From: Conor Dooley <conor@kernel.org>
To: Samuel Holland <samuel@sholland.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
linux-sunxi@lists.linux.dev, Palmer Dabbelt <palmer@dabbelt.com>,
linux-riscv@lists.infradead.org,
Jisheng Zhang <jszhang@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-arm-kernel@lists.infradead.org,
Andre Przywara <andre.przywara@arm.com>
Subject: Re: [PATCH v3 00/12] riscv: Allwinner D1/D1s platform support
Date: Sat, 17 Dec 2022 17:43:10 +0000 [thread overview]
Message-ID: <Y53/ruLoggBDXozF@spud> (raw)
In-Reply-To: <20221208090237.20572-1-samuel@sholland.org>
[-- Attachment #1: Type: text/plain, Size: 7680 bytes --]
On Thu, Dec 08, 2022 at 03:02:25AM -0600, Samuel Holland wrote:
> This series adds the Kconfig/defconfig plumbing and devicetrees for a
> range of Allwinner D1 and D1s-based boards. Many features are already
> enabled, including USB, Ethernet, and WiFi.
>
> The devicetrees use bindings from the following series which have not
> yet been merged to linux-next:
> - In-package LDO regulators:
> https://lore.kernel.org/lkml/20221208084127.17443-1-samuel@sholland.org/
> - Ethernet MAC binding fix (not a new issue with D1):
> https://lore.kernel.org/lkml/20221208061616.7806-1-samuel@sholland.org/
> - TI ADC101C ADC (accepted, not yet in linux-next):
> https://lore.kernel.org/lkml/20221125220903.8632-1-samuel@sholland.org/
>
> The only remaining DT validation issue is that gpio-fan is missing a
> YAML conversion, although one is on the list here:
> https://lore.kernel.org/lkml/20220126200350.3633576-1-clabbe@baylibre.com/
With the above 4 in next:
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Corentin's patch looked like it needed only minor changes. I shall go
ping it :)
>
> $ make ARCH=riscv CROSS_COMPILE=riscv64-linux-musl- dtbs_check
> SYNC include/config/auto.conf.cmd
> LINT Documentation/devicetree/bindings
> CHKDT Documentation/devicetree/bindings/processed-schema.json
> SCHEMA Documentation/devicetree/bindings/processed-schema.json
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dtb
> DTC_CHK arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dtb
> arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dtb:0:0: /fan: failed to match any schema with compatible: ['gpio-fan']
>
> Note that validation requires dt-schema v2022.12 or newer.
>
> I tested this series (DMIC, Ethernet, LEDs, MMC, PMIC, touch, and USB,
> all where available) on the following boards:
> - sun20i-d1-devterm-v3.14
> - sun20i-d1-dongshan-nezha-stu
> - sun20i-d1-lichee-rv-86-panel-480p
> - sun20i-d1-mangopi-mq-pro
> - sun20i-d1-nezha
> - sun20i-d1s-mangopi-mq
>
> Changes in v3:
> - Drop dummy DCXO clock-frequency property
> - Decrease the PLIC's riscv,ndev property to 175
> - Fix `make W=1 dtbs` warnings (unnecessary #address/#size-cells)
> - Drop mmc aliases
> - Change LED_FUNCTION_BACKLIGHT to LED_FUNCTION_STATUS (the backlight
> regulator is disconnected by default, so this is a standalone LED)
> - Fix `make W=1 dtbs` warnings (missing reg properties)
> - ARCH_SUNXI depends on MMU && !XIP_KERNEL
>
> Changes in v2:
> - Add MangoPi MQ (non-Pro) board
> - Split into separate files for sharing with D1s/R528/T113
> - Use SOC_PERIPHERAL_IRQ macro for interrupts
> - Rename osc24M to dcxo and move the frequency to the board DTs
> - Drop analog LDOs due to the missing binding
> - Correct tcon_top DSI clock reference
> - Add DMIC, DSI controller, and DPHY (bindings are in linux-next)
> - Add CPU OPP table
> - Common regulators moved to MangoPi MQ patch, removed analog LDOs
> - Removed LRADC (depends on analog LDOs)
> - Added XR829 host-wake interrupt
> - Added DMIC sound card to Lichee RV dock and Lichee RV 86 Panel
> - Removed LRADC (depends on analog LDOs)
> - Added LED (GPIO shared between onboard LED and backlight regulator)
> - Added PMIC GPIO controller node (binding merged for 6.2)
> - Sort Kconfig as if we had done s/SOC_/ARCH_/ for future-proofing
>
> Samuel Holland (12):
> MAINTAINERS: Match the sun20i family of Allwinner SoCs
> dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors
> dt-bindings: riscv: Add Allwinner D1/D1s board compatibles
