* [PATCH V1 0/2] ARM: dts: qcom: Add device node support for TSENS in SC7280. @ 2021-04-21 11:44 Rajeshwari 2021-04-21 11:44 ` [PATCH V1 1/2] ARM: dts: qcom: Add device node support for TSENS in Rajeshwari 2021-04-21 11:44 ` [PATCH V1 2/2] dt-bindings: thermal: tsens: Add configuration in yaml Rajeshwari 0 siblings, 2 replies; 5+ messages in thread From: Rajeshwari @ 2021-04-21 11:44 UTC (permalink / raw) To: amitk, thara.gopinath, agross, bjorn.andersson, rui.zhang, daniel.lezcano, robh+dt Cc: linux-pm, linux-arm-msm, devicetree, linux-kernel, sanm, Rajeshwari Add TSENS node, user thermal zone configurations, critical interrupt, cooling maps and configuration in yaml for TSENS in SC7280. Dependencies: https://lore.kernel.org/patchwork/project/lkml/list/?series=487403 https://lore.kernel.org/patchwork/patch/1410952/ Rajeshwari (2): ARM: dts: qcom: Add device node support for TSENS in SC7280. dt-bindings: thermal: tsens: Add configuration in yaml .../devicetree/bindings/thermal/qcom-tsens.yaml | 1 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 874 +++++++++++++++++++++ 2 files changed, 875 insertions(+) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH V1 1/2] ARM: dts: qcom: Add device node support for TSENS in 2021-04-21 11:44 [PATCH V1 0/2] ARM: dts: qcom: Add device node support for TSENS in SC7280 Rajeshwari @ 2021-04-21 11:44 ` Rajeshwari 2021-04-22 17:38 ` Matthias Kaehlcke 2021-04-21 11:44 ` [PATCH V1 2/2] dt-bindings: thermal: tsens: Add configuration in yaml Rajeshwari 1 sibling, 1 reply; 5+ messages in thread From: Rajeshwari @ 2021-04-21 11:44 UTC (permalink / raw) To: amitk, thara.gopinath, agross, bjorn.andersson, rui.zhang, daniel.lezcano, robh+dt Cc: linux-pm, linux-arm-msm, devicetree, linux-kernel, sanm, Rajeshwari Add TSENS node, user thermal zone configurations, critical interrupt and cooling maps for TSENS in SC7280. Signed-off-by: Rajeshwari <rkambl@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 874 +++++++++++++++++++++++++++++++++++ 1 file changed, 874 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 2cc4785..05b6cd7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -70,6 +71,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -88,6 +90,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -103,6 +106,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -118,6 +122,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -133,6 +138,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -148,6 +154,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -163,6 +170,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -178,6 +186,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -825,6 +834,28 @@ interrupt-controller; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <12>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7280-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; @@ -1118,6 +1149,849 @@ }; }; + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu10-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu10_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu10_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu10_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu11-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu11_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu11_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu11_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0_crit: aoss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss0_crit: gpuss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss1_crit: gpuss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1_crit: aoss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + nspss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + nspss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss0_crit: nspss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + nspss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss1_crit: nspss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video_crit: video_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr_crit: ddr_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdmss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss0_crit: mdmss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + mdmss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss1_crit: mdmss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + mdmss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss2_crit: mdmss2_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + mdmss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss3_crit: mdmss3_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + camera0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0_crit: camera0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH V1 1/2] ARM: dts: qcom: Add device node support for TSENS in 2021-04-21 11:44 ` [PATCH V1 1/2] ARM: dts: qcom: Add device node support for TSENS in Rajeshwari @ 2021-04-22 17:38 ` Matthias Kaehlcke 0 siblings, 0 replies; 5+ messages in thread From: Matthias Kaehlcke @ 2021-04-22 17:38 UTC (permalink / raw) To: Rajeshwari Cc: amitk, thara.gopinath, agross, bjorn.andersson, rui.zhang, daniel.lezcano, robh+dt, linux-pm, linux-arm-msm, devicetree, linux-kernel, sanm On Wed, Apr 21, 2021 at 05:14:01PM +0530, Rajeshwari wrote: > Subject: ARM: dts: qcom: Add device node support for TSENS in The most important thing this patch does is to add the thermal zones, this should be reflected in the subject. Not strictly necessary, but I'd suggest a separate patch to add the TSENS nodes and then one for the thermal zones. > > Add TSENS node, user thermal zone configurations, critical interrupt > and cooling maps for TSENS in SC7280. > > Signed-off-by: Rajeshwari <rkambl@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 874 +++++++++++++++++++++++++++++++++++ > 1 file changed, 874 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 2cc4785..05b6cd7 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -12,6 +12,7 @@ > #include <dt-bindings/power/qcom-aoss-qmp.