Re: [PATCH 7/9] PCI: qcom: add support for IPQ8074 Gen3 port

[Lorenzo Pieralisi <lpieralisi@kernel.org>]

On Thu, Nov 17, 2022 at 01:28:37PM -0600, Bjorn Helgaas wrote:
> Hi Robert,
> 
> If you post a v2 for any reason, capitalize the subject line to match
> previous history:
> 
>   PCI: qcom: Rename host-init error label
>   PCI: qcom: Drop unused post_deinit callback
>   PCI: qcom: Sort device-id table
>   PCI: qcom: Clean up IP configurations
>   ...

If he could do that while rebasing on top of my current pci/qcom branch
that would be ideal, I tried to cherry-pick patches 5,6,7 but 5 does not
apply.

Thanks,
Lorenzo

> 
> On Wed, Nov 16, 2022 at 10:48:39PM +0100, Robert Marko wrote:
> > IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported.
> > Add compatible for Gen3 port which uses the same controller as IPQ6018.
> > 
> > Signed-off-by: Robert Marko <robimarko@gmail.com>
> > ---
> >  drivers/pci/controller/dwc/pcie-qcom.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 77e5dc7b88ad..97e8510c53fb 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -1817,6 +1817,7 @@ static const struct of_device_id qcom_pcie_match[] = {
> >  	{ .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
> >  	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
> >  	{ .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
> > +	{ .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
> >  	{ .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
> >  	{ .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
> >  	{ .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 },
> > -- 
> > 2.38.1
> >