From: Matthias Kaehlcke <mka@chromium.org>
To: Owen Yang <ecs.taipeikernel@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Stephen Boyd <swboyd@chromium.org>, Harvey <hunge@google.com>,
Bob Moragues <moragues@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
Date: Wed, 23 Nov 2022 14:39:51 +0000 [thread overview]
Message-ID: <Y34wtwSlqc0y4Msz@google.com> (raw)
In-Reply-To: <20221123181043.2.Ie435b31225d2dc284a34ac8e52fb84fffb39488c@changeid>
On Wed, Nov 23, 2022 at 06:11:13PM +0800, Owen Yang wrote:
> Subject: [2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
Please in include a version number for versions >1. If my accounting is correct
this is v3, so the next iteration should be v4.
You mentioned earlier that you are using patman. Add the following tag to
one of the patches in the series to get the version included in the subject:
Series-version: 4
> Add DT for sc7280-herobrine-zombie
>
> Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
> ---
Where is the change log that I requested for v2? A change log helps reviewers to
focus their attention and can save them time by allowing them to skip parts they
already have reviewed.
Again patman can come to your help:
Commit-changes: 2
- <change 1>
- <change 2>
Commit-changes: 3
- none (<= example)
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../dts/qcom/sc7280-herobrine-zombie-lte.dts | 15 +
> .../boot/dts/qcom/sc7280-herobrine-zombie.dts | 15 +
> .../dts/qcom/sc7280-herobrine-zombie.dtsi | 310 ++++++++++++++++++
> 4 files changed, 342 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index afe496a93f94..7b0644a39062 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -114,6 +114,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
> new file mode 100644
> index 000000000000..2f1da87e5005
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Zombie board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
nit: add an empty line here
> +/dts-v1/;
> +
> +#include "sc7280-herobrine-zombie.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Zombie with LTE";
> + compatible = "google,zombie-sku512", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
> new file mode 100644
> index 000000000000..3fa3d441991e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Zombie board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
You deleted an empty line here, instead of removing the unnecessary '/dts-v1/;'
entry from the .dtsi as requested.
> +/dts-v1/;
> +
> +#include "sc7280-herobrine-zombie.dtsi"
> +#include "sc7280-herobrine-wifi-sku.dtsi"
> +
> +/ {
> + model = "Google Zombie";
> + compatible = "google,zombie", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
> new file mode 100644
> index 000000000000..15832620ff5d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
> @@ -0,0 +1,310 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Zombie board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +/dts-v1/;
Please drop the above line as requested in the review of v2.
next prev parent reply other threads:[~2022-11-23 14:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 10:11 [PATCH 1/2] dt-bindings: arm: qcom: Adding DT binding for zombie Owen Yang
2022-11-23 10:11 ` [PATCH 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie Owen Yang
2022-11-23 14:39 ` Matthias Kaehlcke [this message]
2022-11-23 14:58 ` Krzysztof Kozlowski
2022-11-23 15:16 ` Matthias Kaehlcke
2022-11-23 10:34 ` [PATCH 1/2] dt-bindings: arm: qcom: Adding DT binding for zombie Krzysztof Kozlowski
2022-11-23 14:23 ` Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y34wtwSlqc0y4Msz@google.com \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=ecs.taipeikernel@gmail.com \
--cc=hunge@google.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=moragues@chromium.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).