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > +#include <dt-bindings/thermal/thermal.h> > > / { > interrupt-parent = <&intc>; > @@ -70,6 +71,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_0>; > + #cooling-cells = <2>; > L2_0: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -88,6 +90,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_100>; > + #cooling-cells = <2>; > L2_100: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -103,6 +106,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_200>; > + #cooling-cells = <2>; > L2_200: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -118,6 +122,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_300>; > + #cooling-cells = <2>; > L2_300: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -133,6 +138,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_400>; > + #cooling-cells = <2>; > L2_400: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -148,6 +154,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_500>; > + #cooling-cells = <2>; > L2_500: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -163,6 +170,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_600>; > + #cooling-cells = <2>; > L2_600: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -178,6 +186,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_700>; > + #cooling-cells = <2>; > L2_700: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -825,6 +834,28 @@ > interrupt-controller; > }; > > + tsens0: thermal-sensor@c263000 { > + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; > + reg = <0 0x0c263000 0 0x1ff>, /* TM */ > + <0 0x0c222000 0 0x1ff>; /* SROT */ > + #qcom,sensors = <15>; > + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow","critical"; > + #thermal-sensor-cells = <1>; > + }; > + > + tsens1: thermal-sensor@c265000 { > + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; > + reg = <0 0x0c265000 0 0x1ff>, /* TM */ > + <0 0x0c223000 0 0x1ff>; /* SROT */ > + #qcom,sensors = <12>; > + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow","critical"; > + #thermal-sensor-cells = <1>; > + }; > + > aoss_qmp: power-controller@c300000 { > compatible = "qcom,sc7280-aoss-qmp"; > reg = <0 0x0c300000 0 0x100000>; > @@ -1118,6 +1149,849 @@ > }; > }; > > + thermal_zones: thermal-zones { > + cpu0-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 1>; > + > + trips { > + cpu0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu0_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu0_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; not super-important, but is a hysteresis actually needed for a critical trip point? The system is supposed to shut down when the critical trip point is reached, so I'd expect that the hysteresis doesn't do anything. > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu0_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu0_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu1-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 2>; > + > + trips { > + cpu1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu1_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu1_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu1_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu1_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu2-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 3>; > + > + trips { > + cpu2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu2_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu2_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu2_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu2_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu3-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 4>; > + > + trips { > + cpu3_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu3_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu3_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu3_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu3_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu4-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 7>; > + > + trips { > + cpu4_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu4_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu4_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu5-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 8>; > + > + trips { > + cpu5_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu5_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu5_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu6-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 9>; > + > + trips { > + cpu6_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu6_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu6_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu7-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 10>; > + > + trips { > + cpu7_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu7_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu7_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu8-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 11>; > + > + trips { > + cpu8_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu8_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu8_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu8_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu8_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu9-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 12>; > + > + trips { > + cpu9_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu9_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu9_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu9_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu9_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu10-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 13>; > + > + trips { > + cpu10_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu10_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu10_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu10_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu10_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu11-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 14>; > + > + trips { > + cpu11_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu11_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu11_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu11_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu11_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + aoss0-thermal { Also not super-important, but I wonder what the order of the thermal zones should be. Currently this seems to