> riscv: dts: allwinner: Add the D1/D1s SoC devicetree
> riscv: dts: allwinner: Add MangoPi MQ devicetree
> riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
> riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees
> riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
> riscv: dts: allwinner: Add Dongshan Nezha STU devicetree
> riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees
> riscv: Add the Allwinner SoC family Kconfig option
> riscv: defconfig: Enable the Allwinner D1 platform and drivers
>
> .../devicetree/bindings/riscv/sunxi.yaml | 69 ++
> .../devicetree/bindings/vendor-prefixes.yaml | 4 +
> MAINTAINERS | 2 +-
> arch/riscv/Kconfig.socs | 10 +
> arch/riscv/boot/dts/Makefile | 1 +
> arch/riscv/boot/dts/allwinner/Makefile | 11 +
> .../allwinner/sun20i-common-regulators.dtsi | 35 +
> .../allwinner/sun20i-d1-clockworkpi-v3.14.dts | 252 ++++++
> .../dts/allwinner/sun20i-d1-devterm-v3.14.dts | 36 +
> .../sun20i-d1-dongshan-nezha-stu.dts | 117 +++
> .../sun20i-d1-lichee-rv-86-panel-480p.dts | 29 +
> .../sun20i-d1-lichee-rv-86-panel-720p.dts | 10 +
> .../sun20i-d1-lichee-rv-86-panel.dtsi | 119 +++
> .../allwinner/sun20i-d1-lichee-rv-dock.dts | 97 ++
> .../dts/allwinner/sun20i-d1-lichee-rv.dts | 87 ++
> .../allwinner/sun20i-d1-mangopi-mq-pro.dts | 142 +++
> .../boot/dts/allwinner/sun20i-d1-nezha.dts | 166 ++++
> arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 66 ++
> .../dts/allwinner/sun20i-d1s-mangopi-mq.dts | 134 +++
> arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 76 ++
> .../boot/dts/allwinner/sunxi-d1-t113.dtsi | 15 +
> .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 837 ++++++++++++++++++
> arch/riscv/configs/defconfig | 22 +-
> 23 files changed, 2335 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/riscv/sunxi.yaml
> create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-clockworkpi-v3.14.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
> create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
> create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
>
> --
> 2.37.4
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2022-12-17 17:43 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-08 9:02 [PATCH v3 00/12] riscv: Allwinner D1/D1s platform support Samuel Holland
2022-12-08 9:02 ` [PATCH v3 01/12] MAINTAINERS: Match the sun20i family of Allwinner SoCs Samuel Holland
2022-12-08 9:02 ` [PATCH v3 02/12] dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors Samuel Holland
2022-12-08 9:02 ` [PATCH v3 03/12] dt-bindings: riscv: Add Allwinner D1/D1s board compatibles Samuel Holland
2022-12-08 9:02 ` [PATCH v3 04/12] riscv: dts: allwinner: Add the D1/D1s SoC devicetree Samuel Holland
2022-12-19 10:57 ` Heiko Stübner
2022-12-08 9:02 ` [PATCH v3 05/12] riscv: dts: allwinner: Add MangoPi MQ devicetree Samuel Holland
2022-12-08 9:02 ` [PATCH v3 06/12] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree Samuel Holland
2022-12-08 9:02 ` [PATCH v3 07/12] riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees Samuel Holland
2022-12-08 9:02 ` [PATCH v3 08/12] riscv: dts: allwinner: Add MangoPi MQ Pro devicetree Samuel Holland
2022-12-08 9:02 ` [PATCH v3 09/12] riscv: dts: allwinner: Add Dongshan Nezha STU devicetree Samuel Holland
2022-12-08 9:02 ` [PATCH v3 10/12] riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees Samuel Holland
2022-12-08 9:02 ` [PATCH v3 11/12] riscv: Add the Allwinner SoC family Kconfig option Samuel Holland
2022-12-08 9:10 ` Conor Dooley
2022-12-08 9:02 ` [PATCH v3 12/12] riscv: defconfig: Enable the Allwinner D1 platform and drivers Samuel Holland
2022-12-08 9:09 ` Conor Dooley
2022-12-19 10:55 ` Heiko Stübner
2022-12-17 17:43 ` Conor Dooley [this message]
2022-12-19 9:43 ` [PATCH v3 00/12] riscv: Allwinner D1/D1s platform support Icenowy Zheng
2022-12-19 17:00 ` Conor Dooley
2022-12-19 11:13 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y53/ruLoggBDXozF@spud \
--to=conor@kernel.org \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jernej.skrabec@gmail.com \
--cc=jszhang@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).