From: Rob Herring <robh@kernel.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, sibis@codeaurora.org,
sboyd@kernel.org, mpubbise@codeaurora.org
Subject: Re: [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
Date: Wed, 11 Aug 2021 11:37:39 -0600 [thread overview]
Message-ID: <YRQK4xgxTAD2ALME@robh.at.kernel.org> (raw)
In-Reply-To: <1628618483-664-3-git-send-email-pillair@codeaurora.org>
On Tue, Aug 10, 2021 at 11:31:22PM +0530, Rakesh Pillai wrote:
> Add WPSS PIL loading support for SC7280 SoCs.
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> .../bindings/remoteproc/qcom,hexagon-v56.yaml | 79 ++++++++++++++++++++--
> 1 file changed, 74 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> index 5f3558e..9ae433c6 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> @@ -17,6 +17,7 @@ properties:
> compatible:
> enum:
> - qcom,qcs404-cdsp-pil
> + - qcom,sc7280-wpss-pil
> - qcom,sdm845-adsp-pil
>
> reg:
> @@ -26,25 +27,30 @@ properties:
>
> interrupts-extended:
> minItems: 5
> - maxItems: 5
> + maxItems: 6
>
> interrupt-names:
> minItems: 5
> - maxItems: 5
> + maxItems: 6
>
> clocks:
> - minItems: 7
> + minItems: 3
Patch 1 shows 3 clocks are valid...
> maxItems: 8
> description:
> List of phandles and clock specifier pairs for the Hexagon,
> per clock-names below.
>
> clock-names:
> - minItems: 7
> + minItems: 3
> maxItems: 8
>
> power-domains:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> +
> + power-domain-names:
> + minItems: 1
> + maxItems: 2
>
> resets:
> minItems: 1
> @@ -92,6 +98,7 @@ required:
> - clocks
> - clock-names
> - power-domains
> + - power-domain-names
It's not backwards compatible to add a required property.
> - qcom,halt-regs
> - memory-region
> - qcom,smem-states
> @@ -129,6 +136,31 @@ allOf:
> compatible:
> contains:
> enum:
> + - qcom,sc7280-wpss-pil
> + then:
> + properties:
> + interrupts-extended:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> + - description: Shutdown acknowledge interrupt
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> + - const: shutdown-ack
The items lists can go in the main section with 'minItems: 5' and just
'minItems: 6' here.
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> - qcom,sdm845-adsp-pil
> then:
> properties:
> @@ -211,6 +243,26 @@ allOf:
> power-domains:
> items:
> - description: CX power domain
> + power-domain-names:
> + items:
> + - const: cx
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sc7280-wpss-pil
> + then:
> + properties:
> + power-domains:
> + items:
> + - description: CX power domain
> + - description: MX power domain
> + power-domain-names:
> + items:
> + - const: cx
> + - const: mx
As 'cx' is always the first entry, the 'items' lists here can be moved
to the main section and you just need minItems or maxItems in the
if/then.
>
> - if:
> properties:
> @@ -244,6 +296,23 @@ allOf:
> items:
> - const: restart
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sc7280-wpss-pil
> + then:
> + properties:
> + resets:
> + items:
> + - description: AOSS restart
> + - description: PDC SYNC
> + reset-names:
> + items:
> + - const: restart
> + - const: pdc_sync
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> --
> 2.7.4
>
>
next prev parent reply other threads:[~2021-08-11 17:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-10 18:01 [PATCH v2 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-08-10 18:01 ` [PATCH v2 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
2021-08-10 18:01 ` [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
2021-08-11 17:24 ` Rob Herring
2021-09-09 8:36 ` pillair
2021-08-11 17:37 ` Rob Herring [this message]
2021-08-10 18:01 ` [PATCH v2 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YRQK4xgxTAD2ALME@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpubbise@codeaurora.org \
--cc=pillair@codeaurora.org \
--cc=sboyd@kernel.org \
--cc=sibis@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).