be a mix of 'most important first', group certain things and order by sensor ID. My initial suggestion would be to use alphabetical order, though that would put a few 'less important' zones before the CPUs. An possible alternative could be 'CPUs first' followed by alphabetical order. In any case, it's not really important, just wondered if there should be a specific ordering. If you keep more or less the current order then it seems the aoss0 and aoss1 should be grouped together. > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 0>; > + > + trips { > + aoss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + aoss0_crit: aoss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpuss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 5>; > + > + trips { > + cpuss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + cpuss0_crit: cluster0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpuss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 6>; > + > + trips { > + cpuss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + cpuss1_crit: cluster0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + gpuss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 1>; > + > + trips { > + gpuss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + gpuss0_crit: gpuss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + gpuss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 2>; > + > + trips { > + gpuss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + gpuss1_crit: gpuss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + aoss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 0>; > + > + trips { > + aoss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + aoss1_crit: aoss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + nspss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 3>; > + > + trips { > + nspss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + nspss0_crit: nspss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + nspss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 4>; > + > + trips { > + nspss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + nspss1_crit: nspss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + video-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 5>; > + > + trips { > + video_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + video_crit: video_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + ddr-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 6>; > + > + trips { > + ddr_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + ddr_crit: ddr_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 7>; > + > + trips { > + mdmss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss0_crit: mdmss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 8>; > + > + trips { > + mdmss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss1_crit: mdmss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss2-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 9>; > + > + trips { > + mdmss2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss2_crit: mdmss2_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss3-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 10>; > + > + trips { > + mdmss3_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss3_crit: mdmss3_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + camera0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 11>; > + > + trips { > + camera0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + camera0_crit: camera0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > timer { > compatible = "arm,armv8-timer"; > interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation > ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH V1 2/2] dt-bindings: thermal: tsens: Add configuration in yaml 2021-04-21 11:44 [PATCH V1 0/2] ARM: dts: qcom: Add device node support for TSENS in SC7280 Rajeshwari 2021-04-21 11:44 ` [PATCH V1 1/2] ARM: dts: qcom: Add device node support for TSENS in Rajeshwari @ 2021-04-21 11:44 ` Rajeshwari 2021-04-22 17:45 ` Matthias Kaehlcke 1 sibling, 1 reply; 5+ messages in thread From: Rajeshwari @ 2021-04-21 11:44 UTC (permalink / raw) To: amitk, thara.gopinath, agross, bjorn.andersson, rui.zhang, daniel.lezcano, robh+dt Cc: linux-pm, linux-arm-msm, devicetree, linux-kernel, sanm, Rajeshwari Added configuration in dt-bindings for SC7280. Signed-off-by: Rajeshwari <rkambl@codeaurora.org> --- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index b7a832f..23cf265 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -46,6 +46,7 @@ properties: - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,sc7180-tsens + - qcom,sc7280-tsens - qcom,sdm845-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH V1 2/2] dt-bindings: thermal: tsens: Add configuration in yaml 2021-04-21 11:44 ` [PATCH V1 2/2] dt-bindings: thermal: tsens: Add configuration in yaml Rajeshwari @ 2021-04-22 17:45 ` Matthias Kaehlcke 0 siblings, 0 replies; 5+ messages in thread From: Matthias Kaehlcke @ 2021-04-22 17:45 UTC (permalink / raw) To: Rajeshwari Cc: amitk, thara.gopinath, agross, bjorn.andersson, rui.zhang, daniel.lezcano, robh+dt, linux-pm, linux-arm-msm, devicetree, linux-kernel, sanm On Wed, Apr 21, 2021 at 05:14:02PM +0530, Rajeshwari wrote: > Subject: dt-bindings: thermal: tsens: Add configuration in yaml This subject isn't really useful. The fact that the format of the binding is yaml is irrelevant here. What is important is that you are adding the compatible string for the SC7280 to the TSENS binding. This should be reflected in the subject. Also this is patch [2/2] and patch [1/2] adds DT entries with the new compatible string. The binding should be defined before adding new entries, hence the order of the patches should be inversed. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-04-22 17:45 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-04-21 11:44 [PATCH V1 0/2] ARM: dts: qcom: Add device node support for TSENS in SC7280 Rajeshwari 2021-04-21 11:44 ` [PATCH V1 1/2] ARM: dts: qcom: Add device node support for TSENS in Rajeshwari 2021-04-22 17:38 ` Matthias Kaehlcke 2021-04-21 11:44 ` [PATCH V1 2/2] dt-bindings: thermal: tsens: Add configuration in yaml Rajeshwari 2021-04-22 17:45 ` Matthias Kaehlcke
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).