From: Bagas Sanjaya <bagasdotme@gmail.com>
To: Billy Tsai <billy_tsai@aspeedtech.com>
Cc: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, joel@jms.id.au,
andrew@aj.id.au, lee@kernel.org, thierry.reding@gmail.com,
u.kleine-koenig@pengutronix.de, corbet@lwn.net,
p.zabel@pengutronix.de, linux-hwmon@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-doc@vger.kernel.org,
kernel test robot <lkp@intel.com>
Subject: Re: [v4 5/5] hwmon: Add Aspeed ast2600 TACH support
Date: Wed, 23 Nov 2022 15:45:46 +0700 [thread overview]
Message-ID: <Y33duvUVQ0AJsgAv@debian.me> (raw)
In-Reply-To: <20221123061635.32025-6-billy_tsai@aspeedtech.com>
[-- Attachment #1: Type: text/plain, Size: 2888 bytes --]
On Wed, Nov 23, 2022 at 02:16:35PM +0800, Billy Tsai wrote:
> diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst
> new file mode 100644
> index 000000000000..4f9501b783a1
> --- /dev/null
> +++ b/Documentation/hwmon/tach-aspeed-ast2600.rst
> @@ -0,0 +1,24 @@
> +Kernel driver tach-aspeed-ast2600
> +==============================
> +
> +Supported chips:
> + ASPEED AST2600
> +
> +Authors:
> + <billy_tsai@aspeedtech.com>
> +
> +Description:
> +------------
> +This driver implements support for ASPEED AST2600 Fan Tacho controller.
> +The controller supports up to 16 tachometer inputs.
> +
> +The driver provides the following sensor accesses in sysfs:
> +=============== ======= =====================================================
> +fanX_input ro provide current fan rotation value in RPM as reported
> + by the fan to the device.
> +fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16
> + 64, ... 4194304)
> + The larger divisor, the less rpm accuracy and the less
> + affected by fan signal glitch.
> +fanX_pulses rw Fan pulses per resolution.
> +=============== ======= ======================================================
I found htmldocs warnings:
Documentation/hwmon/tach-aspeed-ast2600.rst:2: WARNING: Title underline too short.
Kernel driver tach-aspeed-ast2600
==============================
Documentation/hwmon/tach-aspeed-ast2600.rst:18: WARNING: Unexpected indentation.
Documentation/hwmon/tach-aspeed-ast2600.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/hwmon/tach-aspeed-ast2600.rst:23: WARNING: Definition list ends without a blank line; unexpected unindent.
I have applied the fixup:
---- >8 ----
diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst
index 4f9501b783a11b..8faa00f6ad47c2 100644
--- a/Documentation/hwmon/tach-aspeed-ast2600.rst
+++ b/Documentation/hwmon/tach-aspeed-ast2600.rst
@@ -1,5 +1,5 @@
Kernel driver tach-aspeed-ast2600
-==============================
+=================================
Supported chips:
ASPEED AST2600
@@ -13,7 +13,8 @@ This driver implements support for ASPEED AST2600 Fan Tacho controller.
The controller supports up to 16 tachometer inputs.
The driver provides the following sensor accesses in sysfs:
-=============== ======= =====================================================
+
+=============== ======= ======================================================
fanX_input ro provide current fan rotation value in RPM as reported
by the fan to the device.
fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16
Thanks.
--
An old man doll... just what I always wanted! - Clara
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2022-11-23 8:45 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 6:16 [v4 0/5] Support pwm/tach driver for aspeed ast26xx Billy Tsai
2022-11-23 6:16 ` [v4 1/5] dt-bindings: mfd: Add aspeed pwm-tach binding Billy Tsai
2022-11-23 8:24 ` Krzysztof Kozlowski
2022-11-23 8:27 ` Krzysztof Kozlowski
2022-12-09 0:54 ` Billy Tsai
2022-12-09 7:48 ` Krzysztof Kozlowski
2023-01-06 3:31 ` Billy Tsai
2023-06-08 6:43 ` Krzysztof Kozlowski
[not found] ` <SG2PR06MB3365AE9D075601CB62C6E7F78B50A@SG2PR06MB3365.apcprd06.prod.outlook.com>
2023-06-08 7:20 ` Krzysztof Kozlowski
2022-11-23 15:07 ` Rob Herring
2022-11-23 6:16 ` [v4 2/5] dt-bindings: pwm: Add bindings for aspeed pwm controller Billy Tsai
2022-11-23 8:30 ` Krzysztof Kozlowski
2022-11-23 15:07 ` Rob Herring
2022-11-23 6:16 ` [v4 3/5] dt-bindings: hwmon: Add bindings for aspeed tach controller Billy Tsai
2022-11-23 8:33 ` Krzysztof Kozlowski
2022-11-23 15:21 ` Guenter Roeck
2022-11-23 6:16 ` [v4 4/5] pwm: Add Aspeed ast2600 PWM support Billy Tsai
2022-11-23 8:43 ` Bagas Sanjaya
2023-04-24 10:12 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2022-11-23 6:16 ` [v4 5/5] hwmon: Add Aspeed ast2600 TACH support Billy Tsai
2022-11-23 8:45 ` Bagas Sanjaya [this message]
2022-11-23 15:44 ` Guenter Roeck
2022-11-29 7:08 ` Billy Tsai
2022-11-29 15:06 ` Guenter Roeck
2023-01-17 21:48 ` [v4 0/5] Support pwm/tach driver for aspeed ast26xx Uwe Kleine-König
2023-01-18 1:48 ` Billy Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y33duvUVQ0AJsgAv@debian.me \
--to=bagasdotme@gmail.com \
--cc=andrew@aj.id.au \
--cc=billy_tsai@aspeedtech.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lkp@intel.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).