reply-To: <20220906094256.3787384-3-joy.zou@nxp.com>
On 06-09-22, 17:42, Joy Zou wrote:
> Add hdmi audio support in sdma.
Pls add description in changelog about what it takes to enabled hdmi
(cyclic support etc)
>
> Signed-off-by: Joy Zou <joy.zou@nxp.com>
> ---
> drivers/dma/imx-sdma.c | 38 +++++++++++++++++++++++++++++--------
> include/linux/dma/imx-dma.h | 1 +
> 2 files changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index fbea5f62dd98..ab877ceeac3f 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -954,7 +954,10 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
> desc = sdmac->desc;
> if (desc) {
> if (sdmac->flags & IMX_DMA_SG_LOOP) {
> - sdma_update_channel_loop(sdmac);
> + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> + sdma_update_channel_loop(sdmac);
> + else
> + vchan_cyclic_callback(&desc->vd);
> } else {
> mxc_sdma_handle_channel_normal(sdmac);
> vchan_cookie_complete(&desc->vd);
> @@ -1074,6 +1077,10 @@ static int sdma_get_pc(struct sdma_channel *sdmac,
> per_2_emi = sdma->script_addrs->sai_2_mcu_addr;
> emi_2_per = sdma->script_addrs->mcu_2_sai_addr;
> break;
> + case IMX_DMATYPE_HDMI:
> + emi_2_per = sdma->script_addrs->hdmi_dma_addr;
> + sdmac->is_ram_script = true;
> + break;
> default:
> dev_err(sdma->dev, "Unsupported transfer type %d\n",
> peripheral_type);
> @@ -1125,11 +1132,16 @@ static int sdma_load_context(struct sdma_channel *sdmac)
> /* Send by context the event mask,base address for peripheral
> * and watermark level
> */
> - context->gReg[0] = sdmac->event_mask[1];
> - context->gReg[1] = sdmac->event_mask[0];
> - context->gReg[2] = sdmac->per_addr;
> - context->gReg[6] = sdmac->shp_addr;
> - context->gReg[7] = sdmac->watermark_level;
> + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> + context->gReg[4] = sdmac->per_addr;
> + context->gReg[6] = sdmac->shp_addr;
> + } else {
> + context->gReg[0] = sdmac->event_mask[1];
> + context->gReg[1] = sdmac->event_mask[0];
> + context->gReg[2] = sdmac->per_addr;
> + context->gReg[6] = sdmac->shp_addr;
> + context->gReg[7] = sdmac->watermark_level;
> + }
>
> bd0->mode.command = C0_SETDM;
> bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD;
> @@ -1513,7 +1525,7 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
> desc->sdmac = sdmac;
> desc->num_bd = bds;
>
> - if (sdma_alloc_bd(desc))
> + if (bds && sdma_alloc_bd(desc))
> goto err_desc_out;
>
> /* No slave_config called in MEMCPY case, so do here */
> @@ -1678,13 +1690,16 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
> {
> struct sdma_channel *sdmac = to_sdma_chan(chan);
> struct sdma_engine *sdma = sdmac->sdma;
> - int num_periods = buf_len / period_len;
> + int num_periods = 0;
> int channel = sdmac->channel;
> int i = 0, buf = 0;
> struct sdma_desc *desc;
>
> dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
>
> + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> + num_periods = buf_len / period_len;
> +
> sdma_config_write(chan, &sdmac->slave_config, direction);
>
> desc = sdma_transfer_init(sdmac, direction, num_periods);
> @@ -1701,6 +1716,9 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
> goto err_bd_out;
> }
>
> + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI)
> + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
> +
> while (buf < buf_len) {
> struct sdma_buffer_descriptor *bd = &desc->bd[i];
> int param;
> @@ -1761,6 +1779,10 @@ static int sdma_config_write(struct dma_chan *chan,
> sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) &
> SDMA_WATERMARK_LEVEL_HWML;
> sdmac->word_size = dmaengine_cfg->dst_addr_width;
> + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> + sdmac->per_address = dmaengine_cfg->dst_addr;
> + sdmac->per_address2 = dmaengine_cfg->src_addr;
> + sdmac->watermark_level = 0;
> } else {
> sdmac->per_address = dmaengine_cfg->dst_addr;
> sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
> diff --git a/include/linux/dma/imx-dma.h b/include/linux/dma/imx-dma.h
> index f487a4fa103a..cfec5f946e23 100644
> --- a/include/linux/dma/imx-dma.h
> +++ b/include/linux/dma/imx-dma.h
> @@ -40,6 +40,7 @@ enum sdma_peripheral_type {
> IMX_DMATYPE_ASRC_SP, /* Shared ASRC */
> IMX_DMATYPE_SAI, /* SAI */
> IMX_DMATYPE_MULTI_SAI, /* MULTI FIFOs For Audio */
> + IMX_DMATYPE_HDMI, /* HDMI Audio */
> };
>
> enum imx_dma_prio {
> --
> 2.37.1
--
~Vinod
next prev parent reply other threads:[~2022-10-19 14:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-06 9:42 [PATCH v6 0/4] dmaengine: sdma support hdmi audio Joy Zou
2022-09-06 9:42 ` [PATCH v6 1/4] dt-bindings: fsl-imx-sdma: Convert imx sdma to DT schema Joy Zou
2022-09-06 10:55 ` Alexander Stein
2022-09-06 11:13 ` [EXT] " Joy Zou
2022-09-06 16:25 ` Rob Herring
2022-09-07 6:48 ` Joy Zou
2022-09-07 11:12 ` Krzysztof Kozlowski
2022-09-06 9:42 ` [PATCH v6 2/4] dmaengine: imx-sdma: support hdmi audio Joy Zou
2022-10-19 14:24 ` Vinod Koul [this message]
2022-10-20 10:19 ` [EXT] " Joy Zou
2022-09-06 9:42 ` [PATCH v6 3/4] ARM: dts: imx: update sdma node name format Joy Zou
2022-09-06 9:42 ` [PATCH v6 4/4] arm64: dts: imx8mq: " Joy Zou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y1AIte+S1sHw2qju@matsya \
--to=vkoul@kernel.org \
--cc=aford173@gmail.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=david@ixit.cz \
--cc=dev@lynxeye.de \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=joy.zou@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=martink@posteo.de \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).