Re: [PATCH v2 15/19] clk: imx6ul: fix enet1 gate configuration

[Abel Vesa <abel.vesa@linaro.org>]

On 23-01-17 07:14:49, Oleksij Rempel wrote:
> According to the "i.MX 6UltraLite Applications Processor Reference Manual,
> Rev. 2, 03/2017", BIT(13) is ENET1_125M_EN which is not controlling root
> of PLL6. It is controlling ENET1 separately.
> 
> So, instead of this picture (implementation before this patch):
> fec1 <- enet_ref (divider) <---------------------------,
>                                                        |- pll6_enet (gate)
> fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´
> 
> we should have this one (after this patch):
> fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-,
>                                                        |- pll6_enet
> fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´
> 
> With this fix, the RMII reference clock will be turned off, after
> setting network interface down on each separate interface
> (ip l s dev eth0 down). Which was not working before, on system with both
> FECs enabled.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

I'm OK with this. Maybe a fixes tag ?

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>

> ---
>  drivers/clk/imx/clk-imx6ul.c             | 7 ++++---
>  include/dt-bindings/clock/imx6ul-clock.h | 3 ++-
>  2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
> index 67a7a77ca540..c3c465c1b0e7 100644
> --- a/drivers/clk/imx/clk-imx6ul.c
> +++ b/drivers/clk/imx/clk-imx6ul.c
> @@ -176,7 +176,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
>  	hws[IMX6UL_CLK_PLL3_USB_OTG]	= imx_clk_hw_gate("pll3_usb_otg",	"pll3_bypass", base + 0x10, 13);
>  	hws[IMX6UL_CLK_PLL4_AUDIO]	= imx_clk_hw_gate("pll4_audio",	"pll4_bypass", base + 0x70, 13);
>  	hws[IMX6UL_CLK_PLL5_VIDEO]	= imx_clk_hw_gate("pll5_video",	"pll5_bypass", base + 0xa0, 13);
> -	hws[IMX6UL_CLK_PLL6_ENET]	= imx_clk_hw_gate("pll6_enet",	"pll6_bypass", base + 0xe0, 13);
> +	hws[IMX6UL_CLK_PLL6_ENET]	= imx_clk_hw_fixed_factor("pll6_enet",	"pll6_bypass", 1, 1);
>  	hws[IMX6UL_CLK_PLL7_USB_HOST]	= imx_clk_hw_gate("pll7_usb_host",	"pll7_bypass", base + 0x20, 13);
>  
>  	/*
> @@ -205,12 +205,13 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
>  	hws[IMX6UL_CLK_PLL3_PFD2] = imx_clk_hw_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,	 2);
>  	hws[IMX6UL_CLK_PLL3_PFD3] = imx_clk_hw_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,	 3);
>  
> -	hws[IMX6UL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
> +	hws[IMX6UL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet1_ref", "pll6_enet", 0,
>  			base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
>  	hws[IMX6UL_CLK_ENET2_REF] = clk_hw_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
>  			base + 0xe0, 2, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
>  
> -	hws[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_hw_gate("enet_ref_125m", "enet2_ref", base + 0xe0, 20);
> +	hws[IMX6UL_CLK_ENET1_REF_125M] = imx_clk_hw_gate("enet1_ref_125m", "enet1_ref", base + 0xe0, 13);
> +	hws[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_hw_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
>  	hws[IMX6UL_CLK_ENET_PTP_REF]	= imx_clk_hw_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
>  	hws[IMX6UL_CLK_ENET_PTP]	= imx_clk_hw_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
>  
> diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
> index 79094338e6f1..b44920f1edb0 100644
> --- a/include/dt-bindings/clock/imx6ul-clock.h
> +++ b/include/dt-bindings/clock/imx6ul-clock.h
> @@ -256,7 +256,8 @@
>  #define IMX6UL_CLK_GPIO4		247
>  #define IMX6UL_CLK_GPIO5		248
>  #define IMX6UL_CLK_MMDC_P1_IPG		249
> +#define IMX6UL_CLK_ENET1_REF_125M	250
>  
> -#define IMX6UL_CLK_END			250
> +#define IMX6UL_CLK_END			251
>  
>  #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
> -- 
> 2.30.2
>