From: Conor Dooley <conor@kernel.org>
To: Nylon Chen <nylon.chen@sifive.com>
Cc: aou@eecs.berkeley.edu, emil.renner.berthing@canonical.com,
geert+renesas@glider.be, heiko@sntech.de,
krzysztof.kozlowski+dt@linaro.org, palmer@dabbelt.com,
paul.walmsley@sifive.com, robh+dt@kernel.org,
thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de,
devicetree@vger.kernel.org, linux-pwm@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
nylon7717@gmail.com, zong.li@sifive.com, greentime.hu@sifive.com,
vincent.chen@sifive.com
Subject: Re: [PATCH v2 1/2] riscv: dts: sifive: unleashed/unmatched: Remove PWM controlled LED's active-low properties
Date: Tue, 31 Jan 2023 18:31:59 +0000 [thread overview]
Message-ID: <Y9len4GinXQ101xr@spud> (raw)
In-Reply-To: <20230130093229.27489-2-nylon.chen@sifive.com>
[-- Attachment #1: Type: text/plain, Size: 3483 bytes --]
Hey Nylon,
On Mon, Jan 30, 2023 at 05:32:28PM +0800, Nylon Chen wrote:
> This removes the active-low properties of the PWM-controlled LEDs in
> the HiFive Unmatched device tree.
>
> The reference is hifive-unleashed-a00.pdf[0] and hifive-unmatched-schematics-v3.pdf[1].
>
> [0]: https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf
> [1]: https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf
Ideally these would be:
Link: https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf [0]
so that they integrate nice with the git trailers mechanism.
If you resend, please update them to regular link tags.
I checked out the circuits last time around and agreed that they should
not be active-low.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
I expect that both patches will go through the PWM tree together, so:
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
>
> Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
> ---
> arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 4 ----
> arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 4 ----
> 2 files changed, 8 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> index 900a50526d77..7a9f336a391c 100644
> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> @@ -50,7 +50,6 @@ led-controller {
>
> led-d1 {
> pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_GREEN>;
> max-brightness = <255>;
> label = "d1";
> @@ -58,7 +57,6 @@ led-d1 {
>
> led-d2 {
> pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_GREEN>;
> max-brightness = <255>;
> label = "d2";
> @@ -66,7 +64,6 @@ led-d2 {
>
> led-d3 {
> pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_GREEN>;
> max-brightness = <255>;
> label = "d3";
> @@ -74,7 +71,6 @@ led-d3 {
>
> led-d4 {
> pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_GREEN>;
> max-brightness = <255>;
> label = "d4";
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> index 07387f9c135c..11f08a545ee6 100644
> --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> @@ -52,7 +52,6 @@ led-controller-1 {
>
> led-d12 {
> pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_GREEN>;
> max-brightness = <255>;
> label = "d12";
> @@ -69,19 +68,16 @@ multi-led {
>
> led-red {
> pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_RED>;
> };
>
> led-green {
> pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_GREEN>;
> };
>
> led-blue {
> pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
> - active-low;
> color = <LED_COLOR_ID_BLUE>;
> };
> };
> --
> 2.36.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2023-01-31 18:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-30 9:32 [PATCH v2 0/2] Change PWM-controlled LED pin active mode and algorithm Nylon Chen
2023-01-30 9:32 ` [PATCH v2 1/2] riscv: dts: sifive: unleashed/unmatched: Remove PWM controlled LED's active-low properties Nylon Chen
2023-01-31 18:31 ` Conor Dooley [this message]
2023-02-01 8:59 ` Nylon Chen
2023-01-30 9:32 ` [PATCH v2 2/2] pwm: sifive: change the PWM controlled LED algorithm Nylon Chen
2023-01-30 9:53 ` Geert Uytterhoeven
2023-02-01 8:51 ` Nylon Chen
2023-01-30 10:17 ` Uwe Kleine-König
2023-02-01 8:56 ` Nylon Chen
2023-03-01 9:20 ` Uwe Kleine-König
2023-03-02 10:41 ` Nylon Chen
2023-02-03 8:06 ` Nylon Chen
2023-02-21 5:54 ` Nylon Chen
2023-09-08 10:41 ` Nylon Chen
2023-09-08 14:49 ` Uwe Kleine-König
2023-09-10 13:16 ` Nylon Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y9len4GinXQ101xr@spud \
--to=conor@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=geert+renesas@glider.be \
--cc=greentime.hu@sifive.com \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=nylon.chen@sifive.com \
--cc=nylon7717@gmail.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=vincent.chen@sifive.com \
--cc=zong.li@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).